Photoshop :: Error :: Owl Orphanage: Photoshop.exe Bad Image
Mar 12, 2009
I am hoping someone can help me out with this problem!
I have Adobe CS4 with Photoshop v11.0.1 loaded on a Dell Optiplex 755 running WinXP Pro SP3 with 2.66 GHz, 3.25 GB of RAM, 150 GB hard drive. It has been running without issue for a few months now.
Yesterday, when trying to open PS, I had a string of error messages pop up in succession immediately after the "Welcome" screen appeared. As I clicked "OK" (the only option I had) on one, another would appear. This happened NINE times! And, it continues to happen each time I open Photoshop now.
The error reads:
Owl Orphanage: Photoshop.exe Bad Image
The application or DLL C:Program FilesAdobeAdobe Photoshop CS4Plugins [add below here] is not a valid Windows Image. Please check this against your installation diskette.
Where the [add below here] is located in the above message, each of the following items comes up (in the order they are listed below) minus the ellipsis at the beginning.
Alias.8BI
Bigger Tiles.8BX
ElectricImage.8BI
HSBHSL.8BF
JPEG2000.8BI
RLA.8BI
SGIRGB8BI
SoftImage.8BI
Texture Fill.8BF
I am baffled, confused, and frustrated! I haven't used Photoshop extensively since this began so I don't know if it is causing other problems within the program or not.
Anyone with ideas? Any suggestions?
View 10 Replies
ADVERTISEMENT
Oct 27, 2012
Whenever I try to open CS5 extended 32 (only, 64 bit opens fine) bit I get the above message and CS5 will not open. I have tried uninstalling and re-installing to no avail.Â
View 2 Replies
View Related
Sep 13, 2013
I am currently a Photoshop CC user, but I opened My Photoshop CS5, and I get this error message.Owl Orphanage: Photoshop.exe-System Error
View 8 Replies
View Related
Jan 10, 2009
I have Vista Home Premium, 32 bit. I've downloaded the trial version of Photoshop CS4 (I'm a first-time user of this program), but on opening it I always receive an 'Owl Orphanage' message (in Italian; I have the Italian version of Vista) telling me that it is impossible to find the file M2000Twn.dll. Photoshop nevertheless opens, but this message is annoying. Is there any way to stop it from appearing. I've done a search, and the driver M2000Twn.dll is in fact present on my computer.
View 6 Replies
View Related
Dec 5, 2008
I have just installed PSCS4. The first time or two it launched without a hitch.
Now when I launch it I get two messages before it is apparently stable. The first message is: "Owl Orphanage: Photoshop.exe unable to locate command. This application failed to start because CoreFoundation.dll was not found. Reinstalling the application may fix this problem." Click OK to acknowledge this message three times and the following message appears. "Could not load MMX Core Routines module because it does not work with this version of Photoshop." Acknowledge this message once and Photoshop CS4 loads apparently OK.
I reran the installation and still get the same messages.
I am running WindowsXPSP3 on an Intel Core2Duo. Photoshop CS3 is also installed on this machine.
View 3 Replies
View Related
Jun 6, 2013
so i recently restored my computer back to factory settings .. so my computer doesnt even have any new downloaded app .. i download photoshop cs6 now im getting scratch disk errors ..which i dont see possible if my computer doesnt have anything on it (besides what it came with) my hard drive has 276 gb i only used 33 . i made an external hard drive and that has 8 gb ... also its moving very slow .. also its telling me i cant make an new canvas size 1920 x 1020 with an resloution of 300 .. im using windows 7 Toshiba
View 3 Replies
View Related
Apr 28, 2012
I am trying to use Image Processor for the first time and I get an error that say's
Â
Server Interface Error "Step1Icon':375
View 2 Replies
View Related
Sep 26, 2013
Every time i try and open an image i get this error code....says, Adobe Photoshop CC has stopped responding, then it closes the program..
View 2 Replies
View Related
Apr 15, 2009
I'm running Vista Ultimate 64 bit Photoshop CS4 Extended and have come across a problem with the Automate/Fit Image script. I have read the other posts here concerning a bug in the script, but I'm not even getting to the stage of the script giving me any options to run - I just get the following in a Script Alert message box: Fit Image CS4: Error: Unable to create Window - OS error [1400]:210 I can see that the script is in the Presets/Scripts directory OK.
