I have VideoStudio Pro X3 and when I try to insert movie clips I get a "File Mismatch" message. My clips are created from a smart phone - Samsung Fascinate - and are of .MP4 format.
View 5 RepliesI have just upgraded to Videostudio Pro X5. I am starting a project and would like to upload the videos and photos as my first task.
I have some video footage on a dvd and when I try to upload it I get a message saying:
"unable to open file / file format mismatch"
It has been a while since I have used this program and my brain is slowly trying to remember how it all works
Can the new version of studio pro handle movie clips recorded at 24FPS?
View 14 Replies View RelatedI am using VideoStudio v11. I have a long section of video which is of someone making a speech. I want to insert some cut-aways into the sequence, whilst obviously retaining the audio running sequence.
I have split the audio from the video track, but I can't seem to figure out how to remove a section of the video and replace it exactly with a cut-away section of video. I need to keep the video and audio in sync. Maybe I am going about it wrong and don't need to split the audio off - but then how would I insert just a clip of video without disturbing the audio.
I have just installed VideoStudio Pro X5 on my computer and have not been able to open any videos in it due to 'file mismatch error.mp4'.So I went online to search for fixes and came across the patches. I downloaded BOTH but only pack TWO would work for me.When trying to install pack 1 (of COURSE the most important) I get this error message:
"The installed version of the application could not be determined. The setup will now terminate" EVERY single time I retried it, this is all I got. Pack 2 went off without a hitch and installed perfectly.
And I know there are other posts about this and they say 'product is already updated if you get this message' but I am still having the issue.Details about where my videos I'm trying to edit came from: recorded from an AverMedia C281 Game Capture HD in full 1080 HD
Videos were recorded on to a WD Elements 2TB 2.0 external hard drive- which in turn saved them as .mp4 files.
'How' am I trying to add video?I am on the 'edit' yellow box.I am clicking on 'file', 'insert media file into library' then I select the 3 hour video (are there limits? I've also tried 20 minute videos and they don't work either) that I'm trying to edit and it then reads:
"Unable to open file M:(video number). File Format mismatch. Then [16803:1:2] in brackets?So I'm sitting here with a product that is useless to me as I can't even get it to open anything up. And I don't want to spend time converting these videos as many of you say 'it works fine for me- don't know what you're doing wrong. all you can do is convert them'.
I used to own Ulead Video X2 and after consulting many times with Ken Berry I was successful in some important projects. I now have purchased VideoStudio X6 with the hopes of it performing well right out of the box. No such luck. I have installed in on my HP work laptop thinking it's much more powerful than my home PC, but in trying to create my first project, I am not able to simply import a jpg to do a slide show with music. It gives the error "Unable to open file [xxx....xxxx...jpg]. ! File format mismatch [16803:1:3]"
I have of course scoured the web and have seen some other users struggling with the same error. So far all I've seen is that it may be the video card or Update to the Graphics board driver. I'm not too techy though I work at HP...and am really nervous about altering any updates on my work laptop. I haven't yet tried any updates or patches thinking that if I just got this, shouldn't it be the latest? I was successful in importing video from an iPhone and I've been successful with mp3 audio files as well, but the jpg's just aren't working. I even tried converting the jpg files to pdf format - but that's not supported I see as an importable file.
I have also noted that if I try to view the sample pictures from the library, it tells me "Original file [C:program filescorelcorel videostudio pro X4samplesimagexxxxxJPG] doesn't exist. I am able to view the sample video clips. But when looking at where Corel was saved on my system, it didn't default to "Program Files" which I thought is what it stated upon installation, but it put it in "Program Files (x86)" So I don't even know if I can relink to fix that. Even if I do, that doesn't solve my jpg fundamental problem. I hate to sound like a whiner, but I'm really discouraged and hope the fix is easy after spending so much for a reliable Video SW program. My wife's best friend passed away and I've promised a tribute slide show for her wake to be completed in the next 2 weeks.
I have problem when I import video. It's says unable to open file, file format mismatch. I have make a clip for Wednesday!!
In addition, LAST TIME WHEN I pressed "create video file" it stopped in the middle of the saving. Why did it happen?
I have just download and installed Corel VideoStudio Pro X4. Mainly with the expectation I could import and work with MTS file formats.
However I've gone to import them and it comes back with a file format mismatch error. This doesn't make any sense to me, as I read up on it and thought the program could work with these files.
The files that I want to import are very big, eg/ 206mb and 418mb. Do I need to downsize these to work with them? If so, how do I do this?
I have Corel VideoStudio x2. I am trying to open an mp4 video file and I get this error message; Unable to open file [C:xxxxx.mp4]. File format mismatch. [16803:1:2] I can play the file with Windows Media Player, so I know it runs ok.File came from a cell phone device.
