I've found nearly everything I need to draw my tables, but cannot find how to set the text styles for the Title, Header and Data cells.
There must be a way, but it is hidden under an obscure method or property title which I can't identify or find on the internet or in the Object Browser.
I was wondering is there a way to export text, dimension, leaders and table styles? I have been trying for a while but can figure it out not even sure that you can.
View 5 Replies View RelatedI am building a COM interop using visual basic .NET
I've managed to add a new table, I wish to give the user an option to choose which table style to apply.
I just cannot find how to get the document's available table styles.
I'm developing for AutoCAD 2012.
How to reuse table styles? I have tried design center but when I bring in the table style it changes the sizes. I have also tried to create a block, but when I explode it to modify the table cells it will change the sizes still.
View 3 Replies View Relatedwe have tables as a standard in the office, each table is of the same table style on the same layer.all properties for all table borders are set to Bylayer (G-ANNO-TEXT color70).
the issue is- in AutoCAD 2014 open a template dwg with the Layer G-ANNO-TEXT in the template place the table on the current layer it does not adopt the properties of any other layer until you go into tablestyles and modify the settings for all borders
We have three divisions in my company. Each division uses a different set of drawing templates.
With all of that said, in my division we are trying to setup a certain said standard that was copied from the out of the box standard ANSI one as a starting point. We were hoping to have this standard reside only in our drawing templates, but the way the styles is handling it, it would appear that this standard has to be updated/added to the global styles library.
Is this a true statement that this has to be a global styles update or is there a way to have a said standard be the default setting within just certain drawing templates without being seen or affecting other drawing templates?
In ACA2008 there seems to be a maximum of 10 Cell Styles allowed in a Table Style? When I try to make a new 11th style, one of the existing 10 styles gets supplanted by the new style.
View 3 Replies View RelatedI have been using 3 common table styles for our drawings and use design center to drag them (from one drawing, where they all reside) into my drawings. I have recently tried this and for some unknown reason they are not coming into my drawing.
I purged everything and still no luck. When I open a new, blank drawing and try it, it works fine. Not sure what could be preventing this command from working in the drawing I'm trying to get these tables into.
When I go to plot, my plot styles table only shows .stb files. I have a bunch of .ctb files that exist in the plot styles folder, and everything is pathed correctly but the .ctb files do not show up in autocad. How can I get these files to be available?
(They do show up in some drawings for some reason though, just not when I create a new drawing file.)
I've used the attached code to set the number of colu9mns and rows in a table adn it works with all my tests.
However I also receive the warnings:
"Public overridable property NumRows() As Integer is obsolete. Use 'Table.Rows.Count' instead"
and
"Public overridable property NumColumns() As Integer is obsolete. Use 'Table.Columns.Count' instead"
Dim tb As New Table() tb.NumRows = 6 tb.NumColumns = 3
Both the Rows and Column Count property are Read only.
It is possible to create a table for an alignment as shown in the example attached?
View 1 Replies View RelatedI have a drawing with 3 table styles I've saved that I can usually insert into my drawings using design center when I need them. Normally all three come in fine, occasionally only two will come in. I have a drawing that I am trying to insert my table styles into and none of them are inserting! I don't know if there's a setting preventing this command or what.
View 1 Replies View RelatedThe product is AutoCAD 2013 Architecture. It installed fine. Typically, as part of the install routine, I go in to the Plot dialog and set the plot style table to monochrome.ctb.
However, on this particular install... something is different. When I open the screen, typcially the plot style table is set to 'none' and I then set it to monochrome.ctb. That is not the case on this one. It is defaulting to AEC Standard.stb and monochrome is not in the list.
1.jpg
I read elsewhere to run CONVERTPSTYLES at the command line. I tried that and it did work..however it does not hold the setting. If I close and restart CAD, I am right back to the AEC Standard.stb default again.
This seems to just be a problem with new drawings? If I open one from the network, it does have the monochrome.ctb setting already set.
I assumed it must have been a problem with the default in options, but I believe I have it set correctly? See below.
2.JPG
If I interpret the above correctly, the plot style table drop down box should be defaulting to 'none' ? but it does not... it defaults to AEC Standard.stb.
I have already tried a complete uninstall/Reinstall of CAD and still have the same issue.
Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
way to set the default to be 0. When we release a drawing we have it as Rev 0, Released for Fab..
It's a pain having to change it from 1 to 0 for every idw.
Work ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit ~ i7 20gb
Nvidia Quadro FX 1700
Home ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit i7 - 16gb
Nividia GeForce 9800 GT 1GB
240g Kingston HyperX SSD
I have tried:
Table.SetCellType(0, 0, TableCellType.BlockCell)
result:
Warning 1 'Public Overridable Sub SetCellType(row As Integer, col As Integer, type As Autodesk.AutoCAD.DatabaseServices.TableCellType)' is obsolete: 'Use Cell functionality instead.'
Then i tried:
Tbl.Cells(0, 0).CellType(TableCellType.BlockCell)
result:
Error 1 Property access must assign to the property or use its value.
Then I tried:
Table.Cells(0,0).CellType = TableCellType.BlockCell
result:
Error 1 Property 'CellType' is 'ReadOnly'.
Header says it all. For example, if I set a pipestyle to display the inside walls with linetype Continuous, it works ok in plan view, but not profile.
When I select the pipe top edit its style (right click context menu), it is in the Profile View, but the changes are happening in the plan view.
Where I should set it to display how I want in the profile view?
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
We have, as our standard library default dimension style, a 1/32 fractional style, called "1/32-FRACTION". Various Object Types, like Linear Dimension are set to this Object Style. When I create a drawing, then these Object Defaults are in effect.
