Photoshop :: Scale Tool In CS6
Oct 9, 2013Where i can find the scale tool in photoshop cs6... I am new in what menu it was but i don't use it that much..
View 3 Replies
ADVERTISEMENT
Photoshop :: PS 7.0 No Transform > Scale Tool
May 19, 2009I am currently in the following section Photoshopgurus Photoshop Tutorials - Classy Glass Buttons Tutorial (part 1/2)
trying to make CLASSY GLASS BUTTONS. I am stuck at STEP 7 because I can't find the menu/tool "Transform>Scale tool". I have PS 7.0 on my PC.
Photoshop Elements :: Scale Sidebars And Tool Icons 12?
Feb 24, 2014I´m using PSE 12. Is it possible to scale the sidebars and the tool icons? These are much too large compared to my workspace.
View 2 Replies View RelatedGIMP :: Scale Tool Not Working
Mar 30, 2012After pasting in a PNG, and it's made into a Floating Selection layer, she wanted to scale it down using the Scale tool. So she clicked and dragged till she got the right size, but upon clicking on Scale (in the little dialog that pops up with the Scale tool), the dialog box vanishe ... and the layer went back to its original size. She tried multiple times and got the same problem.
I even got her to click on "Cancel" rather than Scale in case it was a traslation error, like the translator mixed up the Scale and Cancel buttons, but nope.
Illustrator :: Scale Tool Is Not Working?
Mar 15, 2014Scale tool in my illustrator is not worrking.
View 9 Replies View RelatedMaya Modeling :: Why Does Scale Tool Not Working Right
Feb 14, 2012When I try and scale anything, I hit the hotkey R and the 3 manipulators appear. No matter what I click on, X,Y,Z,or center, when I move my mouse I get an "automatic" jump increasing the size. I can't seem to get it to do anything but these staged jumps in size. I cannot scale anything down, unless I use the universal manipulator tool. So, for example, if I want to scale a size 2 sphere to a size .8, I would have to use the universal manipulator and Shift-click on one of the matrix corners and that will allow a uniform scaling. I realize that I can always enter the scaling amount in the Channel or Attribute box field, but it may be that I'm trying to visually scale something and entering numbers isn't exactly the best way.
View 1 Replies View Related3ds Max :: Move And Scale Tool Not Working Properly?
Jun 1, 2012the move and scale tools have decided to stop working. Although I can still move things around, I can't move them up and down, not to mention that the tools themselves don't show up.
View 2 Replies View RelatedGIMP :: Scale Tool Not Working Correctly?
Mar 18, 2011Recently when I click on an image/layer to rescale (like I have done hundreds of times) the height figure resets to 1 px. When I try to increase it back to the original figure, nothing happens apart from weird lines that appear below the image. It started yesterday, after I was in the middle of a project and Gimp crashed (which it has never done before). It does not matter how many new projects I start, after a while the scale tool stops working.
View 7 Replies View RelatedMaya :: Paint Skin Weights Tool Scale Value?
Jun 16, 2011I'm still using Maya 2009 because I really hated what they did to 2010 and 2011. Features that I use often were removed. Multilister being one of them. Now I feel like I'm falling behind too much so thinking of upgrading to 2012 but I ran into a few issues while trying out the trial version.
Paint skin weights tool in 2009, I had the ability to set scale value above 1. Flood smooth couple times and flood scale 1.1 couple times and skinning was pretty much done. It was very quick way to dial in skinning and very effective. Now in 2012, I can't set scale value above 1.000. Has this been moved somewhere else or has it just been taken out? Why is Autodesk keep taking out useful features?
GIMP :: Scale Tool - Keep Aspect Make Default?
Sep 12, 2013is it possible to make the 'keep aspect' option in the scale tool checked by default? it is unchecked every time Gimp starts up and I tend to make the mistake and oddly scale a floating layer because the aspect isn't staying the same. is there any way to make the 'keep aspect' option on by default so when I start up Gimp I don't have to constantly scale it wrong or having to always need to lock the proportions?
