I know you can save layer styles easily and apply them to other layers.
Can you do the same thing for fonts? I tried to make a tool preset, but I heard an error bleep whenever I clicked the new preset button and had the flashing typing bar in the text I wanted to save.
how to sort (alphabetically, for instance) the Graphic and Text styles in the Graphic and Text Docker? I need the styles "Roads-county", "Roads-State" & "Roads-US" near each other and "apples" listed first.
View 9 Replies View RelatedI have been trying to get a nice gold style for some time now, and finally created one that I like using a few different styles togeather.
With that being said What I did was break apart the FX into Multiple Layers, and Create the Effect that I wanted.
Now that I have the effect that I want, I want to put them back into the FX section on my text, so I can create a style of the new style I created, and Merge them back with the Text.
The problem I am having is that I like the look I have right now, and would like it to become a new style, so that if I change the text or font, the rest of the effects will change accordingly. Right now The text Changes but the shadow doesn`t, inner glow doesn`t ect. so the resulr is a ghost image with the newly changed font over top but the shadowing effects underneith remaining in the old font.
im trying to upload new styles of text to my photoshop program, is 7.0. i know how to upload new brush's and all that, but i cant figure out how to do the same for text..
View 9 Replies View RelatedHow to apply photoshop styles to an arabic text?
View 4 Replies View RelatedI love the new object styles docker for text, much easier to use, much more reliable and it doesn't insist styling should apply to entire paragraphs. The only problem i'm having is setting tabs for styles. The only way i have found to do it so far is to set up a paragraph text box the way i want it and use 'Copy Properties From...' Is there a simple way to edit a text style's tab settings?
View 1 Replies View RelatedI created a Corel Draw template (*.cdt). Everything was working well until, for some unknown reason, the text direction for Artistic Text and Paragraph Text (and all Bullet styles) switched to right-to-left. I do not recall doing anything to cause this.
Also, the only place that I can find the text direction option is in the Text > Options > Guidelines > Styles > Edit button for fonts > Paragraph Tab (in Format Text dialog box). The text direction shows Right-to-Left and it is grayed out - not available!
My system is Hebrew enabled and Hebrew is a right-to-left language. However, I do not use and have never used Hebrew in any form in CorelDraw.
Also, there is no information at all in the User's Guide or on-line help.The words "direction" and "text" do not appear together.
2 questions:
The important one - How can I access the text direction property?
The less important one - What could I have inadvertently done to change the text direction from L-2-R to R-2-L?
My old boss started up his own company and I am wanting to create dim styles and text styles for this said company. Right now, we use ones that have been carried over in projects from previous employers, and they are driving me nuts. Even when I worked at said employer, i always thought things could be handle much simpler than what they had in place.
creating Dim styles and Text styles that we can use from here forward. My problem is, I havent created one since school and forgot all about how too
I am using autocad civil 3d 2012 and know they have annotative dimensions and what not, so can these be used to make life simpler?
In other words, can I create one dim style that can be used in different projects/sheets that have different scales?and last but not least, the great old debate, is it easier to create dim styles for annotating in model space or just create one and do all my annotating in paper space?
I have a few styles in my Presets/Styles folder but they don't show up when I try to load them from the Preset Manager --
View 2 Replies View RelatedProblem with text styles: I have a big body of text, with several styles applied. The problem is, editing one of the styles does not affect the text that has this style applied to it. Changing the style or creating a new style does not work - it's like these particular parts of text are immune to editing the style. It works only when I select the text and manually apply the style. Further editing the style does not affect this text, I have to manually select it and apply the style again.
View 6 Replies View RelatedAs with any upgrade to Corel over the past decade, they change things on new versions and hide them! I've been using since v1.0 (which instantly became v1.1 upon release).
I JUST installed v X6 and off to my first problem within 10 minutes.
The old menu in X5 used to have a docker called "Graphic and Text" which is no longer available in X6. After some research, it looks like the "apply a style or style set to an object" is the way to go, HOWEVER if I right click on the text as suggested to find the "Object Styles" menu, the sub menu is a blank little rectangle that won't display the menu items.
How to copy a style to a menu and then apply it as well in X6?
When I want to establish a new annotative text style, and I'm in the Text Styles dialog box, in the "Size" box, why will it not let me enter a Paper Text Height of 3/32"??? Every time I try it defaults to either 1/16" or 1/8". I have checked the Annotative box.
View 2 Replies View RelatedI can't find information for how a block's text is utilized in a style. Here are some details. I have a unitless block with a non annotative text size of 10. This block is part of a style with a size 'use drawing scale' of .12. At 40 scale, it inserts at 4.8 size. If I change the text size to 8 it inserts at 4.8. If I hcange the text size to 5, it inserts at 3.
My question is how are the annotation scale, block text size, and style insert size tied together? OR are there other variables influencing the scaling? I have attached a screen shot of some of my unofficial tests.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I just upgraded from AutoCAD LT 2005 to AutoCAD LT 2012. I commonly used a font that, on the 2005 version, was called a1.shx. It has been replaced, on the 2012 version, with archstyl.shx. When I go to "Manage Text Styles", under the "Font Name" there is a yellow triangle with an exclamation point in it before the font name "archstyl.shx". I am assuming this means that the font is not currently available on my system because it is replaced with the simplex.shx (which I read was the default alternate font under "substitute fonts" in the users guide). There is not a font style on my current system that suffices as a replacement to the font I used on the 2005 version of AutoCAD LT. Is there anyway to import the old font to AutoCAD 2012? Is there a way to put new fonts on my system so that I can find an adequate replacement?
