have Dell Precision M6400 with 12Gb of RAM and Photoshop CS4 (as a part of master collection).Here is my problem:Figure 1 (system spec showing my 12Gb of ram)Figure 2 (showing ps cs4 64bit system info read)Figure 3 (where did all my RAM GO? only 2963?)
View 5 Replies
Just installed CS6 on my new workstation and Photoshop; it freezes upon opening.Every other program I have installed has worked flawlessly, including the rest of the CS6 Suite and Lightroom 5.Both Windows and the Adobe Suite have all available updates already installed.Computer is a new HP Z420 Xeon Workstation, Windows 7 Pro 64bit, 16GB Ram.
View 15 Replies View RelatedIn Photoshop CS6 (64bit), when using the brush tool (with a brush with pressure sensitivity activated), I quite often get a line drawn at the max width selected, as if there was no pressure sensitivity. Everything goes back to normal after I start drawing another line, and happens again after a few lines. It's quite random.
I don't have this problem in any other software (Illustrator CS6 64bit, Painter XII, Sketchbook Pro, Zbrush, ...). I have already checked and I've found some other users on other forums with the same problem.
One example, with a picture of the problem: [URL] Another one, exact same problem: [URL] Some of those users seem to have solved their problem by installing an old driver (6.1.5r3), but they had that problem with Intuos TABLETS in the first place, not a Cintiq 24HD... I have tried that, but unfortunately the driver is not compatible with the Cintiq 24HD.
To test this out: I've been able to reproduce the problem 90% of the times I've tried. if I keep the pen at 1 inch from the display so that it's still recognized by the screen but it's not drawing, then wiggle it a bit, and then I slowly move to the screen and tap it (as if I was starting a line with very low pressure), the problem appears and it makes a large dot, as if there was no pressure sensitivity. As I said the test doesn't work every time, but almost.
This is an image of what happens when I try and make dots in Photoshop. These are done trying to push the pen with the same (low) pressure. The big ones are from when the issue appears: [URL]
I have tried the pressure test in the Wacom utility software and it seems to work fine, it never jump to full even when I try the method I've just described. In the diagnostic page of the Wacom utility software the pressure is always correct, even when in Photoshop there's the brush sensitivity issue.
note: I've already tried to completely re-install my computer + the Adobe software + the lastest wacom driver for my Cintiq 24HD, and the problem is still the same.
Both Photoshop CS5 (64 Bit) and Premiere Pro (64 Bit) Crash on Start up. 32 bit version of Photoshop works fine.
Here is the problem signature when they crash.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 12.0.0.0
Application Timestamp: 4bbc5b10
Fault Module Name: CoolType.dll
Fault Module Version: 5.7.82.7602
Fault Module Timestamp: 4b980c97
[code]....
Both are referencing cooltype.dll. I ran Font Doctor on all system and non-system fonts and found no errors. Booted without Extensis Suitcase loading. Nothing works. All 32 bit programs work fine.
I'm comparing the memory settings of my new installation of CS4 with my old CS2, and note the following discrepancy (under Edit -> Preferences -> Memory/Performance):
Available RAM
CS4 2569 MB
CS2 2698 MB
CS4 is thus missing 129 MB of available RAM.
these values are indicators of available addressable memory space only, and have nothing to do with the RAM actually free or in use by Photoshop at that time. In that case, they should be the same for both CS4 and CS2, but they are not.
For those of you with both CS4 and any prior version of Photoshop still installed, do you see similar discrepancies?
I hope this is the right place to ask. I have had some people complain that there is often noise in many my photos. The problem is I am unable to see it myself. Maybe it is my poor vision. Mt question is, "Is there a way that a person can make the area of a phot that has noise in it stand out like in a highlite or something making it obvious where it needs removed?"
I am envisioning a software that makes all areas of the photo red where the noise is. I have the software tools that you use to remove it but first I need to be able to see it. If this is the wrong forum for this question, please direct me to where the right one is. Notice, I did not say, "Tell me where I can go?.
