When I draw an object with the rectangle tool then I can manipulate it afterwards with the pen tool (add anchor point). But when I merge 2 objects with "merge linked" the object seems to be rasterized and I can't manipulate it with the pen tool anymore. How can I prevent merged objects to be rasterized or at least be able to manipulate merged objects with the pen tool.
View 4 RepliesI am having “Out of RAM” issues with operation CS6 can handle with no problems.Memory allocations (access) seem to be a problem. CC and CS6 preferences are set the same. I have 9GB of RAM on a 64-bit Windows system, and the RAM allocation is set to 85%. Sometimes a file from the RAW converter will not open.
View 15 Replies View RelatedJust upgraded to CS5.1 I see contact sheet II has changed and is handled by Bridge / Output module.I don't like that you can't print directly from Bridge, but have to save as a pdf, then reopen the doc and print from Reader or PS.I can only hope that changes.
I created a custom layout in Bridge, 3.9 inch x3.9 inch at 300ppi. 3 across and 3 down. Made the contact sheet, saved as pdf. Opened in CS5.1Here's the problem. The document which is suposed to be 3.9.x3.9 (square) is actually 3.092 inch x 2.318 inch (not square!).
The reason for the problem is that I drag and drop the contact sheet onto another document template (it has logo, name, etc.) to print. The other document is 4.5" x 4.5" So the contact pdf doesn't fit the template. (This used to work great in CS3 as you didn't have to save the contact sheet as it was created. It was a layered doc which you could drag onto another doc / template.) I can't see any reason the contact sheet would not be the same as created in Bridge / output mod. when opened up in CS5
hold to create one merged layer from all my other layers, but still having them available underneath the merged layer?
View 4 Replies View Relatedhow to delete layers/items from the 3D layers panel? Specifically, 3D layers that have been merged. I merged few 3D layers and need to remove some unwanted items that are left behind.
It would seem like a simple task but I've ended up with one 3D layer in my layers palet and a list of layers in my 3D palet that are all locked. Is this normal? Attached is a screenshot of both layers palets and my doc mode, just in case.
I exported a project as a pdf by clicking Save As under the file menu, then I saved the original psd by choosing Save As again and selecting PSD this time. When I came back to the project today all the layers had been merged into one. I _never_ merged them myself. Is there any way I can recover all that work or have I been hosed by this "feature"?
View 2 Replies View RelatedI'm working on a tutorial for doing a website mockup in Adobe PS. In one of the steps, it says:"With the header area selected with a mask press CMD+SHIFT+C to Copy Merged, then paste on a new layer."
This doesn't make sense to me because I don't know what reason there would be to add a mask to the header layer. And even when I try it doing what they say, it doesn't do anything.Here's a link to the tutorial: URL]....
I am new in Photoshop version CS5 I am trying to copy some different layer and merged to new image. Without successful.
I add attachment for example.
I try to merged two layer
| layer is blue color
|| layer is purple color
I selected the two layer by arrow mouse And I go to menu edit Copy Merged but this feature is not enabled.
After this I should type ctrl + n and past the Copy Merged.
I merged some images in Photoshop and the sky is now stepped. I want to extend the lowest part of the sky to equal the highest part of the sky. How can I do this in Photoshop? The images was made up of 16 images, and is now a .PSB file.
View 4 Replies View RelatedI have two layers.. One is a simple shape with a raised bevel.. The other layer is text centered over the shape with a bevel of its own that makes the text look engraved.. The problem is when I go to merge the layers, I lose the text layer effect.. I have to merge the layers so how can I stop the text bevelled effect from disappearing?
View 6 Replies View RelatedOk, so how do you scale a component in a merged 3D layer? There are rotate, role, slide, and drag modes...but where did the scale mode go from CS5?
View 1 Replies View RelatedWhy have colors in my merged image changed? I am running Photoshop CS4 on Windows 7 and I'm viewing 3-channel RGB images. Something has changed and the blue channel doesn't appear in the image and the green channel is now blue. Everything looks perfect according to the thumbnails in the channel window. But when I looked at the merged image in the central view, again, blue is gone and green is now blue.
View 1 Replies View RelatedI downloaded CS6 for the MAC and have been using it fine, come to use Photoshop 6 on my PC upstairs and a PDF which has been saved now opens on the PC but as one layer not the 20 layers that it is built up from.
View 8 Replies View RelatedI accidentally saved my PS file with merged layers, then quit. I can't believe I did that! Is there any way to reverse it?
View 2 Replies View RelatedI am unable to save a completed project as a jpg file even after carefully merging the layers. The only way I can do that appears to be to use Save for Web - and I do not want to compress the images as web images. Also, in Elements 9 I could open a PSE file in layers and continue to edit - in 12 I cannot do that. I'm really very discouraged and wish I had my Elements 9 back.
View 8 Replies View RelatedHere are a few copy merged layers, which I dragged in from another image; now I need to remove the extra stuff;
clicking on the mask icon gives the prohibitory sign.