View 3 Replies
View Related
Sep 19, 2007
OS Vista
Photoshop CS3
Photoshop CS3 was all working so well until it stopped opening PSD format files that I had previously created.
I can open a JPG file but not a PSD file.
When I open a PSD file I get a messgae box "Could not complete your request because of a Program Error"
If I create a NEW USER ACCOUNT in widows VISTA, photoshop opens the same PSD files correctly.
Therefore there must be something wrong with files associated with MY windows user account.
I have looked at, and compared, user account files associated with Photoshop, even tried replacing the photoshop related files in my user account with those from the new user account.
View 3 Replies
View Related
Aug 22, 2012
When I am trying to straighten an image with the ruler tool, I keep receiving the following error:
Â
Error 8800: General Photoshop error occurred. This functionality may not be available in this version of Photoshop.
- The command "Set" is not currently available.Line: 254->Â app.activeDocument.activeLayer.isBackgroundLayer = false;
Â
I don't understand why this isn't working because I have used this feature before.
View 7 Replies
View Related
Jun 30, 2013
I am getting triple images on the work area from tool icons such as the crop tool, hands, etc. How do I get back to single image. I have reinstalled CS4 and windows 7 but have the same problem.
View 3 Replies
View Related
Jun 12, 2013
When using Image Processor on Photoshop CS5, what does the following error message mean and how can I fix this issue? ReferenceError: Window does not have a constructor : 327
View 1 Replies
View Related
Nov 2, 2008
When I use the image processor in PSCS4 to process a large number of raw files using ACR 5.1 (Nikon D3 NEFs), I consistently receive an error message after about 10-11 files have been processed that the instruction at 0x696336ab tried to read memory at 0x6C (or thereabouts) and the memory could not be read. I am saving as JPEGs with the color space set to sRGB.
I de-installed and reinstalled PSCS4, but the error persists. The image processor worked fine with PSCS3. A workaround that solves the problem is to process the files as a batch using a simple action to accomplish the task.
I am running Windows XP Pro Service Pack 3 with a dual Xeon processor and 2G of error correcting memory.
View 2 Replies
View Related
Jul 23, 2013
I have PSE 8, PS Premier 8 and LR 4 insta;lled and haven't had any problems with them. Yesterday I tried to open PSE 8 and received a 'Bad Image' message that stated
Â
"C:Program Files (x86)AdobeElements Organizer 8.0amtlib.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.'
Â
However, I went to My Pictures, selected a file that I had edited in PSE 8 a few weks ago, right clicked on Open With PSE 8 Editor and there it was. When I right clicked on Open With PSE 8 Organizer, I got the same error message as shown above. I also tried openiong Organmizer through Editor ald also got the same error shown above.
Â
How do I resolve this? I'm running WIN 7 Pro, DELL XPS 8300.
View 3 Replies
View Related
Jun 16, 2008
I'm running Photoshop Elements 5.0. Everything was working fine til this mornin. I've had the program for about a year now. When I tried to open it this morning I got this error message that popped up.
It says:
Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable.
I've tried repairing the program. That didn't work. Restarted my computer. That didn't work. Uninstalled the program and tried opening it again. That didn't work. I'm at a loss! I really need to get into my program b/c my work is there. I tried opening some of my files (they are located in my Pictures folder) and they pop up with the same message.
View 3 Replies
View Related
Jun 26, 2013
I've installed PS CC and have an AMD Radeon HD 7970M card in my laptop. PS detects the card in Preferences and I'm able to choose it for acceleration (i.e. OpenCL, etc.).
Â
When I try and go Filter -> Liquify on any image, the Liquify dialog pops up, but i don't see the image. All I see is a black in the dialog.
Â
When I turn off acceleration, and go to Liquify, it works.
View 1 Replies
View Related
Sep 29, 2012
Trying to import images from my camera - Canon T3i. Using both the SD card plugged into a reader and camera with full battery plugged in USB gets the error "Cannot obtain all files from this device. Please ensure that the devices is connected properly, or that the battery is charged. The files that have been obtained till now will be sent to Elements Organizer." All updates installed, running on Vista x64, Elements 10.
View 3 Replies
View Related
Feb 17, 2009
i used photoshop everything was fine. and then all of a sudden none of my custom actions work with a batch process. a message keeps coming up saying
"the command "image size" is not currently available"
If i click continue it pops right back up saying the same but for the next process and again and again with every process in my action.
