I am working on a drawing and my boss wants me to put the company logo in the corner of the picture. Im really struggling to do this. I've done some reading up on the net and read that i must covert it from JPEG to DXF then from DXF to DWG. Which i have done and inserted.. But, the picture looks nothing alike the logo as it is just lines, can insert it with the colours etc?
If not how can i plot my cad drawing and print the logo on the same page, to right hand side of my drawing forexample.
I have just installed LT 13 and am trying to insert a jpeg as I have done so many times on previous versions of Autocad LT. why and how I can do this as it was previously through the insert command.
I am having trouble inserting a JPEG image in Inventor 2011 LT drawing (DWG) file. Â The Image button on Insert panel under Manage tab is always disabled. Â I am able to bring in the image using Insert Object feature and selecting 'create from file' option. Â Although the resulting image looks OK on the screen, it looks inverted and distorted when printed.
I am facing the same problem when I try to insert image in a dwg sketch, however, the process works as expected on part sketches.
I am using AutoCAD LT 2009, and am having some problems.
I want to have some jpeg images on my cad drawing, so i just insert the image, which is fine. I can print this fine, and allis good. however,when i go to PDF the drawings, using a standard downloadable DWG - PDF convertor, the jpegs dissapear. everything else is fine, but the jpegs are no longer on the PDF'ed drawing.
I am running inventor 2010 suite with service pack 2 and when I try to insert a JPEG or BMP into a Drawing Sheet (not a sketch on a part file), the image does not appear. I have done this on previous versions numerous times and it worked perfectly fine.
The message which appears on the screen says "TEMPEMBED.BMP" and it has a photoshop CS4 logo. When I do a print preview, nothing appears on the page. I have opened up a previous drawing sheet, which has a JPEG & BMP inserted and the image is shown, but when I try to insert another image on the same drawing sheet, the same thing happens.
I am running a pretty fast machine, with an intel i7 processor and a pretty hardcore graphic card.
I am asking user for scale factor and insertion point. but the actual image always display width and height as the scale value, if i insert value of 5 for scale factor width and height will be 5 but not according to coordinates system.
 but if i insert the same image manually width and height are calculated by autocad according to scale factor before insertion.  double scale = promptDoubleResult.Value; var xAxis = new Vector3d(scale, 0, 0); var yAxis = new Vector3d(0, scale, 0); var ucs = document.Editor.CurrentUserCoordinateSystem; using (Transaction trans = database.TransactionManager.StartTransaction()) { RasterImageDef rasterImageDef = new RasterImageDef(); rasterImageDef.SourceFileName = imagePath; rasterImageDef.Load(); [code]......
I have a drawing that has an OLE image in the drawing format. In this particular drawing the image is not showing up. The border around the image is there but nothing else. All my layers are on and OLEHIDE is set to 0. Every other drawing I opened that uses the same format is fine.
I have attached the file with just the formats (my company is pretty strict with posting any drawings). The image should appear in the bottom left corner.
What is the AutoCAD command within AutoCAD 2013 for inserting image files produced in .JPG format as company logos onto an A1 drawing border for use in AutoCAD.
I created an attribute of a title block, our company logo is inserted as a raster image within the attribute, I created this dwg file into a dwt file (template) however every time I open a new drawing and insert in the template file in the paperspace tab the attribute comes in but always with the logo?
The frame of the logo shows up with the file path of where is is located.
I've recently installed auto cad 2007lt on our new computer. I set up numerous tool palettes with blocks that we use often. I was pulling images from the palettes to my drawing with no problem.
Today when I tried inserting an image from the tool palette it is saying that the image can not be found. I've tried under previous drawings and new templates and have been unsuccessful.
inserting a Tiff image into a dwg file with Raster Design 2011. I have a image scanned at 400dpi and the image is a good quality image, some of the text is small be legible. When I insert the image with the imageattch command the image seems to gain pixels therefore causing some text to become unreadable. I've used the bitonal filter but then I lose some resolution. Is it normal for the TIFF image to appear more dense when brought into an Autocad drawing? If so is there a way to adjust the image to look more like the scan?