View 6 Replies View RelatedIllustrator :: CS5 Distorts Vector On Resize Using Scale Tool
Apr 18, 2013When resizing a vector group in Illustrator CS5 with a custom made symbol in the group I get distortion of the proportion of the shape.
Tried resizing with selection tool holding down shift or option
Turning off align to pixel grid in the transform panel
Turning off align to pixel grid in the symbol option
Checking Enabled Guides for 9-slice scaling is turned on
Checking Scale Stroke & Effects is turned off in preferences
GIMP :: Scale Tool From Toolbox Behaves Differently From Image?
Aug 24, 2013The Scale tool from the toolbox behaves differently from Image>Scale Image. What's the difference? Are there circumstances when I want one and not the other? I'm using 2.8.6, Windows 7.
View 2 Replies View RelatedAutoCAD 2013 :: Insert And Scale Dynamic Block From Tool Palette
Apr 25, 2013I am currently using Autocad 2014 and I am attempting to insert a dynamic block from a tool palette. I would like to click on a dynamic block in the tool palette and have it prompt for the (uniform) scale. It seems simple enough but either all the dynamic properties are lost or it is inserted at 1"x1" (the scale of my original block). How to get this to work?
View 3 Replies View RelatedAutoCAD Architecture :: Annotation Without Annotative - Scale Text From Tool Palette
Apr 5, 2012Unfortunately, a new project we have does not allow us to use annotative objects, so we are back to switching scale by creating several dimstyles with a varying dimscale (eg. Dim96, for 1/8", Dim48 for 1/4" etc.) Now I have created a button on the tool palette that brings in text and it allows me to set the size of the arrow by matching it to the dimstyle, but the text comes in always at the same size - 9" which is 3/32" for a 1/8" plan. The arrow changes but the text does not. I know I have to change the CANNOSCALE, but I can't seem to figure out a way of making it work so that the user will only need to switch the dimstyle from the pull down up at the top right and then be able to use a tool palette button that will bring in a text with leader with it's arrow head and text height matching the dimstyle scale.
View 4 Replies View RelatedMaya Modeling :: How To Change Size Of Move / Scale Tool Arrows
Jun 10, 2011I know there is a way to change the size of the arrows, I already did it and made them bigger and I forget how to make them small again...
View 1 Replies View RelatedCorel PHOTO-PAINT X6 :: Object Tool Size Field On Property Bar Tooltip Says Scale
Sep 11, 2012There is a UI bug in PP X6 where the fields for size on the property bar when using the object picker tool show a tooltip "Scale". See screencap
View 1 Replies View RelatedPhotoshop :: Changing A 'scale' Of Colors To A Scale Of Transparency?
Sep 16, 2005is it possible to create a gradient brush with the colors fading from black to white, and then edit the colors so instead of black fading into white, it's now black fading into transparent?
(so the pixels that were pure yellow are now completely transparent, the pixels that were slightly darker yellow are now almost completely transparent, the pixels that were dark yellow are now barely transparent, and the black pixels remain completely black.)
(I was only able to do it now because I started off with that black/transparent image)
I want to do this so I can change the color of the yellow.. I could use replace color,
What I'm basically trying to do is be able to change stuff in images/screenshots, like add a pattern to a white shirt (so, get rid of all of the white), but completely preserve the darkness of its wrinkles/shadows etc. A friend told me I should just desaturate it, then make it like 50% transparent, then duplicate it so there's 2 of those layers.. and add the new pattern behind it. But it doesn't look that good..
AutoCAD 2013 :: Scale Command Message - Extremely Small Scale Factor Ignored
Apr 13, 2012I have just updated to Autocad 2013. While working on existing drawings (previously created in V2012), I am having issues with the SCALE command. Most times, but not always, when I add a line or block, with a base point on an existing line or object and try to scale it, I get an "extremely small scale factor ignored" message, although I did not get a chance to enter a scale factor. While it appears most times, but not always, if I draw a new line in empty space on that same drawing, I am able to use the SCALE command without problems. I also have the same issue when trying to scale an existing line or block, most times but not always.
