I am taking 4 images and putting them together into 1 image. When I import that image into Quark only the first image appears; the other 3 are missing. I have done the same procedure many times before with success.Â
I am still a hold out on using Quark Xpress (v6.5 for Mac OSX 10.3.9). I would like to use product photography in my layouts that include drop shadows that would have a transparency effect once placed in Quark. I suspect that this needs to be done with Alpha Channels in Photoshop, but for the life of me cannot figure this out.
I'm using CS and am trying to get an image into a QuarkXpress doc (Ver 6.1).
I think it has a tranparent background (i.e. I can see through the image in PS to the gray and white checked board). I save it as a TIFF and then when I 'get picture' from Quark, it appears with a white background.
How can I lose the background so that the holes in the image show the background that is in the picture box in Quark?
how to insert a gif image file to my workspace? If it is in JPG format, I usually open that file and then open it and just drag and drop to my current workspace, but Photoshop doesn't allow me to do that for GIF format I did try to convert it to JPG but the image quality was decreasing even I tried with some programs and set the compression to 0 (zero). So I do want to just insert that GIF file into my current workspace.
how to see that's half the battle here, trying to figure out how to ask theblasted question so someone can help me.....have one image open and insert another image over it. Like a large image and then a smaller image in a corner or in the center. Or how to make a collageof images.
I have PaintShop Photo Pro X3 running on Windows 7 x64. I have created artwork for an ad that I am purchasing in a trade publication. The contact person at the magazine tells me that they need my artwork in CMYK format and in a file type of eps. They need the CMYK format in one file as opposed to being broken out into separate channels. They are using Quark software. How I can get my artwork into the format that Quark needs?
If I save an AI file with Pantone cols as an eps and import into Quark the colours are totally different. Why, which is correct and how do I correct this?
I installed VideoStudio Pro X6 and service pack 1.Always then trying to insert an image I get an error message, wrong format, copy-protected or to less space, even if I try to insert one of the samples or VideoStudio created snapshot.The same error message appears then I make a snapshot but the file was created.
All the samples are linked to c:program filescorel ... instead of c:program files (x86)corel ... this is the default folder on 64-bit-systems. Relinking is not possible.I registered the product but Corel did not send the support code!
I have just installed LT 13 and am trying to insert a jpeg as I have done so many times on previous versions of Autocad LT. why and how I can do this as it was previously through the insert command.
Im trying to insert an image into 3Ds max. I selected my object I want it pasted onto, I then opened up my materials editor, under maps and then standard I selected Bitmap and selected my image. The image bitmap is showing up in the materials editor viewport but I cant apply it any objects (Assign material to selection icon is unavailable).
I mostly use Max for 3-D walkthroughs of architecture models I design in Revit, and in all of my renderings I have computer monitors and televisions. For effect I would like to make the monitors appear as though they are in use during the walk through, nothing fancy, just a standard home-screen would do.
Is it possible to insert .jpg or png screen-shot files in place on the monitor screens to make these objects look active, and how would I accomplish this task?
I am working on a drawing and my boss wants me to put the company logo in the corner of the picture. Im really struggling to do this. I've done some reading up on the net and read that i must covert it from JPEG to DXF then from DXF to DWG. Which i have done and inserted.. But, the picture looks nothing alike the logo as it is just lines, can insert it with the colours etc?
If not how can i plot my cad drawing and print the logo on the same page, to right hand side of my drawing forexample.
Don't know much about photo shopping or manipulating images, but hope to learn more, since I already have one Etsy shop (selling beauty products) and am planning on opening another (selling miniatures).
For my first Etsy shop I used a Free Etsy Banner provided by a blogger I follow. I did not include text or my shop name in my Banner.
I have downloaded another banner from this same blogger, this one has the option to include text (your shop name) and I would like to include my shop name for the miniatures Etsy shop I plan to open within about six month.
I asked her how to enter text and she said to just open it in Picture, or whichever photo shop type program I use. I have a Mac, am fairly broke, Gimp was recommended to me by another small business owner.
