Photoshop :: PSCS4 Memory Error With Image Processor
Nov 2, 2008
When I use the image processor in PSCS4 to process a large number of raw files using ACR 5.1 (Nikon D3 NEFs), I consistently receive an error message after about 10-11 files have been processed that the instruction at 0x696336ab tried to read memory at 0x6C (or thereabouts) and the memory could not be read. I am saving as JPEGs with the color space set to sRGB.
I de-installed and reinstalled PSCS4, but the error persists. The image processor worked fine with PSCS3. A workaround that solves the problem is to process the files as a batch using a simple action to accomplish the task.
I am running Windows XP Pro Service Pack 3 with a dual Xeon processor and 2G of error correcting memory.
View 2 Replies
ADVERTISEMENT
Nov 9, 2008
While working on a complex project with PSCS4 that involved copying and pasting from numerous open documents, I have been receiving an error message shown in the link. PS then shuts down with loss of my data.
I'm running Windows XP Pro with a dual Xeon processor workstation with 2GB of error correcting memory. PS3 and other applications have been working properly.
Any suggestions other than going back to PS3?
View 3 Replies
View Related
Apr 28, 2012
I am trying to use Image Processor for the first time and I get an error that say's
Server Interface Error "Step1Icon':375
View 2 Replies
View Related
Jun 12, 2013
When using Image Processor on Photoshop CS5, what does the following error message mean and how can I fix this issue? ReferenceError: Window does not have a constructor : 327
View 1 Replies
View Related
Nov 4, 2011
I do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
View 16 Replies
View Related
Oct 6, 2012
I get an unknown graphics processor error when I try to use Oil Paint filter. I have been able to use this feature before and all my devices are up to date.
View 6 Replies
View Related
Jan 26, 2013
Heres all my system info.
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]...
View 6 Replies
View Related
Nov 8, 2013
All the JPEG images I have converted from cr2 are grainy. I am converting them by Image Processor.
View 1 Replies
View Related
Apr 21, 2012
Why when I'm in Bridge and use the image processor, it's not closing the files after processing in Photoshop cs5? It did about a day or so ago and now all of a sudden it wont.
View 2 Replies
View Related
Jun 26, 2008
I usually use Image Processor to apply an action on tons of files on CS2. When I upgraded to CS3, I simply copied the actions over to the new action folder. Problem is, with long actions, CS3 doesn't close each file after it has performed the action unlike CS2, leaving the desktop filled with processed photos. Also a dialog box appear at the end with the message "Sorry, I could not process the following fileslist of files)". still, the processed files are saved in the destination folder. But here's the funny thing, when I run short actions, everything is ok.
View 1 Replies
View Related
Jul 2, 2013
I am trying to automate - image processor. From open files i am just trying to save theese pdf's as jpg's. Should be straight forward but I get this error...
"There were no source files that could be opened by Photoshop."
View 11 Replies
View Related
Apr 26, 2013
When I go to start Image Processor in CS5, I get "Image Processor.jsx could not be found".
View 3 Replies
View Related
Jul 17, 2009
When I run Image Processor, I tell the files to go to a specific folder. All of the processed images go to a folder named JPEG in the folder I specified. But, it also creates another copy of each image on my desktop which means a lot of cleanup after running 100 images. Anybody know how to stop that?
View 3 Replies
View Related
Sep 10, 2012
Im trying to create an action where I move image folder onto a droplet, which is image processor script and have all psd files turned to images. However, each time I get the dialog box asking me input/output folder information and so on... Is there are way to suppress this popup? I'm trying to automate as much as possible, including not having to click the same button in a box each time .
View 6 Replies
View Related
Oct 31, 2012
When I use the image processor from Bridge, I specify that I want it to process the images selected in Bridge, save as a PSD and run a set of actions.
The files do get saved to a PSD folder, but they do not get closed, so they all remain open. This slows the process down dramatically and it used to close them all, as it should.
View 18 Replies
View Related
Jul 26, 2012
Found out on a brand new install of Mountain Lion and Adobe Photoshop CS6 that Image processor will not save any othe images processed.
View 23 Replies
View Related
Oct 7, 2012
I am unable to access Image processor.
View 1 Replies
View Related
Nov 16, 2013
I have CS6 (CC) on a Mac (2013). I wrote an action for saving my work. In my normal .psd file, I use multiple layers for editing, etc. I also use a group folder for my B&W conversion. I made an action to utilize the saved .psd file to save both the color and the B&W versions. The B&W action works completely fine. However, the Image Processor will not properly run the color action. It tells me that "The object “layer “B&W”” is not currently available." If I open a .psd file and run it manually, there are no issues.
what do I need to change to have the IP correctly run the action?
View 9 Replies
View Related
Jan 4, 2009
I am not sure if this is a change in CS4 or something that I am doing incorrectly. But when I run Bridge CS4 < Photoshop < Image Processor (running an action that I have been running since CS2) the files do not close in photoshop after running the action. In all prior versions of PSCS#, photoshop closed the file after finishing the action. The files all save properly. But having hundreds of files opened inside of photoshop causes the scratch disk to go low and slows everything down.
View 5 Replies
View Related
Dec 20, 2008
I am completing the dialog executing the Image Processor on a batch of files.