View 1 Replies View RelatedI am trying to add a few sounds to the library so I can use them in my project. I downloaded a few wav files and when I try to import them in my media library, I get the message that File format mismatch.
I did import wav files in the past without any issue. Is there something else to wav files than just the name and extension which could be causing this error?
I have been trying to import AVI (H.264) files but keep getting the file format mismatch. The files all open, play and edit (WMM) on my laptop but not on VS. Other file formats seem to be fine but I wanted this program for its HD capabilities. The files,on sdhc card are from a Veho Kuzo camcorder. how do I set up the preferences so that the program can see these files?
View 9 Replies View RelatedI have used an exceptionally good website called [URL]...... for a number of years with no problems. I have just downloaded from them a .mp3 file lasting 5 minutes but when I come to load it into my project , I get an error message saying "File format mismatch". The only difference that I see between this and all the previous files I have downloaded from them is that this one has a bitrate of 320kbps compared to the previous ones of 130-190kbps.
View 6 Replies View RelatedI just installed VS X5 and tried to import a video from my GoPro Hero3 Black. Two Videos will work but all the others will not. I keep getting "file format mismatch" error.
View 1 Replies View RelatedI'm trying to insert stills into my project and I keep getting the "file format mismatch" error. I've tried JPG, PNG and even bitmap formats, I've tried different pictures from different cameras/sources and the result is the same every time.
View 12 Replies View RelatedI copied the files over. I opened Ulead and tried to open the project I was working on. So it wanted me to Relink, which I did. But I got the error message: File format mismatch [16803:1:2] I checked the Smart Proxy.So I copied the files back to the old computer. I can open up the project with no problems.
View 7 Replies View RelatedI previously used VideoStudio 10 to capture and then edit my DV Camcorder files, this was on Windows XP and I never had any trouble with this. I have just captured my final DV tape with this camcorder (I'm about to get a new camcorder) on this old PC, however I have now got a new Windows 7 PC, and am now trying VideoStudio Pro X4. I have moved this captured AVI file to the new PC but as soon as I try to import it into VideoStudio I get the following:
File format mismatch
1081:1:3
I have used some other software to convert the AVI file into a DVD compatible MPEG2 file, so I guess I could do my editing on this instead if all else fails?
In VideoStudio X4 (SP1), I am trying to import an edited (VSX4) project into the library in order to use parts of it in a different project. This is something I have done successfully before but the last couple of times I have tried I get the message: “Unable to open file. File format mismatch”. (1081:1:3) There is no problem opening up the project in the normal way it is only when I try and import it into the library. I have compared the properties of these files with the successfully imported files and, to me, they look identical. They were all captured from video in the same way,
View 9 Replies View RelatedI have tried to add JPG images off my laptop to Video studio and every time I attempt to import an image into it, it comes up with a message the runs along the lines of ''unable to open file, file format mismatch, [16803:1:3]''. I took the pictures with my Canon G9, but I also took video with my G9 and strangely enough the video will import and play. I do really like the Corel software and I am disappointed that this problem has occurred.
View 12 Replies View RelatedI am getting a File Format Mismatch error when I try to import .jpg , .png or .bmp files into Video Studio 5x. and 6x (trial version).If I try using the file menu (Insert media file to time linephoto), I get an error dialog that tells me I can't insert the file because of a few different reasons.
If I try using the Import Media Files folder icon, I get a File Format Mismatch Error. I can open these files with MS Paint as well as Paint Shop Pro so there is no issue with the files themselves. Also, if I just drag and drop the files from File Explore to the StoryBoard frame, I don't get any errors and I can render my video. Since I have two copies, I installed one on my vista machine and I don't get that error. I can import .avi movie and .mpg files with no error.
I also installed Service Pack 1 for Video Studio 5x. I am running Win7 64 bit home premium SP1.
This is driving me up the wall, I have pro X4 on my laptop and computer, I can't edit on my laptop as it lags, maybe Corel is too big for my laptop I don't know. On my laptop it allows me to import AVI. files, however, when it comes to my PC, it doesn't.It doesn't make sense how I CAN on my laptop but CAN'T on my pc, It did used to work fine on my pc when I had X2, but towards the end it started making the same error message
'Unable to open file [N:GFFILE309.AVI]. File mismatch'
I'm losing my temper, converting the files isn't an option as it makes my HD footage look like crap and pixilised, it also takes forever. I am at a dead end, I have installed the Corel Videostudio pro x4 codec and that hasn't worked at all.
I have just started getting an error code saying "File format Mismatch" when I attempt to save a VPS file as an mpeg. I've been doing this for years now I get this error code.
View 1 Replies View RelatedI have a brand new machine with Iintel i7 windows 7 and 8mg ram, just bought VSX5 pro ultimate.
When I try to import "insert" audio file (mp3) I get back an error "file format mismatch" and so I am unable to insert it to the movie.