I managed to figure out how to enter text, use the text editor, and place it in the blank field. The only problem is I can't see the text, despite playing around with the colour of the text.
Can Quark [or Quark Express] open a CorelDraw file and preserve all of the settings like the exact distance from the curves or text to the edge of the canvas?
I have CorelDraw X6. I work for a small business that sells business cards and letterhead to customers.
I have been sending camera ready artwork to a printer. The printer opens the file with I think a Quark, or maybe a Quark Express, program.
They save the file in PDF format and then e-mail me the PDF file as a proof.
Almost always crucial settings like the distance(s) from the curves or text to the edge of the canvas has been changed in their PDF proof file.
For example, I might send them a CorelDraw file where the text at the bottom of a page is set .350" from the bottom of the canvas. The proof that they send me might be .4" or .5" from the bottom.
Today, a woman with the printer told me that their software would not preserve the exact CorelDraw settings when their software opens a CorelDraw file and that there is not any way for them to know the exact CorelDraw settings.
I find that hard to believe. How will Quark open a CorelDraw file and preserve all of the settings or are some of the settings, like curve/text setback from the canvas, lost?
I am asking user for scale factor and insertion point. but the actual image always display width and height as the scale value, if i insert value of 5 for scale factor width and height will be 5 but not according to coordinates system.
 but if i insert the same image manually width and height are calculated by autocad according to scale factor before insertion.  double scale = promptDoubleResult.Value; var xAxis = new Vector3d(scale, 0, 0); var yAxis = new Vector3d(0, scale, 0); var ucs = document.Editor.CurrentUserCoordinateSystem; using (Transaction trans = database.TransactionManager.StartTransaction()) { RasterImageDef rasterImageDef = new RasterImageDef(); rasterImageDef.SourceFileName = imagePath; rasterImageDef.Load(); [code]......
I have a drawing that has an OLE image in the drawing format. In this particular drawing the image is not showing up. The border around the image is there but nothing else. All my layers are on and OLEHIDE is set to 0. Every other drawing I opened that uses the same format is fine.
I have attached the file with just the formats (my company is pretty strict with posting any drawings). The image should appear in the bottom left corner.
What is the AutoCAD command within AutoCAD 2013 for inserting image files produced in .JPG format as company logos onto an A1 drawing border for use in AutoCAD.
I am having trouble inserting a JPEG image in Inventor 2011 LT drawing (DWG) file. Â The Image button on Insert panel under Manage tab is always disabled. Â I am able to bring in the image using Insert Object feature and selecting 'create from file' option. Â Although the resulting image looks OK on the screen, it looks inverted and distorted when printed.
I am facing the same problem when I try to insert image in a dwg sketch, however, the process works as expected on part sketches.
I created an attribute of a title block, our company logo is inserted as a raster image within the attribute, I created this dwg file into a dwt file (template) however every time I open a new drawing and insert in the template file in the paperspace tab the attribute comes in but always with the logo?
The frame of the logo shows up with the file path of where is is located.
I've recently installed auto cad 2007lt on our new computer. I set up numerous tool palettes with blocks that we use often. I was pulling images from the palettes to my drawing with no problem.
Today when I tried inserting an image from the tool palette it is saying that the image can not be found. I've tried under previous drawings and new templates and have been unsuccessful.
inserting a Tiff image into a dwg file with Raster Design 2011. I have a image scanned at 400dpi and the image is a good quality image, some of the text is small be legible. When I insert the image with the imageattch command the image seems to gain pixels therefore causing some text to become unreadable. I've used the bitonal filter but then I lose some resolution. Is it normal for the TIFF image to appear more dense when brought into an Autocad drawing? If so is there a way to adjust the image to look more like the scan?
I have a basic problem but I can't seem to be able to get around it. I added an image to a sketch successfully but it cam with a yellow line around it (see attached) and I can't remove it. In the sketch properties I was able to change it's color to black to make less visible but it's still there.
