Paint Shop Pro :: Color Space - RGB 32bit
Sep 26, 2011I need to save a .jpg in a certain format which is
- Resolution: 72 dpi
- Color space: RGB 32 Bit.
Just wondering how I would go about this?
ADVERTISEMENT
Paint Shop Pro :: Color Profile To Match LR Export Color Space
Nov 21, 2011I'm exporting Tiff Prophoto files from Lightroom into PSPX4 for further processing. The images are 1 to 2 stops under exposed when compared to Lightroom's image.I have selected PSPX4 color profile to match LR export color space.
I have tried exporting the Tiffs as sRGB and adode1998 and still the images are under exposed. I have little knowledge about color management and have searched around the web for possible answers, but no luck.
Paint Shop Pro :: X4 Working Color Space
Jan 25, 2012I downloaded a trial version of PSP X4. When i export an image from ASP in ProPhoto RGB color profile, PSP insist to convert it to sRGB. I wonder what is the color profile that been used by PSP as the working space?
View 9 Replies View RelatedPaint Shop Pro :: X4U Crash When Try To Access Color Working Space
Jan 29, 2012I just downloaded and installed the PSP X4 Ultimate, I'd like to try it before I buy it. When I installed the software, I tried to access"Color Working Space", because I work with Adobe1998 and I wanted to change the work space, but every time I try to access PSP crashes.
View 2 Replies View RelatedPaint Shop Pro :: X4 And Hard Drive Space?
Jan 5, 2012I have PSP x3 on my computer, it uses over 1 gig of space on my hard drive. I just installed PSPx4 on my computer and it only uses a little less than 400 megabites. Is this correct, or is something not right here. Also did they replace Express Lab with Adjust?
View 6 Replies View RelatedPaint Shop Pro :: Only Half Of Work Space Shows
Jun 16, 2011PSPro X XP Home. The clone brush stopped working, I restored PSPro to its default state. Now I only have about half of a working screen with loads of folders showing below still not being able to use the clone brush.
View 1 Replies View RelatedPaint Shop Pro :: Removing The Empty Space In Text
Oct 10, 2012I have been using PSP9 for many years now. However, after trying out PSP X5 I liked some of the new features, so I decided to upgrade. Now I'm starting to regret it... For some reason, the new version creates this little "empty space" at the end of text which I cant figure out how to get rid of! I attached a screenshot to show you what I mean. Is there any way to remove this?
View 3 Replies View RelatedPaint Shop Pro :: Batch Renaming - Inserting Space
Aug 7, 2013I need to rename tens of thousands of photos and while I have the batch rename tool working just fine.I'm using custom text and sequential numbering. However, I need a blank space between these two fields. I'm using X4 on Windows 7.
View 1 Replies View RelatedPaint Shop Pro :: Changing Working Space Colors
Jan 23, 2012How to adjust the user interface color (dark to light)? I tried used changing the color working space colors but it didn't seem to make a difference. dark interface hard to read.
View 3 Replies View RelatedPaint Shop Pro :: Multiple Images In Work Space
Sep 29, 2011Just upgraded to PSP4. In the older versions I could open multiple images into the workspace. Each one had a border with a banner at the top identifying each picture. Each one would come forward by clicking on it. I could move them around and position them so I could even clone from one to another. Can I not do that in PSP4,
View 1 Replies View RelatedPaint Shop Pro :: Dock Three Palettes Vertically On Right Side Of Work Space?
Oct 19, 2013I have been trying to dock three palettes vertically on the right side of my work space but have had no luck at all. I have preferences checked to allow docking and have used the drop down on each palette to mark "docking" as opposed to floating. However, the palettes always stack horizontally (left to right) and very large as opposed to vertically and sized as I want them. I can float each palette and drag each to the right of the screen as shown but they will not dock like this. I have attached a capture file of what I want to happen and another with what happens.
View 5 Replies View RelatedPaint Shop Pro :: Color Replacer Drops Selected Color For Replacement?
Oct 18, 2012For family history purposes, wish to improve the legibility of some hand written 1930 telegrams; the ink has faded with time so I want to change its colour to black. The form printing has not faded.
The user guide draws attention to the fact that the color selected for replacement must be in the image. Using the Dropper tool with sample size 1 pixel I position the dropper where I want it, see the color in the preview window, then right-click and the selected color appears in the background window on the Materials panel. So far, so good. I then place the Dropper tool over black in the swatch on the Materials panel, click and black appears in the Foreground window of the Materials panel. I think I'm set.
