How to get the layer filters that are built in to work in the layer manager without pushing the setting into the toolbar? I had the same problem with LT 2013 on my old 32 bit machine. Others in the office running 64 bit did not have this problem with 2013. Running Windows 7 professional 64-bit.
View 7 Replies
It appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies View RelatedA drawing with hundreds of layers should be simplified for our customer by decreasing the numbers of and renaming the layers (there is yet no target file existing). In order to solve this, I generated group filters and assigned every single layer to them (all printing properties are assigned to objects). The layer groups show the desired layer structure after the transformation (still a three-digit number).
Unfortunately, the LAYTRANS dialog doesn't let me choose layers by group filters or remarks. It seems as all the work was for the birds.
Is there any way to translate my layers using filters or remarks?
I use AutoCAD Civil 3D 2010.
you can match the layer filters with in the layer manager to the drop down on the ribbon..so how do i get the to match so the filter im viewing in the manager is what i see in the ribbon.
View 1 Replies View RelatedI'm having issues with Civ3d 2013. I pushed off upgrading from 2012 because of the format change and the service pack release. I was hoping little glitches would be fixed.
Here are the a couple of glitches to date that I have seen no resolution to in the long list of threads.
1. Layer filters do not filter, unless I have checked "Apply filter to toolbar". The problem is, I dont want to apply them to the toolbar.
2. Publishing to PDF - when set to lines merge (set in the page layout and the publish setting), the wipeouts dont work, and the background masks on leaders makes a faint border around the text in the PDF. When set to overwrite, to get the wipeouts to not print to the PDF as a big black blob, they have to be on a layer set to color 255. I can work around most of the wipeouts, except for dimensions because the background mask doesn't seem to take.
While I have layer filter on using dialog, I want to add a new layer to this filter.Normally you right click and add layer similar to the highlight layer, however, you if layer filter are on, then layer 1 is created.
Then you have to find this layer, and rename it. I also can use the command prompt to created the layer, However, I want to create a layer name similar to the one in the filter, as if I index the layer. Example:C-topo-spot-existing-phase -1 New layer: C-topo-spot-existing-phase-2.
Does Autodesk have the option to have a drop down for the layer filters, similar to the chose layer dropdown?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I'm trying to import layer group filters from dwg to dwg. I know that this feature removed with Autocad 2005. I know i can import layer states, but layer states doesn't solve my problem. I tried "lfilterio" but it's not working.
how to make it, with or without a lisp routine. Or may be write one?
My company uses tons of Xrefs - wonderful, however problem comes when having to navigate through 100's of layers to get to the main drawings layers. So I tried using the layer filters to just show my main drawings layers. Here is the problem, I you can select show all layers, not good, can select just the xrefs (show all of them or show just one of them, etc...), or you can show just the used layers - I tried that, but when you create a new layer it is not included in that filter. I tried setting up a custom layer filter, however, I don't know how to right the name or what selection to make that would allow me to exclude a set of layers.
View 9 Replies View RelatedI am trying to remove all unprotected layer filters from a DWG and getting the following result:
Command: CLEANLF
Deleting layerfilter[0]: 'Test1'...
Autodesk.AutoCAD.Runtime.Exception: eInvalidInput
at Autodesk.AutoCAD.LayerManager.LayerFilterCollection.Remove(LayerFilter value)
[Code]...
Here is the code that produced this output. Why the Remove throws this exception?
<CommandMethod("cleanLF")> _
Public Sub cleanLF_Method()
Dim ed As Editor = MgdAcApplication.DocumentManager.MdiActiveDocument.Editor
Dim db As Database = HostApplicationServices.WorkingDatabase
[Code]...
ps I am running AutoCAD 2013 SP1.1 PV: G.114.0
Notice that the import / export Layer filters is missing in 2009?
View 9 Replies View RelatedIs there a way to set up a layer filter to strip off the xref name?
I have standard layers in all my drawings. I want to use a filter to setup the type of drawing.. i.e erosion control.
However, from project to project the xref file name changes so filters don't work with the new name...
Anyway, if there is a way to hide the xref filename from the prefix of the layer.. if so, a standard layer filter would grab all the layers with the same name.
Civil 3D 2012 SP2
Win 7, 64 bit
I was trying to use layer states and layer filters, the way when I use the layer state 1, for example, it will only be shown in my layer panel the layers on/unfrozen for this layer state. I checked the layer management panel and removed the layers I didnt want to be shown from this layer state 1 and hit ok/close, but they're still being showed. So i created a filter, turned it on and saved my layer state with this filter ON, and nothing was changed.
View 1 Replies View RelatedMy layer filters are not working on the ribbon, why and/or if this is an autocad bug.
I created one for hiding Xref layers, which is an inverted filter. it works on the "Layer Properties Manager" but does not work on my ribbon layer menu. If i turn on the old layer dialog it is working in there.
I know there are many differnt views about the ribbon so i dont need any of the comments telling me to turn it off and get on with it etc.
If you look at the attached images you can see the screen shots of my problem. Note that i have the layer settings correct. Autocad Help says that if the "apply filter to layer toolbar" is on then it will apply this to the ribbon. which it does not.