This means that, doing nothing while executing a dimension command, I get fractional dimensions by default. This works good.
However, sometimes I want to create a drawing where the default dimension style is "X.XXX-DECIMAL" without changing the Object Defaults found in the style library. I've tried to make the changes from within the style library and then save this as a template. However, when I try to make a drawing based on this template, Inventor states that the styles in the template differ from the styles in the library" and then busily goes about undoing what I careful did.
So I'm hoping there is something in the API I can call on to do this with a macro. Is it possible to write a macro that after you start a drawing, flips all the various Object Styles from "1/32-FRACTION" to "X.XXX-DECIMAL"?
I need to produce a better standard table for our company, but need to know how it would be possible to display only either the START STAKE VALUE/ STATION or END STAKE VALUE/STATION in the appropriate column. If I can achieve this i would not need to details for straight segments as indicated in the details column.
View 5 Replies View RelatedI have a rule in the .idw drawing template, that displays a dialog box asking for the size (A, B, C, D...). Once the size is selected, it displays the appropriate border and title block. There is a small & large title block, so an A or B size gets the small, and a C or larger gets the large. This works great.
My question is, how can I have the appropriately sized Revision Table (small or large), automatically ready for use, based on the drawing size? The (2) Revision Tables are defined in the Styles library.
Product Design Suite Ultimate 2014 | Vault Basic 2014 (SP1)
Dell Precision M6600 | Intel i7-2820QM - 16GB
nVIDIA Quadro 4000M | Windows 7/64 Pro
Is there a way to setup vertical alignment of text in a cell for the entire table, when using Table Tool? It is possible for a single cell, but when selecting a table (or multiple cells) this option is not available.
View 5 Replies View RelatedMy old boss started up his own company and I am wanting to create dim styles and text styles for this said company. Right now, we use ones that have been carried over in projects from previous employers, and they are driving me nuts. Even when I worked at said employer, i always thought things could be handle much simpler than what they had in place.
creating Dim styles and Text styles that we can use from here forward. My problem is, I havent created one since school and forgot all about how too
I am using autocad civil 3d 2012 and know they have annotative dimensions and what not, so can these be used to make life simpler?
In other words, can I create one dim style that can be used in different projects/sheets that have different scales?and last but not least, the great old debate, is it easier to create dim styles for annotating in model space or just create one and do all my annotating in paper space?
how to sort (alphabetically, for instance) the Graphic and Text styles in the Graphic and Text Docker? I need the styles "Roads-county", "Roads-State" & "Roads-US" near each other and "apples" listed first.
View 9 Replies View RelatedWhen I want to establish a new annotative text style, and I'm in the Text Styles dialog box, in the "Size" box, why will it not let me enter a Paper Text Height of 3/32"??? Every time I try it defaults to either 1/16" or 1/8". I have checked the Annotative box.
View 2 Replies View RelatedI can't find information for how a block's text is utilized in a style. Here are some details. I have a unitless block with a non annotative text size of 10. This block is part of a style with a size 'use drawing scale' of .12. At 40 scale, it inserts at 4.8 size. If I change the text size to 8 it inserts at 4.8. If I hcange the text size to 5, it inserts at 3.
My question is how are the annotation scale, block text size, and style insert size tied together? OR are there other variables influencing the scaling? I have attached a screen shot of some of my unofficial tests.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I just upgraded from AutoCAD LT 2005 to AutoCAD LT 2012. I commonly used a font that, on the 2005 version, was called a1.shx. It has been replaced, on the 2012 version, with archstyl.shx. When I go to "Manage Text Styles", under the "Font Name" there is a yellow triangle with an exclamation point in it before the font name "archstyl.shx". I am assuming this means that the font is not currently available on my system because it is replaced with the simplex.shx (which I read was the default alternate font under "substitute fonts" in the users guide). There is not a font style on my current system that suffices as a replacement to the font I used on the 2005 version of AutoCAD LT. Is there anyway to import the old font to AutoCAD 2012? Is there a way to put new fonts on my system so that I can find an adequate replacement?
View 6 Replies View RelatedI am doing my general notes
I would like the top text to be larger and a different text style than the next text can this be done
for example a title of times new roman .08
and the rest of the notes to be simplex .06
( know its not simplex but that wasnt an option)
How do I change the text style for one layer only? I already have some text in one font on a layer but now I want to create lables in a different font but when I change the text style while that layer is active both layers change.
View 6 Replies View RelatedI have created some new layer and Text styles.
I would like to set the new Text styles to the new layers, but cannot find a way to do so.
Inventor 2010
My some autocad files were slowed down. For example i wait about 10 seconds when i edit a text.
Afterwards i see too many text styles in format/text styles command. i want to delete text styles but i can't.
it says "style in use, can't be deleted". I dont know where these text styles come from. Other files when they are infected with the virus, such as. Also have $ signs in text style names.
Using ACAD LT 2009. Update 3.
I've tried some of the settings for the mleader text placement. I'm trying to get the text to sit on top of a horizontal line. And an angled leader from the horizontal line to the object I am describing, ending in a dot.
All this is working fine, the lines, dot, etc. It's set for straight, not spline. And max. 2 leader points. All works as I want here.
What isn't working well is the text placement. I am able to have the text be horizontal, this works. But I can't get it to have the text above the horizontal line. I can set the leader connection to underline top line, or underline bottom line, or underline all text. These 3 choices seem sort of retarded. The first two put the text right on the line with no space. Doesn't look good. The third choice puts the text a bit above the line, looks perfect, except that there is now an additional line below the horizontal leader line, and that looks dumb.
Am I missing something? Has this feature matured more in later versions?