When I select the Color Replacer tool the background window immediately reverts to another color, usually white.Incidentally, the user guide suggests you read up on selecting colors with the Dropper; when you do this you learn that its OK to pick colors from the Materials panel.
Paint Shop Pro :: Change Color Saturation To Use For Color Changer?
Jul 29, 2011Question #1.
Were can I change the "color saturation" to use for my "color changer"?
Question #2.
When using "point-to-point" or "edge seeker", is there a way to go back one or two steps, without having to start all over again?
Paint Shop Pro :: Change Color Of Paint Brush In X3?
May 15, 2012I want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
Paint.NET :: Save File With RGB Color Space
Sep 15, 2013A printer ask me to save my file with a "RGB color space". How do I do that in Paint.NET?
View 12 Replies View RelatedLightroom :: Output In SRGB Color Space The Resulting Files Have Adobe RGB Color Space
Mar 1, 2013When I export RAW files, specifying that I want the output to be in sRGB color space the resulting files have the Adobe RGB color space. The same is true if I specify I want them in ProPhoto. Is this a bug? I have done it successfully in other versions of Lightroom, but not in 4.3.
View 21 Replies View RelatedPaint Shop Pro :: HDR And Color Profile
Aug 19, 2012I have PSP X4 SP2.
Current color working space: AdobeRGB1998.icc.
I want to take HDR photo. I have 3 pictures JPG in AdobeRGB1998. When I giving HDR/MERGE EXPOSURE program automatically changing color profile of my pictures from AdobeRGB for sRGB. Why does it happen?
Paint Shop Pro :: Workspace Color In SP1
Jan 25, 2012Just updated from X3 to X4. Spent an hour looking for the workspace color so I could get rid of the huge graphite box. Updated to SP1, found this forum, saw how to change the color in the files menu, and was very disappointed that the menu backgrounds changed, but not the BIG GRAPHITE BOX IN THE MIDDLE OF THE SCREEN!!
X3 gave us control of the colors. X4 is a big disappointment.what about the big graphite elephant in the room, the workspace?
Paint Shop Pro :: X4 Does Not Print In Color?
Sep 15, 2011When I try to print, the print placement dialogue box shows the image in greyscale, and when I click the options tab, the options to print color and CMYK separations are greyed out. Going ahead to print gives me a B&W print. The same file prints perfectly in color in PSP X3. What setting I need to tweak?
View 2 Replies View RelatedPaint Shop Pro :: How To Change The Pin Color
May 17, 2012the image is attached.I would like to make the pin "blue", without loosing "real" appearance.
View 6 Replies View RelatedPaint Shop Pro :: End To End Color Management
Dec 24, 2013I understand many of the aspects of color management: gamut, color space, profiles, calibration, and most of the accompanying pieces. The problem is that I don't understand the inter-relationships of the various steps between taking a photo and printing it.
My equipment is not wonderful. If I were serious, I would have spent 10x what I did; but I'm not a pro. I'll settle for the best I can squeeze out of it. My goal, at this point, is to get my prints to look like what's on the screen.
For software I am using PSP X6 and Windows 8.1.
The photos I get come from various sources. As I understand it, those images (primarily JPEG if they come from a camera, presumably RAW if I scan directly into PSP) should have the profile of the capturing device embedded in them. Is that correct?
In the past I've been told that I should always use the color management in my editing application, rather than whatever Windows makes available. Is that still true? So far as I can tell, there is no way to turn off Windows Color Management (WCS).
You can turn off color management in PSP. There is a checkbox for it.I've been reading that I should set my PSP color working space to sRGB. Is that turned on and off by the color management checkbox? Assuming I have a profile for my capture device (camera or scanner), should I use that profile instead?
I have factory supplied profiles for both my monitor and my printer. Supposedly the printer will automatically select one of its various profiles based upon the paper I use, but that's a setting in WCS. (I can force a particular profile if I want.) In PSP's color management, I have to pick the profile manually.
Should I turn off color management in PSP, and set everything up in WCS? WCS has a setting for viewing conditions. The default is "WCS profile for sRGB viewing conditions", the alternative is "WCS profile for ICC viewing conditions". Does that mean that I could (or should) get an ICC profile based upon my work area's lighting, etc.
Paint Shop Pro :: Space Added To End Of Text / Text Off-center?
