I have just installed Photoshop CS2 on my new win VISTA HOME machine. There was no problems, I got a notification of a large update from ADOBE,
so I accpeted, shut down Photoshop, installed updates and then when I re-boot my machine and opened up Photoshop again, I got this error message. "Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable"
I'm running Photoshop Elements 5.0. Everything was working fine til this mornin. I've had the program for about a year now. When I tried to open it this morning I got this error message that popped up.
It says:
Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable.
I've tried repairing the program. That didn't work. Restarted my computer. That didn't work. Uninstalled the program and tried opening it again. That didn't work. I'm at a loss! I really need to get into my program b/c my work is there. I tried opening some of my files (they are located in my Pictures folder) and they pop up with the same message.
I am using PSE 9 and am running on a XP .
Â
When I open the editor , I get an error message " unable to continue because of a hardware or system error. sorry but this error is unrecoverable "
MY photoshop was working fine up until a week ago. Then get gave me this error message. "Unable to continue because of hardware or system error. Sorry, but this error is unrecoverable". The error pops up when photoshop is loading "building color convertion tables" or something to that effect. It is not the fonts becuase I have not installed any new fonts, have defraged my hardrive. I have used FontDoctor, and all my fonts are fine. The only thing that i did do is install the new directx june 2006, and the new NVIDIA drivers. I uninstalled my Nvidia drivers but problem still persists, please I am desparate for help, formating my hard drive is not an option. I have reset the prefs both via ctrl, atl and shift, and searching for the psp file and deleting it manually, same problem pops up. I installed Photoshop cs and I recieve the same error message. I can however run and use ImageReady.
View 1 Replies View RelatedI try I open PhotoShop I get a message saying "Unable to conitnue because of a hardware or system error. Sorry, but this error is unrecoverable" then the program shuts down and I have to restart my computer in order to use PS again.
View 7 Replies View RelatedThis evening I switched on and tried to load PS2.
The following pop-up appeared.
'An error has been detected with a required application library and the product cannot continue. Please re install the application.'
I've deleted CS2 and re installed but with no success, just the same error.
I get the following error message when trying to export a file from LR 4.1 using Windows 7:
 Unable to Export: An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute
I cannot open my cs2 all of a sudden. I get an error message "error has been detected and activation cannot continue".
View 2 Replies View RelatedI'm trying to create a digital layout in PSCS version 8.0, and when I go to save the psd file (very early stages of the creation...its not very large yet) I get an error that says "Unable to save (file name) because of a disc error". I've never seen this before and am trying not to panic, but I'm on a deadline! LOL And am running behind as usual!
I am using an older mac, and I'm pretty dang maxed out on Gb...gotta clean up some files, but having a hard time finding a free dup file finder for macs...so I'm procrastinating, basically. Could the fact that I've got very little Gb available left have something to do with this?
One of the users in my office is getting the "AutoCAD cannot continue" error in AutoCAD Architecture 2012. I've read a few of the discussions concerning this issue in earlier versions.
View 2 Replies View RelatedContinue to receive error message when trying to print. What is the problem? I have updated the latest Service Pack.
View 12 Replies View RelatedWhenever I try to open CS5 extended 32 (only, 64 bit opens fine) bit I get the above message and CS5 will not open. I have tried uninstalling and re-installing to no avail.Â
View 2 Replies View RelatedI get this message when I start PS. " There is no disk in the drive. insert a disk into the drivedriveharddiskdr2"...When I accept this message PS continues to load as normal, However
Â
If I try to save a file using "Save for Web and Devices" I get the same message as above but when I accept this message I get another message "The operation could not be completed. The System cannot find the path specified."All other functions of PS appear to work normally.
Â
I have a Quad 4 processor with 8gb Ram with Windows 7
Whenever i try to start Adobe Photoshop Album 2,0 i recieve this error and the program shuts down instantly. I dont get this error with any other program.
Â
I run Windows XP Professional.
over and over i keep hitting this wall when stitching my edges together while unwrapping - what this is or how to fix it?
View 2 Replies View RelatedNow no save for web operation completes due to an error "Could not complete this operation. An unknown operating system error has occured."NOTHING has changed on the system.
Â
I've trashed Photoshop pref... all of them.I've reinstalled the Mac OS 10.7.5 combo update.I've rebooted to a different drive and repaired disk and permissions (no issues found).I've Safe Booted.I've disabled ALL plug ins.
Â
Uninstalling and will reinstall/update to see if that works.
Â
Photoshop Extended 13.0.4, Mac OS 10.7.5, 8-Core 2012 MacPro 32GB RAM, SSD boot drive, separate internal dedicated scratch drive, nVida 5870 driving 3 monitors, Wacom Intuos 5
I am tryng to upgrade from LT 2009 to LT 2012 and recieve this message "annot update some system component now. Please reboot the machine and try again" We are running Windows Professional XP 2002 with SP3.
View 3 Replies View RelatedRecently I found that I couldn't import a .bip file onto my CAT rig. Here's the error message:
Unknown system exception
and highlights the following line of code:
local liindex = FindCATNode catNode;
I've tried several things and copy/pasting the error to google only gives a single page of results, with very few possible solutions. There was one saying I should replace the highlighted code with a different piece of code and restart max. this just changes the error message.
Another solution was to get max 2011 32 bit, save it there and open it up in 2012, however other posts had the exact same problem with importing 2011 files into 2012. so that also doesn't seem like a working solution.
That's about when I reached the end of the page... Could it be that importing the original BVH onto a biped and exporting the animation to .bip caused the .bip file to get corrupt or something? I've tried loading the BVH file onto my CAT rig directly, but this just crashed max.