I like to keep my layers carefully named. I often create new layers over existing ones to build up effects and paint in details. When I merge these layers, Photoshop always assigns the new merged composite layer the name of whatever the topmost layer was. I would much prefer it to default to naming the new layer whatever the bottom layer was called. I'm using CS5.5.
I might start with my assets in a file, with layer names like: Model, Field, Product, Logo, etc... Then add effects on layers called, Shading, Highlight, Package Detail, Lettering, etc... over each original layer. When merged, instead of being named the more-appropriate names, it will of course use the top layer names and I end up with my layers called "Shading, Highlight, Package Detail, Lettering. It's made much worse when I duplicate effects to modify and apply to multiple layers, then merge, leaving me with a file with layer names "Highlight, Highlight Copy 1, Highlight Copy 2, etc..." Renaming to my original layer names is very tedious as a result.
way of making a merged copy of a number of layers?
I know the Alt/Ctrl/Shft/E shortcut, but this requires turning evertything off except the layers to be merged. In a large doc with some layers already turned off, turning everything on and off quickly is not always straight forward.
Is there a way of merging linked layers perhaps?
How can I upload a merged photo to snapfish?
View 1 Replies View RelatedUsing Photoshop CS5 Extended, I have an image open with the 3D Workspace.
When I click on the 3D rotation tool the red horizontal / green vertical tool does not appear.
Please see the image below, I believe this is the tool that should appear but doesn't...
Is this a setting ? Where am I going wrong ?
I have an ugly sign on a wall behind someone I'd like to delete and replace with the nearby brick. What's the best tool to use?
View 5 Replies View RelatedI am trying to change this to win50k from Zip-P..I need to move the lightning bolt over..layer # 18..but I cannot grab and move the object with the hand tool..The help does not offer a simple answer to a very basic operation. Just want to move the lighting bolt to the right a bit..yes I think something this simple should be idot proof - and work like powerpoint...or the tool is too complex in my book...
View 5 Replies View Relatedto fill with the paint bucket ... or make sure i have a fill color selected. I have already tried that. Everytime i make an object, and close it off, it doesnt fill. And if i try to fill the object, it fills everything. And yes, i double check to make sure i am closing the object. After i get done drawing the shape, i can right-click with the pen tool and open the "Fill Path..." option, and tell it to fill it, and it will. But i want it to fill in when i am done drawing each shape. Is there anything that i can do to make this happen.
View 2 Replies View RelatedI am converting a print design in photoshop cs5 from RGB to CMYK. My Layer got merged after using convert to profile form RGB to CMYK.
after this i have save file and close it and i didn't have backup of this file.
Now How do i recover my all layers
i need only my layers back.....
When I select photos to merge, either via Bridge or within CS5 (Automate/Merge to HDR Pro), the Merged image appears over the CS5 screen. However, the bottom of the HDR screen with the photos selected for the merge along with the Cancel & Save buttons are cut off. The only way for me to exit HDR is to force quit.
My monitor resolution is 1440X900 which is better than the 1024x768 required for CS5.
[URL]
I used to make a really neat strip of merged images using PSE 4 and its photomerge feature. How can I make a merged group of photos blended and being aligned side by side horizontally like PSE 4 used to do? Using PSE 10?
View 5 Replies View RelatedLast autumn I took a photo of a rotten apple on some grass, with a tiny flower beside it. I used the regular lasso tool to cut and layer the apple, and then the flower (giving 3 layers). Upon closer reinspection, though, my lasso cut is a little jagged. So, I'm here asking what you guys do to cut out objects!
I am a fan of the magnetic lasso tool, but find that it can often leave very jagged edges when the object isn't clear cut. So, I thought I would be best to resort to the regular lasso tool, just with the photo zoomed in a lot and going little by little. That would be fine, except that I often click too fast from one point to the next, and Photoshop thinks I'm finished and stops the lasso there. That is soo frustrating! Is there any way to go back and edit after Photoshop has 'closed' the lasso selection?
Another thing I sometimes use is the magic wand tool, but as my background is grass, there's no way that I can get it to do what I want. Any suggestions?
In photoshop cs6, if you right click after slicing a object, you can get the objects coordinates(X,Y,W,H) in relation to the position on the screen. Is there any tool in PSE 11 that can give the coordinates of a object.
View 1 Replies View Relatedthere's an invisible 10px border around each object/shape. it's so frustrating when i'm working on small icons or whatnot.i'll try and give an example the best i can... say i have two squares overlapping and are offset from each other by a 5px or so. if i want to select the back square, i'd normally... click on the part of the square i can see. in cs6, if i just click on the visible part of said square, it would select the front square. i have to click at least 10px out from the back square to select it.
View 10 Replies View RelatedI am creating a new layer with a design on it. When I try to fill the object on the layer I am getting the following message:
"Could not use the paint bucket because the content of the layer is not directly editable".
When I am using clone stamp tool the object moves preventing me to use the tool. How can I prevent the object from moving?
View 1 Replies View Related