I installed VideoStudio Pro X6 and service pack 1.Always then trying to insert an image I get an error message, wrong format, copy-protected or to less space, even if I try to insert one of the samples or VideoStudio created snapshot.The same error message appears then I make a snapshot but the file was created.
All the samples are linked to c:program filescorel ... instead of c:program files (x86)corel ... this is the default folder on 64-bit-systems.
Relinking is not possible.I registered the product but Corel did not send the support code!
New to using VBA with AutCAD. On my drawing I have to plot some line which I am able to plot using VBA. But when it comes to delete those lines, I have to do it manually. So gave a try to BLOCKS.
When I run the macro, I get following error -Run-time error - 2145320929(802100f)
I'd like to know if it's possible, and if so, how to do it..... in X5, to insert multiple images into their own single frames, at one time. Say I have images 1.jpg - 250.jpg, and I want all to be loaded into single frames... for an animation.
An Overlay track has a photo on the end of the track, there are also photos at the start of the track.
When right clicking on this track behind a photo at the start end of the track to insert a photo behind an existing photo, the new photo goes behind the photo at the end of the track.
Is there any way to use right click and insert the photo where you want it?
I could not find anything on this. Is it possible to insert a video clip into the middle of a project? I have tried inserting a video and it always adds it to the end of the project not where I want it to go.
I am putting together a biographical video of my wife and myself for our kids (married 50 years). I want to have a video of her (example) sitting and talking about growing up. Is there a way to insert a photo on the main video track and still keep the voice track intact? Example: She is talking about her childhood. A photo apears of her as a small girl while she is still talking. The photo goes away after a few seconds and there she is live and taliking. I hope to get away from using the overlay track.
Every time I attempt to insert a block with an attribute in it from my tool pallet I get the error FATAL ERROR: Unhandled Acess Violation Reading 0x0020 Exception at 4260af08u.Â
If I insert a block without attributes it works fine. I even tried building a block in 2013 and then inserting it from the toolpallet, still fatal error's out.Â
Inserting blocks from Design Center into model space causes the fatal error: access violation message to pop up.
This never happened in 2012, and I used it from day one.
My livelihood as a 2D drafting student depends on being able to use the blocks from DesignCenter, and now all of a sudden (I've been using 2013 since the day it released with no problems at all until about a week ago) it crashes every time I try to insert a block, regardless of which method I choose to insert with (i.e. right click insert or dragging into the model space window).Â
I'm on an Alienware M17x R3 running Windows 7 Home Premium with a Quad-core intel i7 processor, 16 GB of RAM, and an NVIDIA GTX 560M 1.5GB graphics chip.Â
I've tried system restore, program repair, clean uninstalls, and none of it fixes the problem. It seems that once the levee broke, so to speak, the bug is there to stay. Or perhaps more accurately, it was there the entire time and it was only a matter of time before it surfaced.
In either case, I would love, after having been a guinea pig, to see a patch issued for this if possible. Not being able to use the sample dynamic blocks is hell. Barring a patch sometime soon, I'm strongly leaning towards going back to 2012, which worked like a charm.
I downloaded the trial version of pro 4x and love the video clarity and smoothness....even running at 60FPS. However, when I try to start editing with the "Instant Project", I start to have issue.
1. The intro is fine.....very smooth
2. However, when it gets to the video portion, the quality and "shuddering" of the vidoe is horrible.
I've been unable to resolve a problem encountered when I insert a "title" to overlay on the first 30 seconds of a corresponding video clip.
When played back, the subsequent portion of the remaining video clip past 30 seconds goes missing. However, on this "missing portion" the audio portion of the video clip is present while the video portion becomes solid black to the end of the clip. The same result happens when I burn it.
In the "PROJECT" playback mode both the title and the video play fine, as do both the video and title in the "CLIP" mode.
I am using VideoStudio v11. I have a long section of video which is of someone making a speech. I want to insert some cut-aways into the sequence, whilst obviously retaining the audio running sequence.
I have split the audio from the video track, but I can't seem to figure out how to remove a section of the video and replace it exactly with a cut-away section of video. I need to keep the video and audio in sync. Maybe I am going about it wrong and don't need to split the audio off - but then how would I insert just a clip of video without disturbing the audio.
I have VideoStudio Pro X3 and when I try to insert movie clips I get a "File Mismatch" message. My clips are created from a smart phone - Samsung Fascinate - and are of .MP4 format.
how to insert a gif image file to my workspace? If it is in JPG format, I usually open that file and then open it and just drag and drop to my current workspace, but Photoshop doesn't allow me to do that for GIF format I did try to convert it to JPG but the image quality was decreasing even I tried with some programs and set the compression to 0 (zero). So I do want to just insert that GIF file into my current workspace.
