3ds Max :: Inserting And Rendering Image Files?
Jan 12, 2012
I mostly use Max for 3-D walkthroughs of architecture models I design in Revit, and in all of my renderings I have computer monitors and televisions. For effect I would like to make the monitors appear as though they are in use during the walk through, nothing fancy, just a standard home-screen would do.
Is it possible to insert .jpg or png screen-shot files in place on the monitor screens to make these objects look active, and how would I accomplish this task?
View 1 Replies
ADVERTISEMENT
Dec 19, 2012
What is the AutoCAD command within AutoCAD 2013 for inserting image files produced in .JPG format as company logos onto an A1 drawing border for use in AutoCAD.
View 2 Replies
View Related
Aug 13, 2011
I have an image with ".sid" extension. it's a high detail image. I think these images are taken from planes. I can only view it with LizardTech Express View Browser Plug-in, but i need to make drawings on this image with autocad.
View 2 Replies
View Related
Jan 23, 2012
I have recieved several aerials that I need to insert into AutoCad. Is there a way to insert several files at the same time?
View 3 Replies
View Related
Oct 15, 2012
I have downloaded a slew of AutoCAD linetype files and have tried to "cut and paste" them into my acad notepad with no success - (maybe that's where I'm going wrong, right off the bat). Anyway, after pasting the lines of text into my notepad and saving the updated notepad, I return to AutoCAD only to find that the linetypes are not available for use.
View 8 Replies
View Related
Apr 6, 2006
how to insert a gif image file to my workspace? If it is in JPG format, I usually open that file and then open it and just drag and drop to my current workspace, but Photoshop doesn't allow me to do that for GIF format I did try to convert it to JPG but the image quality was decreasing even I tried with some programs and set the compression to 0 (zero). So I do want to just insert that GIF file into my current workspace.
View 3 Replies
View Related
Oct 11, 2012
What do I need to do in order to insert .sid image files into civil 3d 2011 drawings?
View 4 Replies
View Related
Dec 5, 2012
I'm using AutoCAD LT 2013 and I'm having problems inserting .dwg and .dxf files into an existing open dwg. I have previously done this successfully on this computer so I'm pretty sure that I am doing it correctly. What happens is this: I go to insert the file, select it and it shows the correct image in the preview window, but when the actual file inserts into the drawing, it's a completely different file all together. The funny thing is, I have restarted my computer and the program several times, and each time it inserts a different drawing. I have tried inserting a .dwg and .dxf and they both insert the wrong one. I tested it by xrefing the document that I want to put in and it shows up correctly when I xref. I've also tried saving it as a block with the WBLOCK command, and still the wrong thing inserts.
I downloaded the service pack for AutoCAD LT 2013 and nothing has changed.
View 1 Replies
View Related
Aug 25, 2013
I installed VideoStudio Pro X6 and service pack 1.Always then trying to insert an image I get an error message, wrong format, copy-protected or to less space, even if I try to insert one of the samples or VideoStudio created snapshot.The same error message appears then I make a snapshot but the file was created.
All the samples are linked to c:program filescorel ... instead of c:program files (x86)corel ... this is the default folder on 64-bit-systems.
Relinking is not possible.I registered the product but Corel did not send the support code!
View 1 Replies
View Related
Jun 28, 2012
I have just installed LT 13 and am trying to insert a jpeg as I have done so many times on previous versions of Autocad LT. why and how I can do this as it was previously through the insert command.
View 2 Replies
View Related
Jul 17, 2009
how to see that's half the battle here, trying to figure out how to ask theblasted question so someone can help me.....have one image open and insert another image over it. Like a large image and then a smaller image in a corner or in the center. Or how to make a collageof images.
View 6 Replies
View Related
Aug 6, 2004
I am trying to prepare a POS document in Quark which needs me to insert our company logo
the company logo images that i have on cd are red logo on white background.
The POS that I need to do are White on blue background.
I have converted the imaged to white on blue, but when the image is inserted into Quark, the 2 blues are different shades.
The logo image is a cut out but has been flatten. How can insert just the wording with no background into my Quark document?
