I am making an 8x10 poster with a very large number "8" in the middle. I want smaller text above and below the number. When I try to click the text tool below the number, it won't permit me to because of the space required below the number.
Can I turn the text number into a shape so that it doesn't have any space requirements around it?
I'm a long time Corel user trying out Coreldraw suite 6. I'm having a problem making some shape tools work on text (they work fine on other objects). If, for example, I write a piece of text and then select it, followed by the smear shape tool, most of the time the text is deselected and the tool does nothing. However, the Shape, Smudge and Roughen brushes work OK. I've tried using different fonts and text attribute to no avail. I've tried L&R clicking, holding the button down and double (and multiple) clicking slowly and quickly. But no deal. It's not a mouse or pad problem, it's the same on both.
BUT...guess what, every now and then it decides to work! Sometimes it will work on a piece of text and later won't work on it again.
Shape making from multiple complex shape and path layers?
so i have few layers(all vector paths and shapes) .
now how to make a shape from all of that. every new shape is layer for itself. I need it for logo.
I've just watched the video based on Elements 10 showing how to create text that follows a shape etc. However, I don't get the submenu for the Type tool to enable me to do this.
View 1 Replies View RelatedI am wanting to do some images prints but using text. I want to shape the text into the shapes of certain images eg waves, Christmas tress, castle, babies pram etc is this something i could do with elements?
View 1 Replies View RelatedUsed photoshop a few times before (succesfully!), and need to knock up something involving a infinity loop/symbol, or figure of 8 on it's side. It needs to have a certain shape or thickness. I'm sure i'd figure it out after a few hours, but haven't got the time for that..
View 1 Replies View RelatedI see it done all the time?
In fact why use shape vector mask and when should I not?
As title says, can you Disable Properties Panel Popping up When Making Shape?
I can't seem to find the anwser anywhere. Whenever I make any shape it keeps bringing the panel up.
I'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
I'm working with CorelDraw X3 and want to fill text into a round shape, while keeping it's exact outline. Hence, cutting of parts of words and letters is fine with me as long as the shape is well-defined. Unfortunately when filling paragraph text into a shape, the automatic line breaks lead to a quite irregular shape regardless of font size.
As workaround I arranged a mask in front of background and text but this requires a square paragraph text which is larger than the background. Since paragraph text obviously cannot be cropped with other objects I made the mask size bigger and filled it white. When exporting my document as image everything looks neat, but there must be a better way to do this in CorelDraw itself?
I tried converting the paragraph text into artistic text and cropping this, which works fine for a few words and a small object. But I'm talking around 1000 words here, and trying to crop this artistic text leads to very random cropping results. I guess such a large number of objects and knots is too much for CorelDraw to handle!?
I want to engrave the text 'TEST' all the way around this clonal object. When I use the emboss tool, selecting the option 'wrap to face,' it gives me an error message that the "face selected is not tangent to the profile plane."
I am using a work plane that is offset from the XY plane. I included a screen shot and the file that I am using (Inv. 2014)
I have booleand two splines, that were beveld to give them depth, than booleen together to make the shape of a car. I am having trouble completing the modeling because of the mesh. Is there anyway to make the mesh better (as in like a grid)?
View 4 Replies View RelatedI am thinking to make a helix in a path that is in arc shape. I want to is it possible to made such thing in autocad 2010. if possible.
View 2 Replies View RelatedAs seen in the attached image, I want the red arc shape to cut out from the green logo it is sitting on top of, while also having the red arc dissappear and reveal the transparent bg. I have tried a bunch of different ways that I have read from these forums but none of them seem to work. Obviously I'm missing something. The green shield logo is made of multiple objects. The closest I got was the arc shape cut out from some of the objects of the green logo, but not all of them, and the arc shape didn't cut out as an arc, but rather as the original rectangle. The arc is created with a regular rectangle with arc effect.
View 3 Replies View RelatedText is allowed only on the outside of a rectangle shape. The text cursor disappears when I try to enter it into the rectangle and when I place it on the edge of the rectangle, it rurns into a slanted "A" and allows texting on the border of the rectangle. Corel Paint Shop Photo Pro X3 (build date Sept 7, 2010). This software came with my new HP Pavilion dv7.
View 1 Replies View RelatedSo I am starting with a 12 sided star vector and using effect>stylize>round corners I am trying to round of the outer corners so they appear as a somewhat cartoonish cloud. But in doing this, it rounds of the inner corneds too, replicating a sort of bottle cap shape. How do I make it round off only the outer corners?
View 3 Replies View RelatedI want to make flyers for my band. I used to put text onto jpeg images using the Microsoft PAINT program but I want to get better at GIMP.
I really like some of the text(s) I make using the word art function in Micrsoft Excel 2010 but it seems I can't cut and paste them onto the image when using GIMP.
Is there a tutorial on putting text onto an image and making the text glow like a light saber?
how to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
I have a black background and want to make a white text which looks like if if was cut out of the black backgroundAny help out there?
View 8 Replies View RelatedI am not able to make a 3D image of a text ...rending is blocked with the message " unable to make 3D because the text is in "faux vet ".
View 1 Replies View Relatedmaking a justifiable text box in CS5?
View 20 Replies View RelatedYau know add text to a gif that has people talking to each other so you can see the dialogue.
View 4 Replies View RelatedI have a scan of an old passport and I need to get the date of issue from it. The problem is that the date is very hard to read since it is the same color as the background. What could I do to make the numbers show more clearly. I have been playing around with contrast and brightness but no luck.
View 5 Replies View RelatedI have a White Circle with a very thick black outline/border. Thick enough to write TEXT.
My exact words:
"Heart of a Lion. Mind of a Panther."
When I **ARC** this text, or any small phrase of it (like "heart of a lion" only), it will never bend the right way to fit into my black circular outline/border.
create block 3D text similar to how its done with Word Art in Microsoft Office products? I need to duplicate some text in that same style. The depth of the text extends back diagonally to the left and up.
View 8 Replies View RelatedI'm trying to make flyers, but whenever I use a large text it prints out very pixelated.
View 3 Replies View RelatedYou've all seen those images of pepto-bismol with the pepto changed to yatta or something else, but it looks authentic.
View 1 Replies View RelatedHow do I make a button with indented text on it?
Something that looks like an engraving in stone.
I have very little experience in terms of making files for webpages. I have an image, that contains display text and I need to know what the best format for webpages would be? as soon as I make a jpeg, the text turns blurry.
View 9 Replies View RelatedI was able to do the fire technique and had a great time. What I want to do is kick it up a notch and make a youth sports poster with Fire (just for my kids team). I want to have fire surrounding the kids (big wall of fire in the background) Not really sure how to do it. I know I can follow the directions with the text and take it a bit further, but hoping for a little direction to start. I have a fairly decent working knowledge with Photoshop.
View 9 Replies View RelatedI am currently building a website using photoshop and dreamweaver for a uni project. I am using photoshop to produce the images & text which I then export as JPEG's into the layers in dreamweaver. Obviously as these are only JPEG images, none of the individual text is 'live' within the site, and I cant put in hyperlinks etc.
My question is: is there a way of making the images I create 'live' when they are online, so the end user could copy text from the site, or click on a hyperlink? Either with photoshop or with imageready?