Here is a copy of the command line while I am trying to make it work:
Command: l
LINE
Specify first point:
Specify next point or [Undo]: 100
Specify next point or [Undo]:
Command: sc
SCALE
Select objects: 1 found
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
Command:
SCALE
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
If you notice, it does not give me the chance to enter a scale factor. As soon as I pick the base point, it skips over to the error message, yet displays the scale factor prompt with a blank factor. I'm experiencing this issue on various files (not all but most), so I don't think it is a corrupt file. Why I get this and if I can correct it?
Revit :: How To Assign Desired Scale Of Plan On One Sheet Without Affecting The Scale On Other Sheets
Sep 2, 2012I have a floor plan with a very long footprint in a "View" drawn at a convenient scale.
The long building had to be broken to be put on several different "Sheets", and each of the floor plans on each of the sheet has a scale.
When I change the scale of the partial plan on one "Sheet", all the other sheets also change to the same scale and also the original view changes to the new scale.
Is there a way to assign the desired scale of the plan on one sheet without affecting the scale on the other sheets and on the original drawing view?
AutoCAD Civil 3D :: Label Styles Annotation Scale Versus Viewport Scale?
Jun 26, 2009am in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
AutoCAD 2010 :: Scale On Printed PDF File Not Matching The Plotted Scale?
Jun 27, 2012We have recently noticed that after printing a PDF of a drawing I plotted from AutoCAD we are coming up with differences when we double check the scale on the printed hardcopy using a carpenter ruler.
For example, there is a dimension labeled on the drawing of 200 ft. However, if I try to scale this out with a carpenter's ruler at the drawing was set to (say for instance it is 1 inch = 100 ft) I am coming up short of the 2 inches it should be (typically come up around an 1-15/16" or around 194 feet, approx 97% of the correct amount).
In the Page Setup Manager in AutoCAD, I have the following options selected (see the print screen as well):
Printer/plotter selected: DWG to PDF.pc3
Paper Size: ANSI full bleed B (11.00 x 17.00 Inches)
What to Plot: Layout
I don't have a plot scale scale other than the default 1" = 1'
No plot style selected
Then, on the print menu when I open the PDF that I have exported from AutoCAD, I have the following settings (see the print screens I have attached):
Printer: The printer I use (Konica Minolta c650 Series PCL)
And I have selected the Options "Auto Rotate and Center" and "Choose paper source by PDF page size**"
** Note, that I have tried unselecting the "Choose paper source by PDF page size" option and accordingly changed the paper size in the "Page Setup..." button at the btoom to match the document size (i.e. 11.0 x 17.0in) and it gets the difference to be closer (i.e. I now get 198 ft but some of my border gets cut off). See the print screen below for this a print screen of the print menu and sub-menu of Page Setup showing the paper size selected.
I saw that some people in other forums state that there is no real solution when trying to scale off of PDF's and that there should be a disclaimer saying as much if you are to send the file out to a customer who may rely on doing some in the field scaling from the printed copy of the PDF file. I find it hard to believe there is no solution as we have received some drawings from others whom the scaling works just fine.
AutoCAD 2013 :: Scale Of Drawing Field Versus Scale Of Object
Jun 27, 2013When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
AutoCAD Visual LISP / AutoLISP :: Set Plot Scale By Annotation Scale?
Aug 9, 2012I am working on automating page setups in model space and am looking for a way to set the plot scale equal to the annotation scale for scaled drawings with
(setvar "filedia" 0)
(setq a (getstring (getvar "cannoscale")))
(command "-plot" "YES" "MODEL" "" "" "" "" "" "" !A "" "" "" "" "" "" "_Y" "_N")
Setting the plot scale with !A causes the lisp to fail. However, when running each prompt through the command line individually, !A works fine. what is missing?