View 1 Replies
View Related
Sep 21, 2011
Im trying to insert an image into 3Ds max. I selected my object I want it pasted onto, I then opened up my materials editor, under maps and then standard I selected Bitmap and selected my image. The image bitmap is showing up in the materials editor viewport but I cant apply it any objects (Assign material to selection icon is unavailable).
View 1 Replies
View Related
Jun 2, 2010
I am working on a drawing and my boss wants me to put the company logo in the corner of the picture. Im really struggling to do this. I've done some reading up on the net and read that i must covert it from JPEG to DXF then from DXF to DWG. Which i have done and inserted.. But, the picture looks nothing alike the logo as it is just lines, can insert it with the colours etc?
If not how can i plot my cad drawing and print the logo on the same page, to right hand side of my drawing forexample.
View 9 Replies
View Related
Dec 19, 2012
Don't know much about photo shopping or manipulating images, but hope to learn more, since I already have one Etsy shop (selling beauty products) and am planning on opening another (selling miniatures).
For my first Etsy shop I used a Free Etsy Banner provided by a blogger I follow. I did not include text or my shop name in my Banner.
I have downloaded another banner from this same blogger, this one has the option to include text (your shop name) and I would like to include my shop name for the miniatures Etsy shop I plan to open within about six month.
I asked her how to enter text and she said to just open it in Picture, or whichever photo shop type program I use. I have a Mac, am fairly broke, Gimp was recommended to me by another small business owner.
I managed to figure out how to enter text, use the text editor, and place it in the blank field. The only problem is I can't see the text, despite playing around with the colour of the text.
View 9 Replies
View Related
Jan 27, 2013
By that I mean I want certain parts of my text to be links. I don't know if this is possible with paint.net.
View 4 Replies
View Related
Nov 16, 2013
I am using Inventor Pro 2014 on Windows 8.1 and when I insert or import a DWG file from AutoCAD into Inventor to extrude it into a solid, nothing shows up. Apparently a wizard is supposed to pop up but when I try it nothing at all happens. I have tried reinstalling it but nothing seems to work. I think importing a DWG into a 2D sketch is a fairly basic thing to do but I'm baffled that it isn't working. I have SP1 already installed.
View 7 Replies
View Related
Jan 22, 2013
When I insert a pdf it does not have a white background and it REALLY slows down CAD. I played with the contrast and fade but the image gets worse. The best I can get the image to look is having the contrast set to 100 and the fade set to 0. I have used this pdf in other projects using 2004 and 2007 but with 3013 it is inserting it quite differently.
View 6 Replies
View Related
Jun 16, 2012
I have just upgraded to Videostudio Pro X5. I am starting a project and would like to upload the videos and photos as my first task.
I have some video footage on a dvd and when I try to upload it I get a message saying:
"unable to open file / file format mismatch"
It has been a while since I have used this program and my brain is slowly trying to remember how it all works
View 2 Replies
View Related
Nov 22, 2011
When trying to open or insert files, the folders and files are listed in reverse alphabetical order (Z on top to A on bottom) in AutoCad. All other programs are listed fine, Word, Visio, etc. Is there a variable I can type in? I have changed none of the setting that I know of. Using AutoCad 2009LT.
View 2 Replies
View Related
Oct 9, 2013
How do I insert a copyright symbol into text on an image?
View 1 Replies
View Related
Dec 5, 2013
I am asking user for scale factor and insertion point. but the actual image always display width and height as the scale value, if i insert value of 5 for scale factor width and height will be 5 but not according to coordinates system.
 but if i insert the same image manually width and height are calculated by autocad according to scale factor before insertion.
Â
double scale = promptDoubleResult.Value; var xAxis = new Vector3d(scale, 0, 0); var yAxis = new Vector3d(0, scale, 0); var ucs = document.Editor.CurrentUserCoordinateSystem; using (Transaction trans = database.TransactionManager.StartTransaction()) { RasterImageDef rasterImageDef = new RasterImageDef(); rasterImageDef.SourceFileName = imagePath; rasterImageDef.Load();
[code]......
View 1 Replies
View Related
May 29, 2013
I have a drawing that has an OLE image in the drawing format. In this particular drawing the image is not showing up. The border around the image is there but nothing else. All my layers are on and OLEHIDE is set to 0. Every other drawing I opened that uses the same format is fine.