In section 4, I can specify to run an action.
When is this action run? I can't find this documented anywhere.
If, in section 3, I specify to save as JPEG and Resize to Fit and also convert Profile to sRGB, will the action be executed after all these changes have been made? That is, just before saving?
I am using CS4 on Windows XP.
View 2 Replies
View Related
Jun 1, 2012
A error has popped up saying:
Could not complete your request becasue there is not enough memory (RAM).
View 7 Replies
View Related
Mar 19, 2013
Machine Spec :-
Machine :-- Windows 7 Pro 32 bit
CPU : -- 1 x Pentium Dual-Core CPU E5500 @ 2.80GHz (2792 MHz)
Motherboard :-- DG41WV
RAM :-- 4 GB DDR3
Videoadapter :-- Intel(R) G41 Express Chipset (1024 MB)
Hard Disk :-- C drive free space 23.8 out of 43.9
D drive free space 39.8 out of 48.8
E drive free space 37.6 out of 48.8
F drive free space 71.1 out of 91.2
Problem :-- When using the Mixer Brush tool,the photoshop stop responding and showing error.
Error Massage :-- "Could not use the Mixer Brush tool because there is not enough memory(RAM)"
View 4 Replies
View Related
Jun 17, 2013
Just installed CS6 about a month ago and at different points of taxing the program and my system and on various tools or events in Photoshop, I get an error that tells me there is not enough ram to complete the task.
I'm using CS6 Extended 64-bit and my comp specs are:
Windows 7 Pro
16 gigs of DDR3 memory
Intel i-7 second gen chip
ATI Radeon 5500 with 2 gigs onboard memory
And all of my stuff is up to date - including PS. I've allocated 75% of the system memory to PS in the preferences.
View 9 Replies
View Related
Aug 1, 2008
when I am converting RAW images via CS3 - ACR, I get the message "Not Enough Memory"
This happens when I try to convert more than 25 or so images during one Photoshop session. If I close down Photoshop and then reopen the program I can usually convert another 25 or so images before getting the message again. When I used CS2, I would be able to convert 100 or so RAW images with no problems.
I am not sure what to do.
My system is a Dell XPS with an Intel Core 2 Quad, with 4GB of ram.
View 39 Replies
View Related
Nov 8, 2007
I have given 80% (or 1.270 Gigs) of RAM to PS CS3 Extended. Everything works well until I use the new "Quick Selection Tool (W)." Whenever I use it, I get the message, "Could not complete your request because there is not enough memory (RAM)." The "Magic Wand" and all the other tools work great.
This happens regardless of what else is happening on the computer. Usually only PS and PS Bridge are the only apps open. And it doesn't matter how many images are open. I'm running Windows XP.
View 4 Replies
View Related
Feb 27, 2005
I am using CS and just recently ran into an error that is starting to frustrate me. I just upgraded from a P4 2.4 with 512mb of RDRAM to a P4 3.4 with 1024mb of DDR2 SDRAM. I never had this problem before, but I'm trying to filter>distort and I keep running into "not enough sufficient ram" errors. i closed all my other running programs and tried again. same error. so, i restarted the computer and ran PS again only to have the same problem. The picture is 8.5x11 at 500dpi. I increased the memory allowance from 50% to 70% and added more space for the scratch disc and still nothing. Whats going on? Isnt 1GB ram enough or do I need more?
View 9 Replies
View Related
Oct 18, 2004
i'm using photoshop CS, when i try pasting an image from other apps like macromedia fireworks, i will receive an error, not enough memory (RAM) . however, i have more than 200MB of free memory stated in my task manager. I find this very weird, i have check other setttings in photoshop, they're in default settings. i have tried to allocate more memory to photoshop, but nothing work!
View 1 Replies
View Related
May 27, 2013
when using image processor my images to select are grayed out, when they wernt yesterday?
View 3 Replies
View Related
Aug 27, 2012
I need to resize a batch of pngs and would like to use scripts/image processor. My original files are png files. There appears to be no option for outputting pngs -but i must output the files as tranparent pngs.
I'm using ps cs6 on mac os 10.6.8.
View 15 Replies
View Related
Jun 7, 2012
Is there a maximum number of files in a folder that can be processed by the Image Processor in CS5?
I'm trying to convert a bunch of jpgs to tiffs and I have to run an action (high-pass filter+threshold) before it saves them. This works out fairly well when using a small amount of files. When I try to load my main folders then Photoshop stops responding as soon as I try to initiate the processor. I sometimes get an error if I let it sit for a long time. I've tried this on two computers with the same result.
I have over a million files across 9 file folders that I need to process.
View 6 Replies
View Related
Apr 29, 2013
I use the image processor in Bridge to batch convert my finished .PSD images to JPEGs for final distribution. I have been doing this for a long time and it fits my needs and my workflow perfectly. Unfortunately, though, something seems to have changed in CS6. In CS5 this would delete all paths in the file, but it seems in CS6 the paths are still there in the final JPEGs. This is not ideal for a number of reasons (e.g. clients don't need to see that I used a path called "fat guy's belly" during editing...). How can I loose them?
View 7 Replies
View Related