I am using 2013 C3D with SP1. After I publish sheets using the sheet set manager my layer filters stop working (will not filter layers, it will just display the last layer filter used prior to running the sheet set manager).
View 3 Replies View RelatedIs this functionality still available. I have seen several threads that mention it being available on some people layer manager, but I don't have it on either. See attachment. I remember there being a registry key you could add or change to the tools, but when I did that I always got two errors in drawings that would appear every audit.
View 6 Replies View RelatedThis problem just started when I upgraded to 2014. When I try to set up layer filters the Layer filters properties dialog box does not show. I'm guessing the function is working its is just that the dialog box is poping up somewhere out of view of the monitors, forgot to mention it is a 2 monitor set up.
View 2 Replies View RelatedI'm trying to set up a layer filter that excludes Existing layer names, Following NCS standard, Existing information layer names always end with a -E
Help file says:
~ (tilde)
Matches anything but the pattern; for example; ~*AB*matches all strings that don't contain AB
but using ~*-E (tilde asterix hyphen E) returns all the layer names that end with a "-E"
does the tilde not function with LayerProperty Filters?
Trying on Map3d 2011
We have one template that we use for starting all our drawings. This contains all of our layers, layer filters and most commonly used blocks.
Then we have a template file called "Titleblocks" -- this contains one layout for each different size border as well as vport definitions for Plan, Profile or P&P.
When I used the C3D P&P tool to create my sheets, it of course used the Titleblocks template which means that the filters are lost. Is there a relatively simple way to add those filters to my sheets? Each sheet is a layout in a separate dwg file.
We have a number of standard layer group filters. We also have a utility that allows us to re-create our standard layers with the push of a button, making it easy to use the PURGE command to keep the drawings clean.
We have noticed that once we purge our layers out, the group filters are broken. After reinserting the standard layers, some of them show no layers, and others show all of the layers, neither of which is correct. It seems that once a Group Layer Filter no longer sees the layers it was set to include in the layer list, it forgets all its settings and becomes useless.
How can we continue to use PURGE without losing the functionality of our layer filters?
I opened a drawing this morning that was sent to me by another office. I tried to open the layer property manager and it gave me a message that there were more layer filters than layers and that I should delete some of the filters. I said ok, but the property manager dialog box never opened. Now I can't open the layer property manager dialog box in any of my drawings.
View 7 Replies View RelatedI need importing and exporting custom layer property filters. Long story short, we XREF a lot of mechanical equipment in our models and when we create a structural drawing make all of the mechanical item print in a light ghosted color. I created a layer property filter with a huge list of all the possible equipment prefix's like *cl-* *tk-* *rv-* and so on to filter out all the equipment layers. It took a long time to create, so I want to export it and import it into future drawing.
View 1 Replies View Relatedwhat is the difference between filters and layer styles?
Obviously they have different sets of effects, but what makes an effect one or the other?
PS5 Vista. After a layer is converted for smart filters, the whole image still must be made 8 bit to apply a smart filter only to the converted layer, which defeats the purpose of the layer conversion and the utility of smart filters. I would like the rest of the image to remain 16 bit.
View 11 Replies View RelatedIs it just my imagination, or is there no longer a way to create layer masks for individual smart filters in Photoshop CC.
View 4 Replies View RelatedI downloaded and installed GIMP 2.8.8 in Windows XP. The Filters menu option shows only Repeat last, Re-show last and Reset all filters.Nothing else in there. Where are the filters?
View 1 Replies View RelatedI have hardly ever used filters for any of my work as I have preferred using Xara's native tools and effects to get what I wanted. But recently, I was inspired by some animation work which used backgrounds painted in Photoshop. They used a lot of textures which enhanced the look of the animation and so I thought I'd try to simulate it within Xara.
It works very well and I can export it as a PSD retaining the layers and Alpha channel. But here come my questions.
1. How can I remove the two Alien Skin demo plugins as I already have the full versions.
2. Why don't the native Photoshop plugins--Artistic, Sketch, etc.--seem to work?
In CS3 you could change something to make all filters act like smart filters, even though they won't. I found this worked very well, now I have CS4 and would like to do the same but can't remember what to do to make it work.
View 6 Replies View RelatedI just downloaded a bunch of filters and I dragged them into the filters directory under plugins, but when I open photoshop, none of the filters are there.
View 4 Replies View RelatedI am working on a dormitory project and need to provide a required light and ventilation schedule. I have figured out how to create a schedule for each level, but I want to isolate only the Dormitories and the Kitchenette (weed out all the other rooms such as corridor, elevator, storage, toilets, showers, stairs, trash, electrical, etc.).
I tried using seclusion filters, but there are too many items to exclude and cannot fit them all into the 4 filter categories. I am trying to just get the rooms that begin with 'D' and 'K'. I tried providing the variable 'Begins With' for D and in the next line 'Begins With' K, but then nothing shows up.
Is there a way to provide information to the filter that would allow it to show only rooms beginning with D AND K? I cannot seem to get it to work. I have been playing around with separation values within one filter category (i.e. 'Begins With' D, K) but apparently you cannot add multiple variables within one of the filter items.
Can I move smart layer mask to the smart filters on the same layer as a mask?
View 1 Replies View Related
