This is a thread for everyone to post their Photoshop work space. Mine is so boring, but it is all I need, as I don't use swatches, etc. When using over 20 layers, I like to see them clearly.
View 9 RepliesIm working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies View Relatedwhen I open my work it opens, I can see the layers on the side, but I can't see the work space
View 3 Replies View RelatedI using a trial version of CS 6 on windows 8 pro. I keep getting flashing in the work space / background when I zoom or move an image around (only some images not all). When I zoom or move an image around the background changes from transparent to various shades of gray to black. I was getting it with selections but after making some changes in Catalyst I fixed it. I have the latest driver for my card. I won't purchase it until this issue is resolved. I see many others have the same issue. It's been a long time since CS6 came out and I'm concerned this won't be fixed. I can just continue to use an older version if need be. I don't want to have to buy another video card just to use PS CS6 properly. If I turn off "Use Graphics Card" it seems fine.This card works fine with other versions so what had changed. At $700 I expect to be able to use it with my video card (AMD Radeon HD 6450) which is not too old.
View 1 Replies View RelatedI'm an illustrator and only really just started using Photoshop for anything past basic colouring because I usually prefer vector lines and only just brought a tablet.
When I start a new picture in photoshop it's always the same set up for it, 1500x1000 and 150 dpi, It's a good middle ground for me and the workspace is always easily expandable. That's all fine.
When I open an Image in Photoshop CC the image does not appear in my work space. The tab identifies that the image is opened, layers shows the image is open, however it is not on the screen. All tools, brushes etc work, but I can't see what they are doing. I can only see the image if i click the tab and move it around. Once my mouse lets go of the image window it dissapears again. After moving it around and such it gets buggy and the image crashes not Photoshop. i have attached two screen shots of my problem. the second with the image, i have my mouse clicked, held down holding onto the window to acheive this.
View 1 Replies View RelatedHow do I change the work space to a color so my computer screen won't show through Submit question ?
View 3 Replies View RelatedIm using cs5 and while editing with brushes the work space color keep flickering on and off and sometime it changes from gray to black.
View 3 Replies View Relatedjust set up a new computer -Vista Ultimate 64 bit and cannot get the spacebar to work as a hand tool in Photoshop.
View 15 Replies View RelatedAccustomed to Element 5. New to 9. How do i change workspace color? I don't like the grey and black backgrounds or headers. All is too dark and it's distracting.
View 2 Replies View RelatedHow can I increase my work space (the photoshop file open) ? I've tried Image > Image Size but when height or width is changed, the whole picture is enlarged to fit into the new size.
I would like to keep the image and simply add 200px to the bottom of the file, is this possible?
I have trouble to find the maximum work space for A4 paper size when I want 1:1 measurements on A4 paper. The stuff I draw must keep the 1:1 measurements
I want to go maximum .
Go to Tools/Options/Workspce/Customization/Commands/Text and drag the Line (Line Spacing) icon on to a toolbar. The Change Document Defaults dialog opens with various options available. If I click on any of the check boxes or the Ok, Cancel, or Help buttons, nothing happens. The only button that works is the Close button (top-right button with the X in it).
View 3 Replies View RelatedPSPro X XP Home. The clone brush stopped working, I restored PSPro to its default state. Now I only have about half of a working screen with loads of folders showing below still not being able to use the clone brush.
View 1 Replies View RelatedJust upgraded to PSP4. In the older versions I could open multiple images into the workspace. Each one had a border with a banner at the top identifying each picture. Each one would come forward by clicking on it. I could move them around and position them so I could even clone from one to another. Can I not do that in PSP4,
View 1 Replies View RelatedHow to reset the work space back to default settings?
View 1 Replies View RelatedI want to search and replace value of block reference in layout1. But I do not want to replace that block in layout2 or layout3.
View 2 Replies View RelatedI have found that since installing the service pack for 2014, xclips in paper space have become blank, or, on occasion, 1 will show, but others won't. The invert still works, strangely enough.
View 1 Replies View RelatedJust up graded to Autocad 2012 (student version), how to turn the work space from the new ribbon format to the classic workspace, or if it is possible to do so, as know how on the full version but cant see it on student...
View 6 Replies View RelatedI have been trying to dock three palettes vertically on the right side of my work space but have had no luck at all. I have preferences checked to allow docking and have used the drop down on each palette to mark "docking" as opposed to floating. However, the palettes always stack horizontally (left to right) and very large as opposed to vertically and sized as I want them. I can float each palette and drag each to the right of the screen as shown but they will not dock like this. I have attached a capture file of what I want to happen and another with what happens.
View 5 Replies View RelatedIs there anyway to add a tool palette into a work space using the customize user interface?
View 2 Replies View RelatedFor some reason when I place new text or line work in a file it is fine, but when I save the drawing, close it and re-open it all of the text and line work found in model space goes gray. Yet if I place new text and use the match property command on text placed previously, that is now gray, and use it on new text, the new text recieves the attributes of what the previously placed text has minus the appearance of being gray. In my drawing I am using a shape file and a data connect image through planning and analysis.
View 1 Replies View RelatedToday, all of a sudden, two of my most used functions—holding down the space bar to move the image around and holding down CMD-space bar to zoom—just up and quit on me (I do like the "Scrubby" but it took a little getting used to. It's very touch screen-esque).
I did all of the normal trouble shooting such as deleting the prefs, relaunching, restarting, etc. Nothing. The functions work fine in the other CS5 programs.
I checked through all of the prefs thinking that perhaps I accidentally changed something but I couldn't find anything. If all else fails, I'll do an uninstall/reinstall but only as a last resort.
I did notice that Adobe finally fixed the Distort (in Full Screen Mode) bug that was killing me in CS4.
[URL] Bug is where the Hand move (by holding down Space bar and dragging) stops working. Issue appears to be a conflict with web browsers.
This bug is still present in Photoshop version 12.1 (CS 5). I don't use Firefox, I use Safari and Chrome. Quitting Safari did not fix the problem. Quitting Chrome DID fix the problem.
What is the difference between Adobe RGB(1998) working space, and CIE Lab space?
View 3 Replies View RelatedIn 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View Relatedafter discovering zones and the space evaluation tool I wonder whether it is possible to customise the XLS output further by also reading out information from a property set attached to the space?
The office standard is to have a property set attached to each space that defines a room number (which is the level ID plus a number, say G-01), the area and the space name.
We used to simply schedule the areas with a schedule table. That only gives us net rooms, no subtotals per department (or say per flat) and no grandtotal.So we got as far as using zones grouping the spaces in each flat.
Now I need an area schedule XLT template that also displays the room number from the space's property set and the schedule grouped in a fashion that I get subtotals per flat (=my zones) in another column and a grandtotal.Playing with the Space evaluation tool I seem to only ever get Room/ zone names and their areas.
I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View Relatedhow do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?