Photoshop :: Error :: The Command "image Size" Is Not Currently Available
Feb 17, 2009
i used photoshop everything was fine. and then all of a sudden none of my custom actions work with a batch process. a message keeps coming up saying
"the command "image size" is not currently available"
If i click continue it pops right back up saying the same but for the next process and again and again with every process in my action.
It does this on any photo and with any custom action i have saved
Interestingly if i just open the photo and click play on the action without going through the batch process... it works fine.. so its nothing wrong with my actual action.
Has there been a bug introduced with a live update along the way?
as i regularly batch process 100s of photos for the web and now im having to do them 1 by 1!
View 1 Replies
ADVERTISEMENT
Feb 10, 2009
I tried using the cloud tool and I got this error:
"Could not complete the clouds command because of program error."
I tried resetting the computer and still nothing.
View 2 Replies
View Related
Mar 15, 2013
I am UNABLE to follow a tutorial on how to make a repeatable pattern using 'texture transfer' on some fire I want to make into a pattern!!! every time I select the area I want to use and the 'input map' and paste as new image and I tell Resynthesizer to use that image it ALWAYS errors out as "The Input Map Should Be The Same Size As The Input Texture Image" according to the tutorial another person gave me on this forum he said NOTHING about being the same size!!! in fact, his selection was SMALLER than the actual image that he was using Resynthesizer on!!!
View 4 Replies
View Related
Jul 28, 2012
Sometimes in CS6 the delete command just acts as a non-optional "clear" command, and does not show a menu providing the content aware option. Sometimes this cures itself by closing and reopening the program. Sometimes not.
Â
How do I get rid of this defect in the program?
View 1 Replies
View Related
Jul 23, 2013
Bug in photoshop creative cloud. When using the "batch" editing feature after 5 images being edited the same way (batch processing) an error code pops up. "Error:not enough ram" and then i have to restart which does the same thing over and over again. Running a quad core i7 1tb hard drive 16gb of memory so there should be no error code. I have done everything from creating new scratch disks off of other hdd's allotting more ram to go to psd (since i can only use 3255mb because of a useless limiter on photoshop) to rebooting computer and nothing works at all.
View 3 Replies
View Related
Aug 28, 2007
i currently have a logo that is 460X440 pixels and 12.17cmsX11.69cms and the resolution is 96 pixels per inch.
i am wanting to change it into a 2cm X 2cm avatar that is less than 6K in size,
how do i do this? everything i try makes the output file about 24k in size.
the reason i am doing this is the forum i regularly post on has a max avatar size of 6k.
View 3 Replies
View Related
Jun 6, 2013
so i recently restored my computer back to factory settings .. so my computer doesnt even have any new downloaded app .. i download photoshop cs6 now im getting scratch disk errors ..which i dont see possible if my computer doesnt have anything on it (besides what it came with) my hard drive has 276 gb i only used 33 . i made an external hard drive and that has 8 gb ... also its moving very slow .. also its telling me i cant make an new canvas size 1920 x 1020 with an resloution of 300 .. im using windows 7 Toshiba
View 3 Replies
View Related
Feb 27, 2013
CS2 and Bridge will not make any pdfs'CS2 has been un-installed and re-installed twice from disc without solving problem. I will download CS2 from Adobe as my next step, however my CS2 disc would have to be de-activated and there is no activation server for CS2 anymore.{URL]...
System info:
Windows Vista
Intel CPU 2399 Mhz
Memory 4094MB
Â
bring back "pdf presentation"? Also, is there a way to upgrade the raw plugin folder to be able to read the current raw formats?
View 5 Replies
View Related
Oct 9, 2008
few days ago, when I clicked on "Save for Web" I received this error.
"Could not complete the Export command because of a program error."
This used to work fine before a few days ago. I haven't made any changes to my computer. I've deleted the Save for Web prefrences file as well as the Photoshop preference file. None of these have helped. I am still unable to Save for Web.
View 12 Replies
View Related
Sep 9, 2008
I've recently started getting an error message I've not noticed before. If I use CTRL L on an empty layer by mistake, I get the following message.
"could not complete the levels command because of a program error"
I can't swear that I've never had it before, and I'm sure I must have used CTRL L on an empty layer before, but I don't recall seeing it.
Whatever happens, it's not exactly a user-friendly message. A Google search turns up no matches, lots of similar ones, but I haven't found an answer yet.
Could I have messed up my installed files.