I have just installed LT 13 and am trying to insert a jpeg as I have done so many times on previous versions of Autocad LT. why and how I can do this as it was previously through the insert command.
how to see that's half the battle here, trying to figure out how to ask theblasted question so someone can help me.....have one image open and insert another image over it. Like a large image and then a smaller image in a corner or in the center. Or how to make a collageof images.
Im trying to insert an image into 3Ds max. I selected my object I want it pasted onto, I then opened up my materials editor, under maps and then standard I selected Bitmap and selected my image. The image bitmap is showing up in the materials editor viewport but I cant apply it any objects (Assign material to selection icon is unavailable).
I mostly use Max for 3-D walkthroughs of architecture models I design in Revit, and in all of my renderings I have computer monitors and televisions. For effect I would like to make the monitors appear as though they are in use during the walk through, nothing fancy, just a standard home-screen would do.
Is it possible to insert .jpg or png screen-shot files in place on the monitor screens to make these objects look active, and how would I accomplish this task?
I am working on a drawing and my boss wants me to put the company logo in the corner of the picture. Im really struggling to do this. I've done some reading up on the net and read that i must covert it from JPEG to DXF then from DXF to DWG. Which i have done and inserted.. But, the picture looks nothing alike the logo as it is just lines, can insert it with the colours etc?
If not how can i plot my cad drawing and print the logo on the same page, to right hand side of my drawing forexample.
Don't know much about photo shopping or manipulating images, but hope to learn more, since I already have one Etsy shop (selling beauty products) and am planning on opening another (selling miniatures).
For my first Etsy shop I used a Free Etsy Banner provided by a blogger I follow. I did not include text or my shop name in my Banner.
I have downloaded another banner from this same blogger, this one has the option to include text (your shop name) and I would like to include my shop name for the miniatures Etsy shop I plan to open within about six month.
I asked her how to enter text and she said to just open it in Picture, or whichever photo shop type program I use. I have a Mac, am fairly broke, Gimp was recommended to me by another small business owner.
I managed to figure out how to enter text, use the text editor, and place it in the blank field. The only problem is I can't see the text, despite playing around with the colour of the text.
I am asking user for scale factor and insertion point. but the actual image always display width and height as the scale value, if i insert value of 5 for scale factor width and height will be 5 but not according to coordinates system.
 but if i insert the same image manually width and height are calculated by autocad according to scale factor before insertion.  double scale = promptDoubleResult.Value; var xAxis = new Vector3d(scale, 0, 0); var yAxis = new Vector3d(0, scale, 0); var ucs = document.Editor.CurrentUserCoordinateSystem; using (Transaction trans = database.TransactionManager.StartTransaction()) { RasterImageDef rasterImageDef = new RasterImageDef(); rasterImageDef.SourceFileName = imagePath; rasterImageDef.Load(); [code]......
I have a drawing that has an OLE image in the drawing format. In this particular drawing the image is not showing up. The border around the image is there but nothing else. All my layers are on and OLEHIDE is set to 0. Every other drawing I opened that uses the same format is fine.
I have attached the file with just the formats (my company is pretty strict with posting any drawings). The image should appear in the bottom left corner.
What is the AutoCAD command within AutoCAD 2013 for inserting image files produced in .JPG format as company logos onto an A1 drawing border for use in AutoCAD.
I am having trouble inserting a JPEG image in Inventor 2011 LT drawing (DWG) file. Â The Image button on Insert panel under Manage tab is always disabled. Â I am able to bring in the image using Insert Object feature and selecting 'create from file' option. Â Although the resulting image looks OK on the screen, it looks inverted and distorted when printed.
I am facing the same problem when I try to insert image in a dwg sketch, however, the process works as expected on part sketches.
I created an attribute of a title block, our company logo is inserted as a raster image within the attribute, I created this dwg file into a dwt file (template) however every time I open a new drawing and insert in the template file in the paperspace tab the attribute comes in but always with the logo?
The frame of the logo shows up with the file path of where is is located.
I've recently installed auto cad 2007lt on our new computer. I set up numerous tool palettes with blocks that we use often. I was pulling images from the palettes to my drawing with no problem.
Today when I tried inserting an image from the tool palette it is saying that the image can not be found. I've tried under previous drawings and new templates and have been unsuccessful.
inserting a Tiff image into a dwg file with Raster Design 2011. I have a image scanned at 400dpi and the image is a good quality image, some of the text is small be legible. When I insert the image with the imageattch command the image seems to gain pixels therefore causing some text to become unreadable. I've used the bitonal filter but then I lose some resolution. Is it normal for the TIFF image to appear more dense when brought into an Autocad drawing? If so is there a way to adjust the image to look more like the scan?
