I am getting the following message when I open PS:
You currently have Adobe Photoshop's primary Scatch and Window primary paging file on the same volume, which can result in reduced performance. It is recommended that you set Adobe Photoshop's primary Scratch volume to be on a different volume, preferaby on a different drive.
When opening cs4 I get the error message that "Photoshop has closed unexpectedly, click ignore or reopen".
View 14 Replies View RelatedI've been running Photoshop CS2 since it came out and never had any real problems. Then the other night I loaded approx 20 custom shape files that had about 10 shapes each from ActionFx. I played with them for a while and everything was working fine. Then I shut my computer down that night. The next morning I tried to open Photoshop and got the following message "could not complete your request because there is not enough memory (RAM). I've tried everything I can think of to fix this so I'm pretty desperate for help.
Finally, I resorted to uninstalling just the Photoshop component of CS2. Then I defragged and reinstalled. When that didn't work I uninstalled all of CS2 including my preferences. Defragged again and then reinstalled. All of the other components open and work (Illustrator, GoLive, InDesign, etc.) but Photoshop is still a no go  Something I found really strange is that while the error message is up on the screen I can still see all my layer styles and actions (even though I've uninstalled everything twice now).
Of course, as soon as I click ok on the error message everything closes and Windows says "Adobe Photoshop CS2 has stopped working. A problem caused the program to stop working correctly. Windows will close the problem and notify you if a solution is available." Needless to say no solution is ever offered.
I downloaded the Photoshop CS6 trial verion yesterday and it worked great for afew hours, but I closed it and now every time I try and open it there's an error message "Adobe Photoshop CS6 hs encountered a problem and needs to close" what could have cause this and how do I fix it? I have windows XP and everything is up to date
View 1 Replies View RelatedCS5 has suddenly fallen over with the following error message when trying to open a raw file (.CR2 / 5DII), which it could open previously:
"Could not complete request because of a problem with the file-format module interface".
I just installed Photoshop CS4, both the 32 and 64 bit versions (part of the "Master Collection"). After opening the programs I changed the scratch disk location to two separate drives other than where Photoshop resides, where it had placed said file as a default. Now neither Photoshop versions will open.
I get the following message:
"Could not open a scratch file because the scratch file is locked..."
Just one problem, there is no scratch file visible on either of the two drives...
My operating system is Vista Ultimate on a 64 bit Quad CPU machine with 8Gb of ram, two Raptor HDs, four 750Gb HDs configured into one RAID 5 drive and Nvida GEForce 8800GTS graphics card.
can not open file, message says "program error"
View 3 Replies View Relatedwhy does message say application components are missing when trying to open Photoshop?
View 1 Replies View Relatedelements 9 is shwing an error message and will not open
View 8 Replies View RelatedMy Photoshop Elements 12 editor won't open. I have had elements for 2 weeks and it was worked just fine, but now it won't open even though my organizer works just fine. It pops up with an error message. I have tried the ctrl+alt+shift and that doesn't work either. I have updated all that needs updating.
View 3 Replies View RelatedI have just installed CS5, and all components work except for Photoshop, which will not open. I am on a new Macbook Air running Mountain Lion 10.8.5 with 1.3 GHz Intel Core i5. The error message reads: "You can't open the application "Adobe Photoshop CS5.1" because PowerPC applications are no longer supported." I have already tried reinstalling and deleting the library file: com.apple.LaunchServices.plist and restarting. What can I do?
View 1 Replies View RelatedI just downloaded Illustrator CC few days I go and everythime I try to open it I'm getting an error message: "Adobe Illustrator had detected some problems associated with the registration that have to be solved in order for Illustrator to work correctly. To solve it click with the roght botton of you mouse on Illustrator.exe and select adminitrator...
I don't know how to do it. Where is located Illustrator.exe in my computer?
I have few hundred drawings ( used as symbols) I have to update; the issue I have is that many of them are dynamic blocks. When I process them, the program stops when opening one of those drawings having authoring elements. Is there any way to go over that message instead of clicking "No" every time?
View 4 Replies View RelatedWhen I try to open my Xara Photo and Graphic Designer 6 software, I get a Microsoft Visual C++ Runtime Error due to "abnormal program termination"
I don't recall the program shutting down abnormally. Do I need to reload the software?
When I double click an AI file to open it, I get this message: "Can't open the illustration. There is not enough room for the window, increase document area and try again". This error started happening about a week or two ago. Although it is inconvenient to have to go to File>Open and then locate the file to open it since I am used to doing it the other way at least it is a way to open the AI file. I just discoved that if I double click a graphic in a Adobe Acrobat Pro using the Edit Object I get the same error message. This is a problem.I have checked previous discussions about this and tried things like unchecking the "open as tab" option in the preferences but that does not work.
