I opened a drawing this morning that was sent to me by another office. I tried to open the layer property manager and it gave me a message that there were more layer filters than layers and that I should delete some of the filters. I said ok, but the property manager dialog box never opened. Now I can't open the layer property manager dialog box in any of my drawings.
View 7 RepliesRe: AutoCAD LT version F.51.0.0
If a color is selected from either the properties or quick properties dialog boxes, one of the choices the color icon with both black and white and a diagonal separator (which produces white on the screen and black on the plotter) which I will consider the default.
On the Layer Property Managers dialog box, however, while the full color pallet is available, I cannot find a way of setting the layer color to the default. Once a layer color has been changed from the default, how does one put it back to the default color?
you can match the layer filters with in the layer manager to the drop down on the ribbon..so how do i get the to match so the filter im viewing in the manager is what i see in the ribbon.
View 1 Replies View RelatedWhat is the layer "Status" in the layer property manager? It doesn't correlate with the On/Off or Freeze/Thaw . The icon appears to be a sheet of paper but some are blue and others are gray. I cant tell what makes them change colors from blue to gray.
View 4 Replies View RelatedI'm trying to set up a layer filter that excludes Existing layer names, Following NCS standard, Existing information layer names always end with a -E
Help file says:
~ (tilde)
Matches anything but the pattern; for example; ~*AB*matches all strings that don't contain AB
but using ~*-E (tilde asterix hyphen E) returns all the layer names that end with a "-E"
does the tilde not function with LayerProperty Filters?
Trying on Map3d 2011
I need importing and exporting custom layer property filters. Long story short, we XREF a lot of mechanical equipment in our models and when we create a structural drawing make all of the mechanical item print in a light ghosted color. I created a layer property filter with a huge list of all the possible equipment prefix's like *cl-* *tk-* *rv-* and so on to filter out all the equipment layers. It took a long time to create, so I want to export it and import it into future drawing.
View 1 Replies View RelatedI have a drawing where I need to open the layer manager to turn on a layer in a view port but cannot get to that particular column. As you look across the top of the layer manager I can see all the headings of each column beginning with "Name", "Status", "On" and so forth. The last column heading I see is "Description" but I need to go even further to the right to get to the column I need to be at but can't get there. There is no scroll button on the bottom of the layer manager which would allow me to do that.
View 7 Replies View RelatedI'd like to delete a layer but the layer cannot be deleted from the object manager as the delete menu item is disabled for that layer.
View 1 Replies View Relatedwhat happened but the layer properties manager box does not open any more?
View 9 Replies View RelatedWith the code below, I can delete off-page objects...as long as they are assigned the Desktop layer. If there is no object on that layer, I want a warning box to pop up stating so. How can I do this? I imagine that I'll need If then statement something like 'If .....objects on layer Desktop <0 then pop up warning message box, end if.
Private Sub CommandButton4_Click() ActiveDocument.BeginCommandGroupActiveDocument.MasterPage.DesktopLayer.Shapes.All.Delete ActiveDocument.EndCommandGroupEnd Sub
When I try to add new layers the layer propert manager is notvisable. I have to hit escape to return to the drawing. I beliesve the dialog box may be trying to go to a second screen I use at home. This happens on my lap top when it is not connected to my second moniter..
View 6 Replies View RelatedIt appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies View RelatedI'm getting lots of error messages when I bring up drawings in my 2009LT. Resource Manager Error. Cannot load resource only DLL. File not found, then many similar messages with AecResMgrenu.dLL.
Over and over, keep hitting OK till drawing loads. Not one specific file either.
Also: Unable to locate resource string. Resource Manager is not correctly installed.
Is there a way to fix without reloading 2009LT and having to reset all settings. Can that file AecResMgrenu be replaced. I have backup Program Files on CD.
A drawing with hundreds of layers should be simplified for our customer by decreasing the numbers of and renaming the layers (there is yet no target file existing). In order to solve this, I generated group filters and assigned every single layer to them (all printing properties are assigned to objects). The layer groups show the desired layer structure after the transformation (still a three-digit number).
Unfortunately, the LAYTRANS dialog doesn't let me choose layers by group filters or remarks. It seems as all the work was for the birds.
Is there any way to translate my layers using filters or remarks?
I use AutoCAD Civil 3D 2010.
I'm having issues with Civ3d 2013. I pushed off upgrading from 2012 because of the format change and the service pack release. I was hoping little glitches would be fixed.
Here are the a couple of glitches to date that I have seen no resolution to in the long list of threads.
1. Layer filters do not filter, unless I have checked "Apply filter to toolbar". The problem is, I dont want to apply them to the toolbar.
2. Publishing to PDF - when set to lines merge (set in the page layout and the publish setting), the wipeouts dont work, and the background masks on leaders makes a faint border around the text in the PDF. When set to overwrite, to get the wipeouts to not print to the PDF as a big black blob, they have to be on a layer set to color 255. I can work around most of the wipeouts, except for dimensions because the background mask doesn't seem to take.
I have a client experiencing a layer manager dialog box issue - the layer names are disappearing... This is not happening all the time - and in different files.
I have attached an image below.
