I'm comparing the memory settings of my new installation of CS4 with my old CS2, and note the following discrepancy (under Edit -> Preferences -> Memory/Performance):
Available RAM
CS4 2569 MB
CS2 2698 MB
CS4 is thus missing 129 MB of available RAM.
these values are indicators of available addressable memory space only, and have nothing to do with the RAM actually free or in use by Photoshop at that time. In that case, they should be the same for both CS4 and CS2, but they are not.
For those of you with both CS4 and any prior version of Photoshop still installed, do you see similar discrepancies?
I hope this is the right place to ask. I have had some people complain that there is often noise in many my photos. The problem is I am unable to see it myself. Maybe it is my poor vision. Mt question is, "Is there a way that a person can make the area of a phot that has noise in it stand out like in a highlite or something making it obvious where it needs removed?"
I am envisioning a software that makes all areas of the photo red where the noise is. I have the software tools that you use to remove it but first I need to be able to see it. If this is the wrong forum for this question, please direct me to where the right one is. Notice, I did not say, "Tell me where I can go?.
have Dell Precision M6400 with 12Gb of RAM and Photoshop CS4 (as a part of master collection). Here is my problem: Figure 1 (system spec showing my 12Gb of ram)Figure 2 (showing ps cs4 64bit system info read)Figure 3 (where did all my RAM GO? only 2963?)
When one opens an image via CS5's ACR, blown out regions are shown in red and there is a "recover" slider.  How do I turn on the blown out detection in CS6's ACR and can I turn on a "recover" slider.
I need software (free?) to detect the edges of my subject then crop to a certain distance from the subject. Any ideas? Time is of the absolute essence. Or better yet I need a way to select my subject then place it on a white background using an action.
I currently have a Lenovo X61T Tablet PC and I am testing out Photoshop CS4.When I try to set the brush to be pressure sensitive I get the little "!" icon displayed saying that I must have a tablet installed for this feature to work.I also have the FREE program of “Paint.net” installed on this tablet pc and that is able to detect the pressure sensitivity perfectly. So I would have thought this would rule out any driver issue as the functionality is working its just that Photoshop doesn’t seem to detect it and enable it.
In Illustrator CC every time I click Merge Paint I need to go back to Live Paint > Gap Options > and reset Gap Detections to "Paint stop at Small Gaps". Despite I set "Paint stop at Small Gaps" as my default many times now, it seems that Illustrator CCÂ does reset it automatically to "Custom Gaps" and therefore Merge Paint doesn't work correctly. A nightmare, I am forced to use Illustrator CS6!
Annoying time spend waiting while acad automatically detects hatch boundary? - usually a boundary of some sort, thats completely useless anyway.
I'm seeking full control and want to select the boundaries myself and hope some of you can tell how to switch off or avoid this automatic process of boundary detection that usually follows "h" ↵ ( "hatch" ↵ or "bhatch" ↵ ).
It seems to me at one time I was able to just click the check box "Enable Profile Corrections" and LR would automatically detect the lens I used and apply it. Now it wants me to scroll through the list to the bracnd name--then it applies it.
Im playing around with the 'recolor artwork' tool but cannot seem to find the colour group for my existing image [URL] ....  I thought there might have been a feature where cs6 lists the colours in the 'current colours' drop down list.  Yellow, pink and blue are the ones that have automatically appeared but i cant see my current colour group.  I vectorized this image from a jpeg and saved the vector as a PNG, then reopened it.
I want to have some kind of collision-detection within two symbols. So when one symbol collides with another there will appear be text like "squash" or something. Â I haven't found anything about collision-detecting in edge animate, but I thought I could handle it with looking for the same css-parameters of both symbols. Obj1 is moving to Obj2 on a motion path. Now I want to have a Text, when it reaches Obj2.So I tried it like this: Â var positionobj1 = sym.$("obj1").css("left"); var positionobj2 = sym.$("obj2").css("left"); Â if (positionobj1 == positionobj2){ sym.play("Text"); }
I would like to see if there is a routine that allows my iLogic code to detect if my assembly contains another assembly within it. If my assebly contains assemblies then I don't want "MyRule" to run. Else if it does then I want "MyRule" to run.
I'm running Photoshop Elements 5.0. Everything was working fine til this mornin. I've had the program for about a year now. When I tried to open it this morning I got this error message that popped up.
It says:
Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable.
I've tried repairing the program. That didn't work. Restarted my computer. That didn't work. Uninstalled the program and tried opening it again. That didn't work. I'm at a loss! I really need to get into my program b/c my work is there. I tried opening some of my files (they are located in my Pictures folder) and they pop up with the same message.
When I use the quick selection tool (or when I use content-aware scaling) I get an error message saying "could not complete your request because of a program error." I am working with NEF files, 4 GB of RAM, fast machine with plenty of scratch space, Radeon X1950 crossfire graphics card. With small .jpg files, the problem doesn't occur.
so i recently restored my computer back to factory settings .. so my computer doesnt even have any new downloaded app .. i download photoshop cs6 now im getting scratch disk errors ..which i dont see possible if my computer doesnt have anything on it (besides what it came with) my hard drive has 276 gb i only used 33 . i made an external hard drive and that has 8 gb ... also its moving very slow .. also its telling me i cant make an new canvas size 1920 x 1020 with an resloution of 300 .. im using windows 7 Toshiba
I have Photoshop 7 installed ands till recently it was running fine but from just day before yesterday I cannot use the filters. Whenever I try to use it it says "Cannot complete action due to error in Module Interface", I have also tried by reinstalling photshop but it doesnot work.
I am getting a Could not open due to unexpected end of file error messages on a bunch of jpg's I am receiving via email. The files open in Microsoft Office Picture Manager.
Ive been trying to install Adobe Photoshop CS4 trial for the past 3 days. The only reason I want to try it is because of its ability to create textures directly on models. But whenever I try to install, I get this error"Adobe Drive CS4Error:Error 1603. Fatal error during installation." Dispite it not saying that Adobe Photoshop CS4 having an error, I still get this screen ....
I have just installed Photoshop CS2 on my new win VISTA HOME machine. There was no problems, I got a notification of a large update from ADOBE,
so I accpeted, shut down Photoshop, installed updates and then when I re-boot my machine and opened up Photoshop again, I got this error message. "Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable"
I'm trying to create a digital layout in PSCS version 8.0, and when I go to save the psd file (very early stages of the creation...its not very large yet) I get an error that says "Unable to save (file name) because of a disc error". I've never seen this before and am trying not to panic, but I'm on a deadline! LOL And am running behind as usual!
I am using an older mac, and I'm pretty dang maxed out on Gb...gotta clean up some files, but having a hard time finding a free dup file finder for macs...so I'm procrastinating, basically. Could the fact that I've got very little Gb available left have something to do with this?
I try I open PhotoShop I get a message saying "Unable to conitnue because of a hardware or system error. Sorry, but this error is unrecoverable" then the program shuts down and I have to restart my computer in order to use PS again.
I have been re-saving many of my PSD files using CS3 image prosesssor with compatibility mode turned off. They have simply been saved again as PSD files into a different folder - no changes to the original PSD files. This has worked well and reduced file sizes by up to 50% (I had compatibility mode turned on previously).
of the 60 files I have processed, 3 will no longer open , I get a message that says "file will not open due to a program error."
these files have only ever been used in CS3. , they are quite large from just under 1GB to 1.5GB, however other similar large files have processed successfully. I have re-tried without success.
I still have the original files so no data loss is involved.