Creative Suite CS6
WindowsXP
My goal is to have a message box open as soon as an assembly file is opened so that other users will be warned/ notified of linked parameters. My assumption is that an iLogic rule would be the best way to handle this.
I can create the message box, but when I looked through the iLogic snippets I didn't find any way to trigger the box at opening the file.
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
I'm having an issue with my 2013LT. Everytime I open a new drawing I get a dialog box that says "One or more SHX files are missing. What do you want to do?" The options they give me are "Specify a replacement for each SHX file" or "Ignore and continue".
View 2 Replies View RelatedI downloaded the LR4 upgrade. LR4 Image shows up on my desktop, dmg icon and READMe shows up, when I double click on dmg, I get message saying unable to open. Using Mac Pro and upgrading from LR3.
View 7 Replies View RelatedI've downloaded Lightroom 4 but I get an application error message (0xc000007b).
View 4 Replies View RelatedI completed a video and when I went to 'Create a Video File' I would receive the following error message...
"Failed to open MPEG encoder"
I'm using Ulead VideoStudio 11+. The 'vsp' file is too long...One hour fourteen minutes. I made a 'Part 1' and cut the vsp to forty-five minutes and still received the same error message.
I cut the 'vsp' to one minute thirty seconds and it would "Create a Video File'. I've never had this problem before.
It seems with Ulead VideoStudio 11+ whenever I have a problem like this I can resolve it, by backing up all the files, then removing the program, thoroughly clean the hard drive and re-install 11+.
when i try to open my 2011 inventor program which ive been running for months now i get an error message. and the program refuses to open. "Error in Inventor Undo Folder: Please Make Correction" any ways to fix this so i can get back to work. and i should add that i am not a computer genius im a furniture designer.
View 9 Replies View RelatedI very frequently get the above message, "Oject was open for Read". Its to do with annotative text objects which I just recently started using. When I get the message the piece of text I am trying to make changes to is frozen, cant delet it or anything?
View 9 Replies View Relatedwhen I invoke the Revcloud command and type "O" for options, I get a message box that says "Unable to open dialog box", if I close that message box I'm able to draw cloud lines in my drawing but I have no control of the cloud since I can not access the options dialog box.
My Revcloud was working fine last week.
why I'm getting the "Unable to open dialog box" message?
why my Lightroom 4 program will not open? Yesterday it worked fine. Today I get a message that "an unexpected error occurred". If I try to repair the Lightroom 4 program in the control panel, I get the message "the feature you are trying to use is on a network resource that is unavailable". SO much of my work is sitting in those catalogs.
View 1 Replies View RelatedI opened a drawing this morning that was sent to me by another office. I tried to open the layer property manager and it gave me a message that there were more layer filters than layers and that I should delete some of the filters. I said ok, but the property manager dialog box never opened. Now I can't open the layer property manager dialog box in any of my drawings.
View 7 Replies View Relatedin CS6 illustrator when we open file we get message " font Missing" but fonts are loaded.
View 3 Replies View RelatedI'm using Lion, and to install the Leopard version of GIMP. I'm getting an error message, and don't know what action to take:
Unable to open a test swap file.
To avoid data loss, please check the location and permissions of the swap directory defined in your Preferences (currently "/Users/myname/Library/Application Support/Gimp").
If I go full screen with an image and come back to windowed view the top menu bar that contains the hand, view,rotate, arrange documents and screen mode items is lost and replaced with that part of the full screen image that was in that location. There is no way of recovering the menu bar, which is still invisibly active, unless CS4 is restarted.
Otherwise CS4 is not working too bad except for the trailing images following window movements, jerky rotate and the fact that Topaz adjust throws out of memory messages unless Photoshop memory is reduced to 700Mb.
WinXPproSP3
4Gb RAM
seperate scratch disk
Cache at 8 levels
Wacom Intuos 3 with latest driver
nVidia 8600GT with latest drivers
I've been adding English text to an Italian comic. This involves whiting out the original text and then inserting new (translated) text.
I keep encountering the same problem every time I alter a few pages. Namely, the font changes slightly. It does this without my making any changes to the character settings whatsoever. The only way I can correct the problem is to close the program and reopen it. Or, if that fails, which it often does, restart my pc. My OS is Windows XP Pro, by the way.
To illustrate what's happening, I've posted two comic pages. The first shows the font as it should be, the second as it shouldn't. Note the difference in the letter I.
Does anybody know how to stop this occurring?
I've been playing around with PS for over 18 months and I've never had this happen. My cursor changed to cross hairs and will not change back. Even when I pick a brush that should be round like the Clone Stamp Tool, Eraser, Healing brush etc. I thought maybe my Preferences got corrupted and checked there but nada.
View 3 Replies View RelatedIf I change my workspace a sign comes up asking if I want to save changes in shortcut file.
If I say no, I seem to lose all the new shortcuts from last few months.