How do I get my Sheet Set Manager to open up each time I open a CAD drawing? I turned it off and can't remember how to turn it back on. I use command SSautoopen, set to 1 but doesn't alway work. Sometimes if I close AutoCad and reopen it I can got to drop down menu and click on .dst extension and it will open but if I close out of it it won't open again unless I restart AutoCAD. I thought I used a command from the Express Tool menu but can't find it.
View 3 Replies View RelatedHow to get the classic layour manger to use the ACA layer manager tools?
In 2008 before the floating layer manager the manager looked as the Classic version does now in AutoCAD ACA 2012 with the tool of "new layer from standard". This tool now only seems to be in the floating layer manager and when I switch to Classic manager the "new layer from standard" is removed from the dialog box.
I want to use the classic dialog but have access to the "new layer from standard" tool
Im working on a reticulation drawing with the site plan XREF'ed in. Why XREF manager has dozens of unreferenced attachments which I cannot delete. See image.
I was working on the drawing this morning and reloaded the XREF without trouble, then I saved the retic drawing as a Rev 3 and now I cannot reload the XREF. Then when Id like to remove and reattach it I cannot find it in XREF manager yet it is still visible on my drawing.
I'm currently using AutoCAD LT 2012 and when I create a new layer and set it as current in the layer manager, regardless of what color I set the new layer to, the new layer's color remains the same as the previous one in the properties box even though the colors of the layers are always set to "by layer."
View 3 Replies View RelatedWe have the Cardinal Toolbar and the Layer Properties Toolbar (one that allows you to toggle between layer groups ... for example floor levels) installed on our AutoCAD LT 2006 software for a PC. We are looking to purchase AutoCAD LT 2013 for a MAC. We have downloaded the trial version, and cannot find these toolbars on the new version. Our files are set-up to function with these toolbars. Is there any way to download these toolbars for the new version? If not, are there commands we can use to change the cardinal direction in model space and to toggle between floor level layers (groups?)?
View 1 Replies View RelatedI'm attempting to create a layer property filter so that all used layers except xref ones show up. I can use the Invert filter option, but that doesn't stay checked between sessions for some reason. How can I set up this property filter?
View 2 Replies View RelatedI'm an ACAD LT 2008 user demo'ing ACAD LT 2012.
In ACAD LT 2008 you can create a new layer (or layers) from a layer property filter and can edit all of the new property characteristics and the filters will not sort until you are done (apply). This is useful for creating multiple layers (especially matching your current filter) that you can copy and paste layer names. However, in ACAD LT 2012, as soon as you select "New Layer", a new layer named "Layer 1" automatically sorts/filters and it is gone from view, requiring you to find it before you can rename it and edit its properties. Is there a way around this?
I have Auto Cad 2010 Lt, i cant used keyboard fore select or to delete selected object by pressing delete buttion on keyboard, also i cant change the layer or any property from the panel , for that i have to open a property window and change it
for that i have dock a property tool on my right side of the windows
How to change the setting so i can work faster.
I have set layer settings to a PLINE in model space. The layer is unfrozen and turned on but i cannot see the properties associated with the line, it juist remains white. for example i want the pline to be magenta and global width to = 2. After i set those properties the line will show thickness of 2 but not magenta unless i move the line a little from its position then it turns magenta. However if i do anything else to the line then it turns back to white.
View 2 Replies View RelatedHow to get the layer filters that are built in to work in the layer manager without pushing the setting into the toolbar? I had the same problem with LT 2013 on my old 32 bit machine. Others in the office running 64 bit did not have this problem with 2013. Running Windows 7 professional 64-bit.
View 7 Replies View RelatedEveryone at the office where I work is having the same problem with AutoCAD 2014:
1. When creating a new layer state, and selecting all layers and clicking "remove from layer state" and then "okay", upon going back into the layer state, about 80% of the layers have returned and you have to select all and delete again and hit okay, and then go back in and do it again, about 7 or 8 times total before the layer state is cleared out and ready for you to add back just the desired layers. Even if you don't create a blank slate layer state to begin with, whatever layers you delete, once you hit okay and go back into the layer state, most of the ones you just deleted are back.
2. Even more of a problem is that sometimes all the already created layer states will suddenly reassimilate ALL layers in the drawing, and the above process has to be done to all existing layer states.
This takes an enormous amount of time to correct for multiple layer states, which we typically have in a drawing.
While I have layer filter on using dialog, I want to add a new layer to this filter.Normally you right click and add layer similar to the highlight layer, however, you if layer filter are on, then layer 1 is created.
Then you have to find this layer, and rename it. I also can use the command prompt to created the layer, However, I want to create a layer name similar to the one in the filter, as if I index the layer. Example:C-topo-spot-existing-phase -1 New layer: C-topo-spot-existing-phase-2.
Why can you no longer delete layers with the delete key?
View 4 Replies View RelatedIs there a way to control which of two 'Graphic Property definitions' are used via a formula property with a IF, Then, condition statement?
View 3 Replies View RelatedIs it possible to freeze or switch off a layer so that objects on that layer can be moved or rotated etc with the rest of the drawing?
View 7 Replies View Related