View 4 Replies
View Related
Sep 15, 2004
Getting a "Could not complete the Print command because of a disk error." (when trying to print in Adobe Photoshop 5.5, on a NT Workstation 4.0)
View 1 Replies
View Related
Aug 28, 2013
1. How do I connect, collapse and disconnect windows (tool bar, property manager, etc.)? They get stuck together and I can't unstick them. Â
2. What's the difference between canvas size and image size? Â
3. Which tools are only for web design (i.e. tools I can ignore if I'm not doing that)? Â
4. What's the subselection tool do? Â
For Photoshop: Â
1.Why is the original layer always locked?
2. Whats the name of the property inspector in PS? And is it called inspector or manager in FW?
View 6 Replies
View Related
Jan 9, 2003
I'm using Photoshop 7. I create a new document 8.5 x 11 inches at 150 pixels per inch.
I draw a circle 1" from the top of the image. The circle is 3" in radius.
When I print the circle is nearly .25" smaller in radius and slightly less than 1" from the top.
Why is the output not in the same placement and proportions as the image on the screen?
View 2 Replies
View Related
Nov 23, 2012
To recreate this error, draw 2 simple shapes in Illustrator CS6, copy and paste them together as a Shape layer in Photoshop CS6.
Then go to 3D > New 3D Extrusion from Selected Path. I just accept the defaults.
Then go to 3D > Split Extrusion.
The error is thrown at this point. No matter what I do, I can't get it to work.
Â
I've tried rasterizing the shape, but then I get a different error. When I select 3D > New 3D Extrusion from Selected Layer, I get the error: "Could not complete the New 3D Extruions from Selected Layer command because the path is too complex." This is ridiculous. I can't get the 3D to work at all.
View 2 Replies
View Related
Jun 20, 2012
Create a new document.
Add a new layer (you should now have a file with 2 layers)
Choose Select>Deselect Layers
Click on the QuickMask
paint within the mask with brush
Â
error:
Â
"could not complete the Brush Tool command because of a program error."
 Â
workaround - keep a layer selected.
View 9 Replies
View Related
Jan 9, 2014
I am using Photoshop Elements 9 and the "move" tool is not working. The Auto select layer box is checked and I have rebooted the computer and reset the move tool. I keep getting the error message "Could not complete the Move command because of a program error."
View 8 Replies
View Related
Dec 11, 2007
I am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.
View 1 Replies
View Related
Aug 11, 2013
In the new Image>Image Size dialog box, the preview is always at 100% which seems a bit disorienting.Is there a way to set that to default to "fit".
View 6 Replies
View Related
Mar 29, 2012
I have CS5.1 on a Macbook Pro.I have an incredibly frustrating problem.   I've seen similar questions, but not an answer that has resolved this for me. I have an image I have sized to fit an 8.5 x 11 inch paper. Canvas and image size all indicate my image is sized at 7.33 x 11 inches. It is at 300 dpi. Print size view indicates full space is utilized on either side….BUT…
Â
When I go to print, I click "scale to fit media" (which is an 8.5 x 11 paper sitting in printer) image prints smaller with a bar on one side. .
When I uncheck STFM,
I get:
scale - 92.67%,
[code]...
View 2 Replies
View Related
Jul 19, 2009
I have a created a new PSD that is 8 1/2 x 11.The canvas size is the same 8 1/2 x 11.I want to put a border around the picture (say 1/2 of an inch all around), and put the finished picture in a Picture frame. After it is in the frame, you would be able to see the entire picture plus the border. Q. Should I change (reduce image size) of the PSD to (for this example), 8 x 10 1/2.     Then increase the canvas size to 8 1/2 x 11. After I increased the canvas size, do a Paint Bucket fill with white (to create the White border)? then print the changed size PSD on 8 1/2 x 11 paper so that it will fit into a 8 1/2 x 11 picture frame I realize I could have just created the new PSD to be 8 x 10 1/2 in the first place.
View 5 Replies
View Related
Apr 29, 2009
 When I save a file to jpeg the image size in photoshop remains the same as it was as a tiff file BUT according to the information that comes up in windows properties the file is much smaller (300k vs 2.9mg).  Can you advise me which is the correct file size?  If the correct size is the one showing in windows (300K) does mean that the file compressed in JPG and lost a lot of information?
 and if this is the case how can I prevent that from happening and still save the file as a JPG?  [ I would like the image to remain the size photoshop shows it to be] . Thank you very much.
View 10 Replies
View Related
Jun 14, 2012
i tried to install 3ds max to my laptop so it can render while i do something else, but i have this mistake why?