GIMP :: Dot Button Beside Scale That Auto Sets Scale Back To Default?
Jan 5, 2012When I'm editing pix, and need a quick large solid brush for a couple seconds, (1-inch dia), I slide "scale", but it's nearly impossible to manually rest scale back to default without restarting Gimp...
Can there be a dot-button beside scale that auto-sets scale back to default..? and/or a timer on scale changes that resets scale back to default after ten-seconds..?
AutoCAD 2013 :: Blocks Insert At Large Scale In 2014 - Correct Scale In 2012
Nov 22, 2013I am trying to insert a block into a file in Acad 2014 and it comes in too large. If I insert the same block into the same file using Acad 2012 it comes in at the correct scale. Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.
There must be some variable or variables I'm missing.
AutoCAD Architecture :: Synchronize Annotation Scale To Viewport Scale?
Mar 29, 2011I have a Viewport set to scale 1:100 and the Viewport is locked.The Annotation Scale displayed in the Viewport was 1:50.
When I clicked on the Synchronize Icon beside the Viewport Scale, the Viewport Scale changed, even though the Viewport was locked.
I was expecting the Annotation Scale to synchronize to the Viewport Scale.
Is this how it is supposed to work? and why does a locked Viewport Scale change?
AutoCAD 2013 :: Block To Scale Based On Plot Scale?
Apr 19, 2013I have a block that i would like to scale based on the plot scale when plotting.
We set up our drawings full size and occasionally we want to plot them at half size. We do this by setting the plot scale to 1:2 (custom) in the plotting dialog. We have a few blocks that we want to print at the same size on paper, essentially become twice as big.
Is there is a way to fix the size or just set a few scale states and have them automatically adjust based on the plot scale (not drawing/annotative scale)?
AutoCAD Civil 3D :: Making Annotative Scale Different From Viewport Scale
Nov 8, 2013I have a drawing with several layouts, and in one particular layout only, I want the text to be smaller than the annotation scale would dictate (the viewport is 1"=300', but I want the text to display at 1"=50' annotation scale).
I tried selecting the viewport and changing the "annotation scale" property to 1"=50', then the "standard scale" property to 1"=300'.
Strangely, this seems to work for a bunch of MText objects I have in the drawing, but it won't work for an alignment station label group or for a particular linetype...for some reason, those two things insist on having their annotation scale equal to the viewport scale.
I tried messing around with the alignment station label group's style but couldn't figure anything out. As far as the line/linetype, I'm completely at a loss why that one wouldn't change.
AutoCAD Inventor :: Scale A Part With Different Scale Factors In 3 Directions
Apr 15, 2013I have a 3D part, which I want to scale down to 0.5 the size in X and Y direcions, but I don't want to scale it down in Z direction.
Is this even possible? How do I go about doing it?
AutoCAD 2013 :: Viewport Scale List - Zooms With Each Scale
Sep 6, 2013AutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.
View 1 Replies View RelatedAutoCAD 2010 :: Annotation Scale Is Not Equal To Plot Scale
Mar 15, 2011I work in autocad 2010 and I draw in scale 1:1 . What an annotation scale is, moreover I have never used annotative objects in my drawings.
Nonetheless, when I try to plot a drawing, while I am in the model view, I choose the scale in mm/units, I select the plot area and when I press preview or plot, I get the message THE ANNOTATION SCALE IS NOT EQUAL TO THE PLOT SCALE. DO YOU WANT TO CONTINUE?
I press yes, I print it and the outcome is always a bit smaller than it should be.
When i am in the layout mode and I try to plot, I dont get this message. But I dont know how scaling works in this case. For example I want to plot in a A4 paper, scale 1:100. So I type 1000mm/100units, as I did in the model mode, but the result is wrong.