Circumstance: Using VSPX3, how to combine multiple VSP files in a single movie using "insert media file into timeline" command on File menu?
Each VSP file represents different segments of movie. Each VSP file has items on Overlay track, title track, Music track, as well as transitions.
Each VSP file can be loaded using "Open Project" command under File menu.
Problem: VSPX3 displays error message "Unable to open file" "file format mismatch" [16803:1:2]
I am in the process of giving Video-studio another chance, in that I am testing VSX4 TBYB, Let me say - its a close tossup between Cyberlinks latest Power Producer and its amazing speed and quality output albeit a little more fiddly, and well to be honest if it were not for Video-Studio's past history being so fresh in my mind the decision would have been easy..
Anyway - So far my clips captured with my new Canon Legria HF-G10 don't show any evidence of that Old AVCHD editing blip or mismatched frames around a transition when working with raw AVCHD Files,
So is it safe to assume that the problem is now redundant for good!????? Or have I just been lucky so far - or is that unlucky? in that the TBYB is coded differently to the Ultimate version which I may or may not end up getting..
My other concern was and still is the fact that some of my old raw MP4 video clips can not be directly imported into VSX4 TBYB as they could when I tried VSX3 TBYB version before I ended up deferring, so I am wondering whether this only applies to the VSX4 TBYB seeing VSX3 TBYB had no problems? or is that another major issue that Corel just cant get right, what with only the occasional version capable of working with all multimedia files out there..
Which reminds me is anybody else noticing a significant contrast and detail loss even after smart rendering with VSX4? or is this only because I am using a TBYB version and thus full 25 Mbit Rendering is available in the Ultimate version?
I've been using Videostudio x4 a while with sucess. I'm now receiving the file mismatch error frequently on DVD Fab rips I try to edit.
View 1 Replies View RelatedWith prior versions of VideoStudeo I could create a movie and write it to a folder instead of a desk. I used this to preview movies before burning them. How to do this in X3. Neither DVD Factory nor Burn have this option.
View 6 Replies View RelatedI currently use X4, but have X5 ready to install. I shoot with a Canon M41 in the lower quality selection of HD. The file is AVCHD with about 16 mbps. The best HD is 24 mbps. I use the lower because with the software included with the camera, creating an AVCHD disk is limited to the lower standard and shooting in the higher standard required considerable time to down render the files to create the AVCHD disk. Camera Manual indicates 60i or 30p. Confused on this issue. When I create a movie in X4, I selected Blu-ray 1920P. This seems to introduce some slight artifacts like moving, fine horizontal lines and some strange flick of some objects like flower fields. Converting to an AVCHD disk takes several hours for a 25 minute movie consisting of 3 shorter movies. Also, the artifact effect is increased. I just did a trial of creating the movies in "same file type as first clip". The resulting file is about 15% smaller. Also, rendering an AVCHD disk is quicker and no artifacts. Am I on the right track? The software included with camera created excellent quality videos but was camera specific and very limited in adjustments, etc. Corel could provide more info about the confusing file types.
Also, X4 will crash with "unknown error caused program to stop". I save frequently to return to where I was editing. Doesn't seem to be a consistent answer on this issue. I hope X5 is more stable.
Vista Home Premium
4 Gig Ram
AMD Phenom 9500, quad core
ATI HD2400XT
I have converted my finished movie project into .flv format to be exported to a directory on my hard drive. I am not having any success with getting it done. How to move this movie file to my computer hard drive?
View 7 Replies View RelatedWhen I go to render a video that is composed of video clips and an .mp3 music file, I'd like to get the finished file into as big of a file as I can. In order to do that, I select the MPEG-4 option. The good news is it typically will result in an approx file size of 250MB for a 2 1/2 minute video, versus 170MB for any other file extension. The bad news is the audio is full of pops and noise. The audio remains fine with any other option other than MPEG-4.
I've tried numerous ways to 'reconstruct' the file...using different audio file extensions (it seems to prefer .wma files but there is a noticeable drop in clarity), rendering the video only then adding the audio file and rendering again...nothing works. I've also tried to modify the rendering options in each video selection that Corel offers (this is in the window that pops up asking for the file name just before you render it), but the audio never gets better.
As it did not working well in Win7, I have been uninstalling VS Pro X2. So, I purchased the downloadable upgrade version of VideoStudio Pro X3. The problem : I'm not able to open an existing VSP file. I get this error message : The file "name.vsp" is already in use.
View 14 Replies View RelatedI have animated a biped with 10 bip clips in a Transition Track. I need to insert another clip inside of the set of clips. Nothing worked in trying different things in MM, and I couldn't find any tutorials that are comprehensive. Is there a way to insert a clip inside of a mix rather than only at the end?
View 2 Replies View Related