DLL <c:program filesautodesk3ds max 2012stdplugshair.dlo>failed to initialize.Error code 8 - not enought storage is available to process this command
View 2 Replies
View Related
Jun 6, 2010
I'm attempting to print one file directly from AI, CS5. Only part of the file prints, the design part, not the text. Then the printer spits out another page with this message.Â
ERROR:Â undefined, OFFENDING COMMAND: C>Â STACK:Â 234.752.Â
This is an OKI C6150N, directly connected to PC via USB port. This file was origianally on Artboard 2. Artboard 1 (similar design) printed fine, Artboard 2 had the error. I created a new file with one Artboard, retyped the text, copied the design. Still same error while printing. If I save it to a PDF file, it prints fine from Acrobat. I recently upgraded to CS4, then CS5. I have never had this issue before.
View 5 Replies
View Related
Jul 23, 2013
Im on AE CC. If I try to command+drag a text layer I get an error that says "( 17 :: 45 ) After Effects error: unable to invert matrix. ( 17 :: 45 )" and the text jumps to some random location.Â
Â
What is this? I have never seen this and I have always used command to drag.
View 3 Replies
View Related
Oct 1, 2011
can a watermark stay the same size even when an image size is altered? say if its text and it gets too big when i enlarge the image how do i shrink the watermark ? when it is already merged and flattened as one picture without a separate layer.
such as a php or java script to keep the watermark distinct in a way even in a flattened pic or to select the watermark to erase it and re-apply it in the right font size back onto the resized pic?
View 5 Replies
View Related
Feb 22, 2006
Is there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies
View Related
Dec 6, 2012
Is there a method for changing the size inside the command?
View 9 Replies
View Related
Sep 23, 2011
My sculpt command seems to be temperamental. I've created some surfaces using the revolve command and now want to sculpt using those surfaces. It won't show me a preview of the section to be removed and as I keep trying I get bumped out of inventor (fatal error). The other strange part to this is that i t worked once before on one side of the part and not the other. And now that I try again on the part that worked; it won't work any more. ?
(Using R2010 service package 0)
View 1 Replies
View Related
Dec 4, 2012
I have a 3D polyline (blue in attached) for which I am trying to calculate the surface area. I use the area-->object command and get 1912342m2 in AutoCAD 2012. My colleague uses the same command in AutoCAD LT 2009 and gets 1807093m2. Due to the discrepancy, I roughly traced a polyline (yellow in attached) around the area in AutoCAD 2012 and I get approx. 1810000m2 so assumedly the AutoCAD LT 2009 version is giving the correct answer while my AutoCAD 2012 is not!Â
Why am I getting a different area for the polylines...is the difference is due to it being a 3D polyline? Is there a way I can ensure I obtain the correct area using the 3D polyline?
View 1 Replies
View Related
May 22, 2013
We have a lisp routine that I co-authored ages ago and then haven't done much programming in about 7 years. I seem to have forgotten much of my language skills. This portion of the lisp routine was running fine in autocad 2005 which is what the computer had on it, and it doesn't run on autocad 2010.Â
I've narrowed it down to the while statement which is why you see it commented out, but that portion is necessary.  My main question is was there a change in the language specifically the while statement between 2005 and 2010?Â
Â
; GET LINES OVER 10" AND THROW OUT (if (= (cdr(assoc 0 outerinfo)) "LWPOLYLINE") (progn (setq remlenouter 0.0) (setq numseg (cdr(assoc 90 outerinfo))) (setq edd (member(assoc 10 outerinfo) outerinfo)) (setq n1 0) ;(while (< n1 (- (* numseg 4) 4)) ;(setq dist (distance (cdr(nth n1 edd)) (cdr(nth (+ n1 4) edd)))) ;(if (>= dist edmmax) (setq remlenouter (+ remlenouter dist))) ;(setq n1 (+ n1 4)) ;) ; end while (setq dist (distance (cdr(nth n1 edd)) (cdr(nth 0 edd)))) (if (>= dist edmmax) (setq remlenouter (+ remlenouter dist))) ) ; end progn ) ; END IF
View 9 Replies
View Related
Oct 18, 2009
The loaded file is a .dll written in Visual Basic.NET using Visual Studio 2010.
NETLOAD Cannot load assembly. Error details: System.BadImageFormatException:
Could not load file or assembly 'file:///C:Documents and SettingsdanMy
DocumentsVisual Studio
10ProjectsClassLibrary1ClassLibrary1objx86ReleaseClassLibrary1.dll' or
one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded.
View 8 Replies
View Related
