I am not getting any nice blending from the edges of the car to the background. When selecting I use 1 pix feather, but I still get jagged edges. Is there a way of make the edges look more blended in with background?
I changed the color of the car, added a carbon fibre pattern ect,ect.
I know how to blend selection edges of a selection in Gimp 2.8.2, but if I have only one side of a selection that needs blending, what should I do?
Lets say that I have a grey box on a black background and only want to blend the left vertical edge into the background.
When I use the square selection tool, the selection edges are rounded rather than square. I can't remember how to rset this.
How do you make the edges square by default?
In CS5 Photoshop View / show / "selection edges" stops being active - not sure why or how to turn it back on
View 5 Replies View RelatedIm trying to get used to using Quick Select and Refine edges to mask out objects in my photos.
It works pretty well but Im still having trouble in some spots getting the edge to be a smooth curve.
How do you get the refine edge function to allow you to modify its edge so you can have a perfectly smooth edge?
Ive tried using the Refine Radius Tool and it just doesnt smooth it out completely.
I use PS CS6 for Windows. When I select a layer by mean of Ctrl-Click on layers palette, selection edges is not shown. When I go to menu View > Show > Selection Edges i realize that option is disabled.
View 2 Replies View RelatedEverytime I try to cut something it says
"Warning: No pixels are more than 50% selected. The selection edges will not be visible."
Selection layer edges of a particular wall,
It is really exhaustive when it comes to select an edge of a layer of a wall. For example, if we need to align a column in the wall in the correct space, we need to select the corresponding edge of layer of the wall (indicated in the screenshots below). It really takes time just to select this edge (hovering + TAB).
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I have a vertical (rectangular) photo that I have pasted into a square canvas. I am looking to expand the photo to the edges of the canvas in a specific way: I want to stretch the edges of the photo (not the whole photo) such that the closer the photo edge is to the edge of the canvas the more stretched it is.
View 1 Replies View Relatedif i could create a photo of me & her together and so i did. the problem now is it looks fake..i find it pretty obvious that my pix has just been pasted. i had tried adjusting it colors, adding noise filter,adjusting its contrast & brightness, it's size but i can't seem to make it look natural.
View 8 Replies View RelatedI have this picture of the sky (wooooooooo). I figured out how to make the blue more vibrant using 'Selective Color'. But I cannot figure out how to make the clouds have more detail. My end production comes out rather flat.
View 3 Replies View Relatedmaterial regarding natural color matrix technology?
View 1 Replies View RelatedThe man I work for wants a demo cover for a CD. He is wearing a red flannel shirt (it is suppose to be funny/outdoors type cover). The expression he has and every other thing is just perfect but I want to replace the plaid with a color and /or another pattern(such as a dark blue denim). Is it possible to do so without losing the lines/folds of the shirt? I know I can play with the hue/saturation but that still leaves me with the horrible plaid pattern.
View 3 Replies View RelatedI have 15 images that are shot on a white background and need to create a silo that has a transparent background but includes a natural shadow. I'd also like to create an action for it.
View 1 Replies View RelatedI would like to take the pic of sunglasses similar to
and put it into another background but still maintain that natural shadow that is there.
What is the best way to alter photos in PS Elements 11 that were taken with a vivid setting in camera? The colors are overly saturated and too bright.
View 17 Replies View RelatedIs it possible to make your own Natural (Media) Brushes and add them to your library?Anywhere a tutorial about this how to go about?And I assume that it should be possible to design your own symbols as well.
[URL]
I often work with Civil Engineers and I use line work from Civil programs such as 3D Civil and Bentley MX. These programs give me splines (see image 1). I trace over the lines to create poly surfaces which may end up being grass or concrete etc (see image 2)
I don't use the terrain command because the command is not always suitable. The lines I import often have gaps or other issues thats why I find it faster to trace over the lines to create my poly surfaces.
But if you look at image 2 it's very blocky. I would like to smooth between these surface to make the terrain look more natural. I have played with turbosmooth and meshsmooth but sometimes they screw up the surface or don't work at all.
How I could make my surfaces more natural and less blocky.
I obviously got far enough to add the images together and get the correct size. I just cant find any tutorials to show me how to make the layers blend and look more natural. I added a new background to an image and I want it to look like it belongs there:
[URL]
I have a photo of a yellow car that I want to use but the hood is black. I used the ink dropper on the color pallet and then painted over the hood, but it's dull. The color is right but you can tell that it's not natural. A way that I can add a "shine" to it to make it look more natural?