View 6 Replies View RelatedI am doing my general notes
I would like the top text to be larger and a different text style than the next text can this be done
for example a title of times new roman .08
and the rest of the notes to be simplex .06
( know its not simplex but that wasnt an option)
I've found nearly everything I need to draw my tables, but cannot find how to set the text styles for the Title, Header and Data cells.
There must be a way, but it is hidden under an obscure method or property title which I can't identify or find on the internet or in the Object Browser.
How do I change the text style for one layer only? I already have some text in one font on a layer but now I want to create lables in a different font but when I change the text style while that layer is active both layers change.
View 6 Replies View RelatedI have created some new layer and Text styles.
I would like to set the new Text styles to the new layers, but cannot find a way to do so.
Inventor 2010
My some autocad files were slowed down. For example i wait about 10 seconds when i edit a text.
Afterwards i see too many text styles in format/text styles command. i want to delete text styles but i can't.
it says "style in use, can't be deleted". I dont know where these text styles come from. Other files when they are infected with the virus, such as. Also have $ signs in text style names.
Is there a way, maybe by script, to have a paragraph style include some default text?
For example, if I assign an empty paragrahp the Note style, It would display as formated, but would include the string "NOTE:"^t (i.e. NOTE: with a tab character following).
or perhaps the style Caution might display as formatted with the word caution in all caps underline (CAUTION) followed by a forced line break (^n).
I have big document with a lot of headers and subheaders that I need to move around. It's too big of a job to do it manually so I want to use paragraph styles for this but I can't seem to find where to set this. Is it even possible?
View 3 Replies View RelatedUsing ACAD LT 2009. Update 3.
I've tried some of the settings for the mleader text placement. I'm trying to get the text to sit on top of a horizontal line. And an angled leader from the horizontal line to the object I am describing, ending in a dot.
All this is working fine, the lines, dot, etc. It's set for straight, not spline. And max. 2 leader points. All works as I want here.
What isn't working well is the text placement. I am able to have the text be horizontal, this works. But I can't get it to have the text above the horizontal line. I can set the leader connection to underline top line, or underline bottom line, or underline all text. These 3 choices seem sort of retarded. The first two put the text right on the line with no space. Doesn't look good. The third choice puts the text a bit above the line, looks perfect, except that there is now an additional line below the horizontal leader line, and that looks dumb.
Am I missing something? Has this feature matured more in later versions?
I'm new to this company and still learning the ropes on there standards and how they do things. I have a floor plan and when I was cleaning it up, I noticed some extraneous linetypes and text styles. Being the good drafter that I am, I tried to clean it up, but to no avail. I even tried to make a new file, but when I copy clipped it in, it brings in the extra linetypes and text styles. Ran audit, but didn't find anything unusual. I even deleted everything but can't seem to purge out the extra linetypes and text styles. How to remove them? see attached for the drawing file. running autocad architecture 2012 on windows 7 64 bit machine. and the files was originally created in revit, that was converted out.
View 9 Replies View RelatedAny way to locate where text styles are located within a drawng. I am creating templates and some text styles are being carried from one template to another when I create them and I would like to delete certain text styles. I have looked around the drawing, but cannot seem to locate them.
View 9 Replies View RelatedI have a drawing that has hundreds of text styles that do not seem to be used by anything that I cannot purge. I have even deleted everything in the entire drawing, and it still says that the text styles are in use. Is there a way to override the purge since I know that the text is not in use.
View 9 Replies View Relatedif i have a size indicated in my text style and i change the size from the style controls, updating the style, should all the instances not change to comply? This is how styles work in other software and how I intuit controlling this parameter.
View 1 Replies View Relatedwhy my dimstyle appears different when I use different versions of AutoCAD.
In LT it is correct (left hand image), both styles are STANDARD font but in the full version (right hand image) the suffix text style is ROMANS.
I was looking a lot after a simple tool, to can remove or purge unsed textstyles.
View 1 Replies View RelatedI would like to preface this post by stating, for the purposes of this message, that I have absolutely no understanding of the workings of AutoCAD. I have looked at many forum discussions concerning my issue and I am simply unable to understand the terminology and/or concepts being described.
I recently purchased a new computer for my office. Accordingly, I needed to install AutoCAD on this new machine. All of the machines in my office are running AutoCAD 2011. However, after addressing some licensing issues with AutoDesk, I received a license and installer for AutoCAD 2012. Everything was installed correctly (as far as I understand) and the program itself is working fine. The problem I am running into involves the text style for the files I open:
For files saved on AutoCAD 2011, the text style used is Arial. Simple; no custom fonts. However, when I open that same file in AutoCAD 2012, the text style for the entire file has changed to Franklin Gothic Book. (Note that all files are accessible from all computers in the office through a network drive)
That is my only understanding of the situation. As I mentioned earlier I have very little understanding of the workings of AutoCAD. I have had this problem for almost a week now and I am no closer to understand this issue, much less solving it.
i had been using autocad for almost 10 years now and i always have the newer version for my line of work.
i am having trouble with the excessive styles that shows whenever i copy and paste then the problems occur after that most often. copy paste problems, fatal errors, and my computer hangs most of the time.
I was wondering is there a way to export text, dimension, leaders and table styles? I have been trying for a while but can figure it out not even sure that you can.
View 5 Replies View Related