I have a basic problem but I can't seem to be able to get around it. I added an image to a sketch successfully but it cam with a yellow line around it (see attached) and I can't remove it. In the sketch properties I was able to change it's color to black to make less visible but it's still there.
how to insert a gif image file to my workspace? If it is in JPG format, I usually open that file and then open it and just drag and drop to my current workspace, but Photoshop doesn't allow me to do that for GIF format I did try to convert it to JPG but the image quality was decreasing even I tried with some programs and set the compression to 0 (zero). So I do want to just insert that GIF file into my current workspace.
I installed VideoStudio Pro X6 and service pack 1.Always then trying to insert an image I get an error message, wrong format, copy-protected or to less space, even if I try to insert one of the samples or VideoStudio created snapshot.The same error message appears then I make a snapshot but the file was created.
All the samples are linked to c:program filescorel ... instead of c:program files (x86)corel ... this is the default folder on 64-bit-systems. Relinking is not possible.I registered the product but Corel did not send the support code!
how to see that's half the battle here, trying to figure out how to ask theblasted question so someone can help me.....have one image open and insert another image over it. Like a large image and then a smaller image in a corner or in the center. Or how to make a collageof images.
Im trying to insert an image into 3Ds max. I selected my object I want it pasted onto, I then opened up my materials editor, under maps and then standard I selected Bitmap and selected my image. The image bitmap is showing up in the materials editor viewport but I cant apply it any objects (Assign material to selection icon is unavailable).
I mostly use Max for 3-D walkthroughs of architecture models I design in Revit, and in all of my renderings I have computer monitors and televisions. For effect I would like to make the monitors appear as though they are in use during the walk through, nothing fancy, just a standard home-screen would do.
Is it possible to insert .jpg or png screen-shot files in place on the monitor screens to make these objects look active, and how would I accomplish this task?
Don't know much about photo shopping or manipulating images, but hope to learn more, since I already have one Etsy shop (selling beauty products) and am planning on opening another (selling miniatures).
For my first Etsy shop I used a Free Etsy Banner provided by a blogger I follow. I did not include text or my shop name in my Banner.
I have downloaded another banner from this same blogger, this one has the option to include text (your shop name) and I would like to include my shop name for the miniatures Etsy shop I plan to open within about six month.
I asked her how to enter text and she said to just open it in Picture, or whichever photo shop type program I use. I have a Mac, am fairly broke, Gimp was recommended to me by another small business owner.
I managed to figure out how to enter text, use the text editor, and place it in the blank field. The only problem is I can't see the text, despite playing around with the colour of the text.
So I am making digital color prints at 24x30. the photography work is about color fields and gradients, so I need super high res files. I have set the size to 24000x30000 pix at 1000 dpi..now my problem, when i go to save the gimp file as a jpeg i get this error message "JPEG image plug-in could not save image"
I am trying to find a faster way to save my images. I shoot in raw, save raw images as jpegs after editing them in Camera Raw. I am using Photoshop CS6 on a Mac version 10.7.5. When I save, I either have to save as a copy of the exisiting image, or replace the image I'm working on. Other forums I've read said to make an action to save and create a function key to make this process faster, but my function keys aren't working, and playing the action I've created still makes a copy of the image.
When you reduce the image quality of a jpeg image , How exactly is it reducing the quality? is it applying file compression , reducing bit depth or is it reducing the sampling rate of the image? or anything close to the above....
Is there a simple way to convert a JPEG type image to DXF/DWG? A friend wants me to have an image laser cut into sheet metal to create a fire ring. I received the image in a jpeg format. There has to be an easier way to create the geometry then me importing the image into AC and tracing it. Below is the image.
today client send me one drawing which is on jpep file format so i want to convert that file into autocad so can you people refer me some go0d converting software....