When one opens an image via CS5's ACR, blown out regions are shown in red and there is a "recover" slider. How do I turn on the blown out detection in CS6's ACR and can I turn on a "recover" slider.
View 7 Replies View RelatedI need software (free?) to detect the edges of my subject then crop to a certain distance from the subject. Any ideas? Time is of the absolute essence. Or better yet I need a way to select my subject then place it on a white background using an action.
I use Photoshop CS3 extended on Vista.
I currently have a Lenovo X61T Tablet PC and I am testing out Photoshop CS4.When I try to set the brush to be pressure sensitive I get the little "!" icon displayed saying that I must have a tablet installed for this feature to work.I also have the FREE program of “Paint.net” installed on this tablet pc and that is able to detect the pressure sensitivity perfectly. So I would have thought this would rule out any driver issue as the functionality is working its just that Photoshop doesn’t seem to detect it and enable it.
View 1 Replies View RelatedI am having trouble hatching an object using the island detection feature to accent an object within the main hatch pattern. I am using R14.
View 2 Replies View RelatedIn Illustrator CC every time I click Merge Paint I need to go back to Live Paint > Gap Options > and reset Gap Detections to "Paint stop at Small Gaps". Despite I set "Paint stop at Small Gaps" as my default many times now, it seems that Illustrator CC does reset it automatically to "Custom Gaps" and therefore Merge Paint doesn't work correctly. A nightmare, I am forced to use Illustrator CS6!
View 18 Replies View RelatedAnnoying time spend waiting while acad automatically detects hatch boundary? - usually a boundary of some sort, thats completely useless anyway.
I'm seeking full control and want to select the boundaries myself and hope some of you can tell how to switch off or avoid this automatic process of boundary detection that usually follows "h" ↵ ( "hatch" ↵ or "bhatch" ↵ ).
It seems to me at one time I was able to just click the check box "Enable Profile Corrections" and LR would automatically detect the lens I used and apply it. Now it wants me to scroll through the list to the bracnd name--then it applies it.
View 5 Replies View RelatedIm playing around with the 'recolor artwork' tool but cannot seem to find the colour group for my existing image [URL] ....
I thought there might have been a feature where cs6 lists the colours in the 'current colours' drop down list.
Yellow, pink and blue are the ones that have automatically appeared but i cant see my current colour group.
I vectorized this image from a jpeg and saved the vector as a PNG, then reopened it.
I want to have some kind of collision-detection within two symbols. So when one symbol collides with another there will appear be text like "squash" or something.
I haven't found anything about collision-detecting in edge animate, but I thought I could handle it with looking for the same css-parameters of both symbols. Obj1 is moving to Obj2 on a motion path. Now I want to have a Text, when it reaches Obj2.So I tried it like this:
var positionobj1 = sym.$("obj1").css("left");
var positionobj2 = sym.$("obj2").css("left");
if (positionobj1 == positionobj2){
sym.play("Text");
}
GIMP script/plugin for detection of object boundaries in a raster image and automatic creation of corresponding paths?
View 2 Replies View RelatedI would like to see if there is a routine that allows my iLogic code to detect if my assembly contains another assembly within it. If my assebly contains assemblies then I don't want "MyRule" to run. Else if it does then I want "MyRule" to run.
View 4 Replies View RelatedI currently have a copy of Photoshop CS4 running on my desk top (ordered this online so I don't have a disk). My desktop has the 32 bit version of Windows Vista. I also have a new laptop running the 64 bit version of Vista - with 4G of memory. I wanted to install CS4 on my laptop so I downloaded the trial version and then entered the serial number from my licensed copy to the version on my new laptop.
So, this is where the confustion lies, when I open my new laptop version it asks if I want to upgrade to the extended version - I don't - but it has a green check mark by my license number so it seems to be o.k. But, when I open the application it has 3D in the top bar. What is going on? I don't want the extended version but would like to take advantage of all the memory on my Vista 64bit system.
I don't see PhotoshopCS4 mentioned as certified for Win XP Pro 64bit !
