Paint Shop Pro :: Dock Three Palettes Vertically On Right Side Of Work Space?
Oct 19, 2013
I have been trying to dock three palettes vertically on the right side of my work space but have had no luck at all. I have preferences checked to allow docking and have used the drop down on each palette to mark "docking" as opposed to floating. However, the palettes always stack horizontally (left to right) and very large as opposed to vertically and sized as I want them. I can float each palette and drag each to the right of the screen as shown but they will not dock like this. I have attached a capture file of what I want to happen and another with what happens.
View 5 Replies
ADVERTISEMENT
Jun 16, 2011
PSPro X XP Home. The clone brush stopped working, I restored PSPro to its default state. Now I only have about half of a working screen with loads of folders showing below still not being able to use the clone brush.
View 1 Replies
View Related
Sep 29, 2011
Just upgraded to PSP4. In the older versions I could open multiple images into the workspace. Each one had a border with a banner at the top identifying each picture. Each one would come forward by clicking on it. I could move them around and position them so I could even clone from one to another. Can I not do that in PSP4,
View 1 Replies
View Related
Oct 13, 2011
I've just recently purchased PSP X4 since they touted that it was much faster loading and more stable (X3 was horrible about crashing). I continue to be amazed at how they (Corel) can just keep digging a hole instead of actually improving this product. I can see why they continue to lose market share.
1) I can no longer open mulitple images at the same time for side-by-side comparison. The work area now will only accommodate 1 open file at a time.
2) I miss not having the file size included in the data box that appears when you hold the cursor over a thumbnail. It was always handy when downsizing (resizing) photos for posting.
3) It is a pain now to have to go back and forth from the "EDIT" tab to the "MANAGE" tab to view full-sized photos (without having to open one at a time). They really screwed the pooch in X2 or X3 (can't remember) when they got rid of the old Organizer format. It was soooo easy to navigate; you had a screen full of thumbnails, you saw what you wanted and clicked it open....just too easy I guess!!! I was hoping they would go back to it for this version. I know in other forums, this change really rankled a lot of users. They just seem to bounce around trying different things. I wonder who the h*ll they use to test this stuff in-house.
I do like the faster speed, but don't know if I'll go for any more versions after this or not (been here since V.7 when JASC owned it). Big mistake selling if off to Corel. I've just about had it and there is some decent up and coming competition out there nowdays.
View 3 Replies
View Related
Jan 29, 2013
Computer Asus G50VT, Processor Intel Duo T9400, 4 BG Ram, 2 x 500 GB HDD, Nvidia GeForce 9800M GS 512 MMB
I just move from Win VIsta Ult. to Win 8 Pro 64bit.I installed PSP x4. The installation went fine, but when I try to start the program I get the following error:
The application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more details.
I am missing Visual C++ runtime files, but I installed VC++ runtime files 2005, 2008 and 2010 both x64 and x86. Didn't work.
I also tried to install PSP x3, same error...
I ran sxstrace.exe but it means nothing to me. See the results below:
=================
Begin Activation Context Generation.
Input Parameter:
Flags = 0
ProcessorArchitecture = Wow32
CultureFallBacks = en-GB;en;en-US
ManifestPath = C:Program Files (x86)CorelCorel PaintShop Pro X4Corel PaintShop Pro.exe
[code]....
View 1 Replies
View Related
Feb 22, 2012
I am sure that you must be able to do it...surely..but how can you see images side by side, so that the original is on the left and the edited on the right?
View 6 Replies
View Related
Jul 18, 2013
how can i change the edit workspace so i can view like that of photoshop cs2 cause i don't really care for this new tabbed interface lol, i'm using paintshop pro x5
View 1 Replies
View Related
Nov 1, 2010
I have tried everything that I know to do but cannot get the materials palette (and some others) to show in X3. I need to have the materials palette show so that, among other matters, I can change the color of text I add to the image. I did not have this issue with X2 and this issue is forcing me to go back to that older version.
View 8 Replies
View Related
Feb 8, 2011
I installed a new harddrive on my laptop and restored a Ghost image of my old drive onto the new one. Most of the installed software worked right off. Some needed to be re-activated as the software detected a significant hardware change. However, PSP X3 would not start, crashing during loading. The PSP X. splash shows and the loading status gets to "initializing palettes" then Windows reports "Corel Paintshop Pro X3 has stopped working. Windows is checking for a solution...". That's it.
I have un-installed PSP X3 and reloaded from CD. I downloaded the 4 existing patches (1 through 4) and installed them in sequence. I didn't try starting PSP X3 until all the patches were in. Corel.com confirms the activation of the software.
I've used PaintShop since the JASC days and the software works great. However, since about version 9, the software has become more prone to crashing under a variety of circumstances. Now it won't start.
Specs
1.8 GHz laptop
3 GB RAM
500 GB Seagate Momentus XT drive with 4 GB RAM buffer (supposedly a "hybrid" drive)
Windows 7 Pro 64 bit
View 13 Replies
View Related
Nov 18, 2013
In X4 I could set the pallettes I wanted (layers and History) to a docked position on the RHS. With X6 the pallettes cover the RH part of the window and the image, with the opened image centred on the whole screen so that the RH part is cut off. It can't be centred within the area visible when the pallettes are open. This gives a smaller visible image if the whole image is in view. This is a serious issue, which X4 handled ok ! I've tried all the options but cannot get X6 to behave like x4
View 3 Replies
View Related
Oct 23, 2011
I'm using an image to try and create a banner ad for a website. I'm trying to add text to the side of the image (not on the image itself) but am struggling to find out how to do this.
View 2 Replies
View Related
Jul 25, 2012
Is it possible within the drawing to have model space and paper space displayed side-by-side like two vertical split screen viewports?