View 2 Replies View RelatedI do cartoons and I want to be able to use the pen tool, brush tool and/or even blob brush tool to draw. I'm trying to draw a straight line that has a varied stroke width, so it looks like it's drawn with a felt tip marker or maybe a pencil. The natural random/varied stroke width is what I'm looking for.
I see the "vaiable width profile" drop down box in the tool bar but I only see one option that looks like this (it says "width profile 2" when I mouse over it). Although this varies in width, it's too consistent and doesn't look natural at all. Is there a way to get a varied stroke width for straight lines? I have a pen talet and have tried pen pressure as well but I've not found an easy way to do this.
I was recently trying to find the normal depth in a natural channel to use as an outfall water surface elevation in SSA. I double checked the normal depth calculations using the Express Add-On in Civil 3D. I found that while the normal depths correlated closely for channels with a single roughness coefficient, they varied considerably if a composite roughness coefficient was used for the left and right overbanks. This leads me to believe that composite roughnesses are being calculated incorrectly in SSA. I would like to use SSA for floodplain analysis, but am unwilling to do so until I have confidence in the calculations.
View 2 Replies View RelatedI tried the following in Illustrator,
So basically, I created coloured text inside Adobe Illustrator and however much I zoom into the text, the text always appears to have smooth edges. Once I click on 'Save For Web', the edge all around the text becomes rough and aliased. I chose GIF and PNG, but it still happens. The text is on a transparency background. The same problem applies to images when I am creating a logo.
Well..i did'nt know where to put this. I want to recolour a wooden image but the colour overlaps its natural texture. Any solution for this?
View 3 Replies View RelatedMy question concenrs this photo: [URL] ... (this is my own photo by the way). Just so you know what I mean with 'sky' later on: you're looking at balconies.
I want to extend it on the left so I can make it a desktop wallpaper. However, the original photo does not extend far enough to allow me to just crop differently. How can I, using GIMP, fill up the new space so that it looks like the sky that's already there?
I have GIMP for Mac version 2.8.3.
I thought this was going to be a piece of cake in the new Illustrator CC but I am having a few unanticipated issues:)I need to create some vector tire images with different edges, such as the top one in the image below.So I thought this would be SO easy by simply creating a pattern brush in Illustrator and then using that for the outside. So I created the shape you see in the middle image below and created a pattern brush with this shape.I then created an ellipse and used the new brush for the outline.
All of those are open paths...it has taken the shape and applied it to the outline but has kept each shape separate, so I am not able to fill the circle in black. I could of course go in and manually join each little corner separately where the little shapes meet but this will take FOREVER with all the images I have to do.
I'm trying to snap a head with it's neck with the merge edge tool, but somewhere along the way, the edges lost there border edge characteristics and now I can't merge the edges. Is there a way to make the edges back to the way they were?
View 1 Replies View RelatedI have been continually annoyed, when creating a vector mask-heavy document, with trying to select vector mask points by dragging a rectangle only to find that it instead selects a layer higher up which has a larger vector mask.
The only workaround is to manually select the points of my mask or to drag a rectangle from outside the canvas, meaning I have to zoom out or scroll to the edge - sometimes annoying if I am zoomed in quite far.
I know that the move tool can be set to automatically select a layer, depending on what part of the image is clicked, but why is there not an option to turn this off for vector editing?
If you look closely in the attached picture, there is a spot of light blue on the player's helmet, that looks like a mistake (think it should look like the grass behind it)...though it actually may be part of his helmet.
Regardless, I'd like to take it out. My idea was to select the blue with the quick selection tool, then bring that selection out to the grass, select the grass with that size/shape of selection, copy/paste and then bring the grass selection into the blue part so it looks like grass in what was the blue part.
The problem is I don't seem to be able to move the selection without taking the blue with it (so it's not an empty selection and therefore can't select a piece of the grass.)
I have Photoshop CS5 on a Mac OS 10.7.4 My problem is that when I am using curves or a slider, my selection does not stay in the same place. For example, I chose the number 8 on a slider, after I release my selection it will either go one number after or before my selected number. I have had this problem since I got my computer, December 2011, but it has only recently started to frustrated me because of having to use Photoshop a little more than I usually do.
View 2 Replies View Relatedhow to "drop out" the background from this photo (I have loads to do which are very similar). Thus far I have tried channel selections and the calculations tool + all the normal quick selection tools and I just cant get it to work without spending hours adjusting things. The end effect I need to achieve is a perfect white background without loosing any of the detail if possible. On a side note I have also tried taking the photo on blue, green, black and white backgrounds but due to the number of colours present in the products its just not working for me.
View 5 Replies View Related