Now seeing that 64bit gets you more than 4Gb RAM and thats a good thing for Photoshop, is anyone using any version of Photoshop on 64bit XP pro and is it ok ?
What version are you with ?
There is no tech support if you run it on 64bit. As 64bit Pro and Photoshop are two 'professional' things to have, I am at a loss to know why Adobe have ignored 64bit Pro users.
...and before someone suggests I get Vista 64, where Adobe have looked at 64bit function, its not an option as my serious 3D CAD program company warn me against it, its resource hungry and not good for such progs, this after testing. Also it would be the death for progs I use that are XP ok and not supported under Vista.
I have an 8Gb PC and wish to continue with Pshop.
CS4 and my 64bit system. I mostly work with files in the 1-2MB range, not large by any means. I will process 2 or 3 photos, and close them.. no problem. But every 3rd or 4th photo, when I open the file, or try to resize/crop it, I get the dreaded "not responding" message and end up waiting 30 seconds to a minutes for PS to come back alive. Obviously this is extremely disruptive to my workflow.I have gone so far as to wipe my system clean, but still experience the same problem. It is a fairly consistent issue that always happens when I process multiple photos. Anyone else experiencing similar problems? Is there some obvious solution I am missing?My specs are as follows..Intel iCore 7 2.66 Mhz9GB DDR3ATI Radeon 4850 512MBWindows Vista Ultimate 64-bitPS CS4 Extended (with 11.1 update)
View 5 Replies View Relatedwhen I insert a memory card, auto-play for Bridge isn't activated. It is for LR 64bit. So, I'm assuming that Bridge is not 64 bit.
View 12 Replies View RelatedI have a problem with CS4 under XP 64 bit. The 'Enable OpenGL Drawing' checkbox in the preferences is grayed out. I have a Radeon 4580 card which should work with CS4.
I recently had Vista 64bit installed and there was no problem there... OpenGL worked just fine in CS4, just as it should.
But I can't get it working in XP64. I've installed the latest drivers but still nothing.
*all* of my cs4 master suite works great - no issues on any app - except the 64bit version of photoshop... it wont launch at all - and yes i have the 11.0.1 update (adobe updater says everything is current and file properties verify new version on both 32 and 64bit exes) running as administrator doesnt help either. also problem occurs when win7 boots in safe mode.i'm running build 7100 of win7 64bit and have 6gig ram on an i7 system with a gtx 285 so i'd love to utilize the benefits of 64bit.... when i attempt to launch the 64bit exe i get an alert dialog error saying "The application was unable to start correctly (0xc000007b). Click OK to close the application." and that's it. never makes it to the splash screen or begins loading any dll, it's immediate error.... and like i said, 32bit version works finefrom doing cursory google searches and whatnot, i am led to believe it may be a memory addressing issue which i've been unable to investigate or that perhaps my .net framework was out of date? but i checked the framework issue and win7 includes the newest version...
View 16 Replies View RelatedI have been experiencing constant crashes in Windows XP 64 bit. Photoshop loads but crashes when I open a file. I am using the Master collection and the other software runs with no problem. I have tried repairing the software repairing windows, reinstalling Photoshop reinstalling the Master collection. Reformatting the drive and doing a complete clean install of Windows and the Master collection. Updating all the drivers. Nothing helps, Photoshop works for a while but then crashes for no apparent reason. There is practically no other software installed apart from 3DS Max. If I transfer the licence to a 32 bit machine I have no problem. It even runs well on a Mac under Bootcamp. The machine in question is a standard HP xw8400 with a NVIDA Quadro FX 1500 video card, 4GB RAM and 2T HD space.
View 5 Replies View RelatedI buying a new PC and want to have Avista 64 bit (or Windows XP Prof 64 bit) so I can use the power of the 6-9 Gb memory.Before I buy CS4 I still want to use CS3.Is CS3 working with Vista 64bit even though it can not fully use the 64 bit advantage? (will it run normally or will it be instable, crach, don't work properly)Have anyone experincy of Vista 64bit or Windows XP prof 64 bit version with PS3, Lightroom 2 and Premier Pro if it works well, if there are things to consider before I but it.Is the CS4 with Vista 64 bit much better in performance than with CS3 and Vista 64 bit so it is worth wile to buy CS4?Do anyone tried Windows 7 with CS3 or CS4? Did it work?