I have attached the file with just the formats (my company is pretty strict with posting any drawings). The image should appear in the bottom left corner.
View 4 Replies
View Related
Sep 29, 2011
I am using VS X4 on windows 7. I have an .AVI file which I captured from a VHS tape so it includes sound. The video is 105 minutes long and the file size is 21.9 GB which is huge. I brought it into a project, edited as necessary including making adjustments to the sound in the AVI file, added titles, transitions, and an additional sound track. When I render this project to make a video file it takes a very long time and the resulting .wmv file is huge (11.2GB). I hate to think what it would be to make a DVD. Is there some thing I should do differently to avoid the rendering time and the size of the files?
View 6 Replies
View Related
Jun 14, 2012
LR Rendered my D3 and D3s Raw files very closely to the Nikon software and the camera jpgs, but since I have started using a D4, I am noticing a dissapointing difference between the LCD rendering, the jpgs. and the LR raw rendering of my files. I think I last saw this in LR2, with early D3 files, but it's been a while.Â
Â
So if I shoot a NEF file and a JPG file at the same time, the JPG files look really good, the same sweet goodness I saw on the LCD. Now I have been doing this a while, and I know about camera profiles, custom camera profiles, and that Raw files need a little massaging, but I don't want to break out the nikon software to get the best results from my raw files, and that's what I have been doing lately on my final picks.
Â
I am attaching a sample. Left - Right, in camera jpg, jpg from view nx2, LR jpg from untouched nef (camera standard profile). You will notice the skin tones and the dynamic range are best on the left, in camera jpg.
View 9 Replies
View Related
Aug 23, 2010
I am having trouble inserting a JPEG image in Inventor 2011 LT drawing (DWG) file. Â The Image button on Insert panel under Manage tab is always disabled. Â I am able to bring in the image using Insert Object feature and selecting 'create from file' option. Â Although the resulting image looks OK on the screen, it looks inverted and distorted when printed.
I am facing the same problem when I try to insert image in a dwg sketch, however, the process works as expected on part sketches.
View 8 Replies
View Related
Aug 8, 2013
I am using VideoStudio X6 Pro.
I have been doing video editing for a local kids Theatre company (freebie) and I am not a professional.
They have changed their video camera and they have provided me MTS video format.
Playing the MTS file in windows media player, the video is crystal clear.
It looks ok in VideoStudio but after it is rendered to a DVD its quality has dramatically dropped .... pixilation being the main issue.
I have tried using various trial converters and converting it to an AVI or MPeg2 format first and then editing it but I am still getting very poor quality output.
The final compression is very small (if any) ....
I had about 40 mins of video, so the mpeg2 file should not have to be compressed, but the final dvd was far worse than the actual video file.
How can I get the best results from using an MTS file format ??????
View 8 Replies
View Related
May 27, 2011
I want to render a scene. In Render Setup/Render Output/Save Files, the Save File box is ghosted, so I can't save the files. What's causing this? I tried rebooting Max, but that didn't work either.
View 1 Replies
View Related
Sep 7, 2013
I am having problems with LR5.2RC rendering a substantial number of my .dng files in monochrome. There appears to be no logic to this, and files appear in colour in Finder. I am using an iMac with Mountain Lion.
View 12 Replies
View Related
Oct 18, 2012
I recently upgraded to Map 3d 2010 to Mapd 3d 2013 and i cannot figure out how to find the commands to insert images or import/export shp files.
I'm running 2013 in "autocad classic" and did so with 2010 as well. 2010 had a menu bar pull down called "Map" where I could insert an image (Image->Insert). There was also in 2010 a toolbar named  "Map" that had import shp, export shp and assign coordinate system.
I can't find any of this in 2013. I can't even find the commands in the customization to create my own toolbar. The commands work (mapiinsert, mapimport, mapexport and ADESETCRDSYS) but i can't find them listed anywhere.
View 2 Replies
View Related
Mar 7, 2013
I created an attribute of a title block, our company logo is inserted as a raster image within the attribute, I created this dwg file into a dwt file (template) however every time I open a new drawing and insert in the template file in the paperspace tab the attribute comes in but always with the logo?
The frame of the logo shows up with the file path of where is is located.
View 4 Replies
View Related