View 3 Replies
View Related
Jan 25, 2012
I downloaded a trial version of PSP X4. When i export an image from ASP in ProPhoto RGB color profile, PSP insist to convert it to sRGB. I wonder what is the color profile that been used by PSP as the working space?
View 9 Replies
View Related
Sep 26, 2011
I need to save a .jpg in a certain format which is
- Resolution: 72 dpi
- Color space: RGB 32 Bit.
Just wondering how I would go about this?
View 8 Replies
View Related
Jan 5, 2012
I have PSP x3 on my computer, it uses over 1 gig of space on my hard drive. I just installed PSPx4 on my computer and it only uses a little less than 400 megabites. Is this correct, or is something not right here. Also did they replace Express Lab with Adjust?
View 6 Replies
View Related
Oct 10, 2012
I have been using PSP9 for many years now. However, after trying out PSP X5 I liked some of the new features, so I decided to upgrade. Now I'm starting to regret it... For some reason, the new version creates this little "empty space" at the end of text which I cant figure out how to get rid of! I attached a screenshot to show you what I mean. Is there any way to remove this?
View 3 Replies
View Related
Aug 7, 2013
I need to rename tens of thousands of photos and while I have the batch rename tool working just fine.I'm using custom text and sequential numbering. However, I need a blank space between these two fields. I'm using X4 on Windows 7.
View 1 Replies
View Related
Jan 23, 2012
How to adjust the user interface color (dark to light)? I tried used changing the color working space colors but it didn't seem to make a difference. dark interface hard to read.
View 3 Replies
View Related
Apr 24, 2012
I like to place tool bar on the right side of the computer monitor contiguous to the palettes. Is it possible to commit the tool bar to this location permanently?
View 1 Replies
View Related
Jan 29, 2012
I just downloaded and installed the PSP X4 Ultimate, I'd like to try it before I buy it. When I installed the software, I tried to access"Color Working Space", because I work with Adobe1998 and I wanted to change the work space, but every time I try to access PSP crashes.
View 2 Replies
View Related
Jun 3, 2011
I just got psp x3 and i can't get my text to work all it dose is put the 1st letter in and the rest is blank or it put the 1st letter and the 2nd is blank then the 3rd one come up and the 1st letter is gone. I up new up dates in and it doing the same thing
View 3 Replies
View Related
Sep 14, 2012
I currently have X4 Ultimate installed with KPT Effects & Nik Color Effex Pro 3. I now also have X5 Ultimate installed. Now X5 came with the same Nik Color Effex but I haven't installed it yet.Does KPT Effects from X4 will work in X5? Can I copy the folder from X4 into X5? (Same question pertains to the NIk Color Effex. Useful to install it again when it's already intalled to get it working in X5.)
I thought about just trying to point X5 to the X4 plugin folder but after just trying that with something else, I'm a little leary. I tried to point X5 to the Photoshop CS6 folder where AlienSkin Eye Candy 6 installed. But right after doing that and re-starting PSP, the startup box hung. I used task manager to stop it but the program still opened anyway. I knew that wasn't right, so I removed the link to that folder and X5 opened normally again. The newest installer for Eye Candy 6 won't let me do a custom install. So, how to get the filter working in X5.
Anyway, my main question is if I can get the KPT effects from X4 working in X5 and if so what I need to do.
View 11 Replies
View Related
Jun 15, 2009
I have 4 lines of text. They are currently in 4 separate layers as they are 4 separate buttons. How do I make sure the verticle space between them is even?
View 1 Replies
View Related
Jul 25, 2011
Having trouble with topaz remask plug-in. Is there another program that works with PSP or am I out in the cold?
View 2 Replies
View Related
Oct 10, 2011
I used PSP X2 ... a few days ago I bought x4...but I dont know how the text tool is working properly..
Is it possible to change it, that it will work like that one in X2 ?
I cant move the text after I wrote something in a picture.and where is a text-input window ?
every time a open a picture and choose the text tool it is in "vector mode" but I do not want this mode.
View 8 Replies
View Related
Feb 23, 2012
under Windows 7 pro and psp13.2.0.14 it don't work anymore. I even try to make it work in an old version of psp: V9.10. It still didn't work. Does any of you know something about kpt 5.1? I think it fail because of upgrades by Windows7 pro.
View 2 Replies
View Related
Jan 13, 2014
I want to create a banner heading from two pics side by side, but mixing together at the centre with about a 15% overlap into each other.
View 1 Replies
View Related
Jun 13, 2011
I just downloaded PSP 13...I can't put a few photos on the work space....I only see one photo at a time and when I move a photo I see the checkered area and not the other photos...at the top left I see the photo names and i can click on them and the photo appears but only one at a time...around each photo I always had an area where I could see the X at the top right , click on it and the photo would leave...but now it's hard to see where the X is...
View 2 Replies
View Related
Dec 3, 2011
I am trying to use Color Balance and the window doesn't work. The only part that shows is the "Enhance Color Balance" box, the words "purple" and "green" just above, and the preview arrow (which does nothing) and "preview on image". Preview on image is checked and it does show changes but I am unable to uncheck it. Nothing else shows. Nothing I have tried has worked, including restarting the computer.
View 6 Replies
View Related
Jan 25, 2013
got the new Alien Skin plugins to work. When you install Alien Skin, you install to a single directory, both 32 bit and 64 bit plugins. Then in X5, File Locations, I put that directory in the settings but still nothing. maybe X5 doesn't work with them.
View 1 Replies
View Related
Nov 11, 2013
I've clicked link on two layers and set 'Link Set' to 1 on both. I want to make a selection, and move what is in it. But with the contents from two or more layers, not just one. The move tool seems to always move the background layer, although it's locked. What am I missing. I've been looking for this basic feature for a long time. How does the link layers function work?
View 8 Replies
View Related