View 6 Replies View RelatedI work with large (5B to 15GB) .PSB files (large panoramas). The good news is that I can read one of the PSB files in a couple of minutes (drives the disks full out). Also, photoshop operations although not fast are reasonable. The bad news: Writing a file to disk takes 6 to 10 hours, occassionally 18 hours. During this time, disk IO is nearly non existent, cpu utilization is less than 1%. I have upped the priority of PS to 'high' and it makes no difference. It makes no difference if whether other programs are running, or it is the only program.I have 16GB of memory, a couple of TB of swap disk space, and about 500GB of free destination space (disk are defragmented)
View 3 Replies View RelatedI have tried to update everything is current.
I tried to open jpeg-gif-png and PSD nothing will open.
tried creating new file and the new box wont show.
My Photoshop 6 (64bit) starts but will not open an image and just hangs, you can't even shut it down.
I have uninstalled and reinstalled (with all updates) Photoshop 6 completely and they same thing happens. Photoshop 32bit works perfectly so I know it isn't the computer.
i'm getting the error shown in subject. view details indicates problem with cooltype.dll. error started immediately after i activated a font in suitcase fusion 3. i was able to run photoshop 32bit to finish job. i deactivated font in suitcase and restarted computer. suitcase is not running but i still cannot run photoshop. what can i do to fix??
View 3 Replies View RelatedI work as a graphic designer and illustrator. As such, most of what I do with Photoshop is drawing, using my Wacom tablet and the brush. So I purchased the cloud services a few days ago to be up to speed and have the newest updates and everything.But when I started working with CS6 64bit I noticed how after some minutes working on a file there's just an INCREDIBLE lag on the brush. (usually if I beforehand do several zooms in and out and skip through the history) But I don't mean a little lag, like if I use a special brush with special attributes and it's really huge. I use the standart round brush, not even that big in diameter, (5px) draw, and have to wait several seconds for a simple line to materialize.It's like working in slow motion.
I tried drawing without the tablet to make sure it's got nothing to do with the Wacom Plugin, but no. Even if I use the mouse, it's like this.
It doesn't matter if I restart the system and photoshop just before. Some files I open, and it's lagtime.So now I have to use PS CS6 32bit, because there it's possible to work without the lag. But for some reason the programm crashes from time to time.
These are my systems specifics:
Intel Xeon CPU E31225
3.10GHz 3.10 GHz
8 GB RAM
64 Bit System
I am trying to install Photoshop CS6 on my Windows 8 64-bit PC. While in the loader option I chose both 64 and 32 bit installations, I only get 64-bit to install and work properly, and the Program Files (x86) protoshop cs6 folder stays empty.
I tried to reinstall 32-bit alone, uninstall and full reinstall, I also checked for security permissions in Program files (x86)/Adobe and in Common files which seem OK, Administrators, Creator Owner and System have the desired Full control permissions and finally I apllied the latest adobe_creative_suite_cleaner_tool fix on all products and tried reinstall, to no avail.
The error I always get upon finishing installation is the below:
Exit Code: 6 see specific errors and warnings below for troubleshooting. For example, ERROR: DF024, DW063 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 14 error(s), 0 warning(s)
----------- Payload: {83463106-DD1C-4FE5-A61C-DF6715472AD4} Adobe Extension Manager CS6 6.0.0.0 -----------
ERROR: DF024: Unable to move file at "C:Program Files (x86)Common FilesAdobeInstallersadobeTemp{83463106-DD1C-4FE5-A61C-DF6715472AD 4}\_90_f004805aa933f587236382b1bac3bac1" to "C:Program Files (x86)Common FilesAdobeHelpCfgen_USExtensionManager.helpcfg" Error 5 Access is denied.(Seq 117)
ERROR: DW063: Command ARKMoveFileCommand failed.(Seq 117)
[code]....