It does this on any photo and with any custom action i have saved
Interestingly if i just open the photo and click play on the action without going through the batch process... it works fine.. so its nothing wrong with my actual action.
Has there been a bug introduced with a live update along the way?
as i regularly batch process 100s of photos for the web and now im having to do them 1 by 1!
View 1 Replies
View Related
Aug 25, 2013
I installed VideoStudio Pro X6 and service pack 1.Always then trying to insert an image I get an error message, wrong format, copy-protected or to less space, even if I try to insert one of the samples or VideoStudio created snapshot.The same error message appears then I make a snapshot but the file was created.
All the samples are linked to c:program filescorel ... instead of c:program files (x86)corel ... this is the default folder on 64-bit-systems.
Relinking is not possible.I registered the product but Corel did not send the support code!
View 1 Replies
View Related
Jul 26, 2013
I'm using Maya 2013, and any time when I would like to import an image to my workspace, an error show up on the bottom right corner:
# Error: file: E:/Games/Autodesk/Maya2013/scripts/others/fromNativePath.mel line 90: (unicode error) 'ascii' codec can't encode character u'xf3' in position 29: ordinal not in range(128)
#
file -i "C:/Documents and Settings/Maródi Marcell/Asztal/iron_pickaxe.png"Â
View 1 Replies
View Related
Apr 26, 2008
This evening I switched on and tried to load PS2.
The following pop-up appeared.
'An error has been detected with a required application library and the product cannot continue. Please re install the application.'
I've deleted CS2 and re installed but with no success, just the same error.
View 16 Replies
View Related
Feb 25, 2009
When I use the quick selection tool (or when I use content-aware scaling) I get an error message saying "could not complete your request because of a program error." I am working with NEF files, 4 GB of RAM, fast machine with plenty of scratch space, Radeon X1950 crossfire graphics card. With small .jpg files, the problem doesn't occur.
View 4 Replies
View Related
Jan 6, 2013
In Elements 9 I now get an error message "Cannot use Clone Stamp due to program error".
View 1 Replies
View Related
May 11, 2004
I have Photoshop 7 installed ands till recently it was running fine but from just day before yesterday I cannot use the filters. Whenever I try to use it it says "Cannot complete action due to error in Module Interface", I have also tried by reinstalling photshop but it doesnot work.
View 2 Replies
View Related
Feb 25, 2008
I am getting a Could not open due to unexpected end of file error messages on a bunch of jpg's I am receiving via email. The files open in Microsoft Office Picture Manager.
View 2 Replies
View Related
Aug 1, 2009
Ive been trying to install Adobe Photoshop CS4 trial for the past 3 days. The only reason I want to try it is because of its ability to create textures directly on models. But whenever I try to install, I get this error"Adobe Drive CS4Error:Error 1603. Fatal error during installation." Dispite it not saying that Adobe Photoshop CS4 having an error, I still get this screen ....
View 5 Replies
View Related
May 22, 2009
I have just installed Photoshop CS2 on my new win VISTA HOME machine. There was no problems, I got a notification of a large update from ADOBE,
so I accpeted, shut down Photoshop, installed updates and then when I re-boot my machine and opened up Photoshop again, I got this error message. "Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable"
View 8 Replies
View Related
May 7, 2007
I'm trying to create a digital layout in PSCS version 8.0, and when I go to save the psd file (very early stages of the creation...its not very large yet) I get an error that says "Unable to save (file name) because of a disc error". I've never seen this before and am trying not to panic, but I'm on a deadline! LOL And am running behind as usual!
I am using an older mac, and I'm pretty dang maxed out on Gb...gotta clean up some files, but having a hard time finding a free dup file finder for macs...so I'm procrastinating, basically. Could the fact that I've got very little Gb available left have something to do with this?
View 9 Replies
View Related
Feb 10, 2009
I tried using the cloud tool and I got this error:
"Could not complete the clouds command because of program error."
I tried resetting the computer and still nothing.
View 2 Replies
View Related
Sep 3, 2004
I try I open PhotoShop I get a message saying "Unable to conitnue because of a hardware or system error. Sorry, but this error is unrecoverable" then the program shuts down and I have to restart my computer in order to use PS again.
View 7 Replies
View Related