May 8, 2011I do a lot of CD designs, and often I have my text centered on the front covers. When I put the text centered, however, PSP is added an extra space to the end of text, so when I center it on the canvas the text is actually off-center to the left. When I go into edit the text, there is no space on the right of the words to delete.
With the text selected this is how it looks: The right edge of the frame should be flush with the right edge of the last 'T'.
Paint Shop Pro :: X4 Default Workspace Color?
Sep 9, 2011In the X3 version there was a menue setting for the color of the work space where you could change it and not have to use the Graphite color. In the X4 version there is nowhere to select non default color. There should be as not everyone wants to be forced into having it the default"graphite or whatever"color.
View 10 Replies View RelatedPaint Shop Pro :: Create 2 Color Only Picture?
Jul 3, 2011I no longer have my Paint Shop manual and I don't know what "this" is called to search here or in my help section of my software.
I have Paint Shop Pro Photo X2, version 12.00
I want to change a pic I have of Jimi Hendrix like the one below so I can sketch it onto a canvas. I have played around with Photo shop.
73164_145358045511754_102317626482463_234732_3842573_n.jpg (20.36 KiB) Viewed 586 times
Paint Shop Pro :: Where Is NO COLOR In X4 Materials Pallet
Sep 1, 2012Coming from Pspx2 into Pspx4 this week. Applied a text title to a border on an image yesterday. Accustomed to having just a background colour for plain text. Went to click off the foreground colour and could not find a choice for NO COLOUR in the foreground Also No text box.....what happened to the text box?
What is the procedure for plain text with a single colour now in Pspx4
Paint Shop Pro :: Getting Color Bars Across Photos
May 8, 2013I am having a rather strange problem with PSP X14. I will describe my general workflow and where the problem occurs.
I do some editing to my photo and save it as a full size image. Next I resize it to a much smaller version for use online. I have no problems at all with these two steps. Next, I cancel the resized dimensions and resize it again to a file closer to the original size, after I sometimes sharpen it and add a canvas. Many of the thumbnails for this last step have horizontal color bars across the bottom of the thumbnail, ranging roughly from 1/16 to 1/3 of the image size. When I hit on it and open the file, the bar is not there. I tried opening this thumbnail in another photo editing program and when I have access to the thumbnails for opening, that bar is there on select images, and when I open the file, it's gone. Unfortunately I haven't had the opportunity to try printing it yet.
I've been following this basic formula for preparing and editing photos for a very long time and haven't had this problem until recently. And it's random, as not all images have this problem. I tried changing this process and reopening the full size file that has been edited and resize that one, but am getting the same random results. I have no problems with the thumbnails for the full size and the first reduced size images.
I have been a long time user of PSP...since v.7 and upgrade versions regularly. I'm running Windows 7 premium, 64-bit on a laptop with an Intel i-7 processor.
Paint Shop Pro :: How To Get Nik Software Color Efex
Jun 9, 2013In my PaintShop Pro X4 there is a plugin called "Color Efex 3.0 Pro Complete" by Nik Software. Can I get that plugged into my PaintShop Pro X5? How?
View 2 Replies View RelatedPaint Shop Pro :: Color Efex Pro Integration
Dec 8, 2011I downloaded the trial of PSPx4 and sadly enough the trial does not include Nik's Color Efex Pro 3 (CEP3). What I would like to see, is if the CEP3 window actually fills the screen, or if it is smaller and the user unable to "maximize" it.
View 4 Replies View RelatedPaint Shop Pro :: Change Background Color
Feb 1, 2012I'm testing the trial of X4, and it opens in an unpleasant window which has a dark gray background - is it possible to change the color of this background?
View 13 Replies View RelatedPaint Shop Pro :: X4 - Replace Color To Transparency?
Apr 8, 2013Any way to simply remove a color by replacing it with a transparency? More specifically, the background of my image is solid black but the object itself is a little too intricate to cut out via the selection tool.
View 1 Replies View RelatedPaint Shop Pro :: How To Plugin Nik Color Efex 3.0 To X6
Aug 23, 2013I tried moving Nik Color Efex 3.0 out of PSPx5 Plug Ins folder into PSPx6 Plug Ins folder, but that didn't work. Tried plugging in via Preferences...File Locations...Plugins... but that didn't work either.
I installed 64 & 32 bit version per the installation instructions. Is there anyway I can install Nik Color Efex that came with x5 into x6?