Very often, but no always, when I save metadata in the file, appear an "not known error system" message
View 2 Replies View RelatedI have downloaded the trial version of Paintshop Pro Ultimate X5 three times ans still get the above cryptic error.I am running Windows 7 64bit.
View 1 Replies View RelatedAutoCAD 2010 civil 3D.
Main issue is frequent crashes of the AutoCAD software. Sometimes 10-12 time's in a day. Unfortunately their are no error messages, and I have yet to see any pattern in when and how it crashes.
The problems I can see are the workspace, and process memory of my system. The workspace does not load correctly. The Ribbon shows multiples of the every tab at least twice. All tabs show the commands but not the pictures associated with the commands. CUIload shows correct workspaces.Â
Second note is that my system runs the same .dwg file's at 2/3 the processing memory than any other identical systems I run AutoCAD on.
Third, through my digging and attempted solutions I found that the AcSignCore_.dll file was missing.
I have: re-installed 3D twice, updated graphics drivers on my system and run open close save hotfix as well as AutoCAD2010 update 2 for 64 bit system.
I have problem with Civil3d 2010, when i open heavy drawing or 1 or more drawing will struck out of system memmory cannot continu the drawing , how can i fix, i already install update package 1 & 2 my system config.,and error shown on attached file. a
View 5 Replies View RelatedHalfway installing PSP Prox4 from my disc or via the web, error message comes up: "The system can not find the device specified" and "Your system has not been modified".I have the latest drivers and DirectX installed.
View 2 Replies View RelatedNormally When I start interface and tagging items (drawings) and writting in to Database, everything is working fine. However my interface is idle for morethan 15 mins, after that if I start the process (Searching items, Creating Items, Writting Items into DB) then immediately I got the Error "Automation Error System call failed". I did lot of R & D on my code, but I am unable to find the issue, may be Objects are emptied or i don't know.
Problamatic Code is given below.
dim strAutoCadVersion as string
strAutoCadVersion = Left(AcadApplication.Version, 2) is giving Automation Error when the interface has been idle for 10 mins.
Also I attached screen shots of an error.
my CAD 2013 and Revit 2013 crashs in the open screen only..i use Windows 8 .CAD 2013 days an error saying 'The security system (softlock license manager) is not functioning or is improperly installed,.. I did try ticking the netframes from the windows on/off settings and still end up with a softlock error..
View 3 Replies View RelatedI've been using CS4 just fine for a long time. Suddenly when I try to open it I get an error dialog telling me that my licensing has expired. Error code 150:30. As far as I can tell, nothing has changed. I tried uninstall and then reinstall from original disk. No luck. Contacted Adobe Support. First they told me to remove the FlexNet Publisher preferences folder from my Library folder at root level. There is not such folder there. They then told me to modify permissions on one of the folders. Did that but still no success. Also tried repairing all disk permissions via Mac disk utility. Still no luck. Now they tell me that they can't/won't give further support because my version is too old (apparently only CS6 and CS5 qualify for support).
Â
I am running this on Mac OS 10.7.5.
Â
Only thing I have done that I can trace as a possible culprit was that I installed a new film scanner. As part of its software install it started to install a bundled copy of Photoshop Elements. I aborted that install. Subesequent to that I discovered I could not open my copy of CS4.
I just downloaded the trial version of Photoshop CC to try the new stuff (I was still on CS before).I deleted CS by dragging the "Adobe Photoshop CS" Folder to the trash and then I installed PSCC.But when I open the program, it says (French translation, may not be English accurate) : "Unable to launch Photoshop CC because of a program error".
Â
I looked up on forums that said to delete preferences or else, disk repair, uninstalling-reinstalling, but still, I get the same message again and again.Did I forget to delete a file to uninstall PSCS ?
I get the following message almost, but not every, time that I start Photoshop.
b This application has failed to start because vfzcore.dll was not found. Re-installing the application may fix this problem.
I have tried reinstalling Photoshop. But this does not help. I often also get a windows error after photoshop is closed saying that it did not shut down properly.
I suspect that the vfzcore.dll error is due to some 3rd party plug-in. But does anyone have any ideas? These error do not appear to affect the performance of photoshop that I can tell. Everything that I use works fine and it never bombs off (except after closing the program out). But having to hit "OK" at the error dialog every time the program starts up is annoying.
I have tried to export video out of CS3 extended no matter what I've tried a get the same message "Could not complete the render video command because of a program error"
I can import .avi and quick time files just fine but it won't export whether I choose .avi file or quicktime. (using only a 25mb sized file)
Please I really could use your help as I have not found any info thru google search. I have no problems rendering from After effects 3 or Premiere Pro 3 just photoshop.
windows XP pro SP3
Photoshop CS3 extended
4 gigs ram, ATI 2900 pro video card Asus PB5 deluxe CPU E8400
I'm running Vista Ultimate 64 bit Photoshop CS4 Extended and have come across a problem with the Automate/Fit Image script. I have read the other posts here concerning a bug in the script, but I'm not even getting to the stage of the script giving me any options to run - I just get the following in a Script Alert message box: Fit Image CS4: Error: Unable to create Window - OS error [1400]:210 I can see that the script is in the Presets/Scripts directory OK.
View 3 Replies View RelatedUsually when I bring up Elements 10, it says welcome back Kenny,now when I type in my password it is showing Error 400. I have tried several times to create a new ID.....no luck. It just started doind this last night. What do I need to do?
View 3 Replies View Related