My pictures may eventually be part of a book and they must be a minimum 300dpi. I started out with Microsoft Windows Gallery and the crops and editing change the dpi logically proportionally. PSE11 drops the dpi rapidly with even a simple crop.
View 4 Repliesi've always encountered this weird problem while cropping images in photoshop. it seems to snap at a point - the crop isn't precise to the pixel. how do i fix it ?
View 2 Replies View RelatedI thought these filters enlarge or contract a selection, but I'm testing them out and all I see it what's inside the selection go white or black. Maybe I'm not understanding this.
View 2 Replies View RelatedAny way to distribute a set of variously-sized 2D objects on a 2D surface in Photoshop or Illustrator? Illustrator lets you align objects evenly along a 1D line, but I want the objects to basically fill a surface evenly.
A simple way of phrasing this is: I have a set of X objects of different size (or shape). I want them to be as close to each other as possible, but without overlapping. It should be easy for software to find the perfect composition to minimize "air gap" between them.
As a result, If I feed the program with shapes of various shape and size, I should get results like this:
wholesale-fabric-discount-store.com/images/Giraffe_Fabric.jpg (air gap between the objects is approx. mininal)
(air gap between the objects is approx. minimal)!
I use Safari version 10.7.5.When I tried to use Photoshop for the first time I received a message that my computer does not have the minimum 512 MB of vRAM and that updating the driver of my graphics card may resolve the issue.
I went to the Adobe site and downloaded Retail_256.02.25f1v1.dmg, but the message still appears.
my video card is adequate for using the 3D feature in CS6 Extended? The 3D tools don't seem to work. I get the message below. Do I need an updated video card or driver?
View 1 Replies View RelatedI've been trying to make my own panels in Configurator 3 for some time now and I posted about this problem in the Configurator -board. But it wasn't until now that I realised that this issue is a lot bigger than that: it applies to EVERY panel inside Photoshop - not just custom-built ones.
The issue that I'm having is that I'm trying to create a custom toolbar and Photoshop wont let me specify proper dimensions for it. As you might know, toolbars are slim. The original one is 30px/60px (single row / double row) - give or take. So I want my custom toolbar to be roughly the same size: 60 pixels in my case.
The problem is that Photoshop refuses to set a panel's width to anything below 132 pixels upon application startup - even if you've resized the panel before you closed Photoshop. So what I have is a 60 pixel custom toolbar that every time I start photoshop, rescales itself up to 132 pixels - and I can't get around this by setting a maxwidth value to my toolbar inside Configurator. This is EXTREMELY annoying, and there does not seem to be a workaround at all. I'm actually starting to believe that this is something that has been hardcoded into the software by the programmers at Adobe.
Also, I've seen other ppl having the same problem and afaik, the issue has NEVER been resolved.
Try this yourself: Take the navigation panel (just as an example) and make it slim. Close down Photoshop and then start it up again. The navigation panel scales up itself to 132 pixels. (You can check this with a print screen, and then using the square marquee tool to see the width of the navigation panel).
A friend has a low-end laptop with a graphics score of 3.4 and is experiencing issues attempting some filters. My laptop is reflecting 6.9 which is likely overkill, but what the minimum system should be.
If the Windows Experience graphics score is a poor predictor of minimum system graphics requirements,
I have created a few graphics for my web site using transparent background layers. On my PC, when I try to Save For Web the background always goes white. On my Laptop my images are saving with a transparent background. In both cases I am attempting to save as a .GIF. The transparency box is checked when saving.
View 3 Replies View RelatedI have designed a small gif motif for a webpage. I used paths which I then filled so it would be sharp. However, when I reduce it to the size I would like on the web page (about 45 pixels) , the edges look ragged. I can't seem to get rid of the bitmapped look.
View 2 Replies View RelatedI will add the usual caveat,I would welcome to hear viewpoints.My task is to recolour the model's top – from cream / beige to dark blue / black, but obviously I need to make sure I keep the texture.
View 4 Replies View RelatedCan this be done? If so, how?
View 9 Replies View RelatedSince I have upgraded to CS6 I've noticed that when transforming an object it does not maintain the aspect ratio even when I am holding shift while transforming. I have to each time check the link button (maintain aspect ratio)
View 6 Replies View RelatedHow do I maintain a vector doument when I paste it to photoshop CS from Adobe Reader 8 pdf where
I copied it?
I have an image that is 912px long and 1px high..There is 1px of green at each end and the the rest is white.I need it to be 150px long 1px high in total.
2px of green (one at each end) and 148px of white in the middle.
I was given an image with these dimensions:
w: 13.89 x h: 5.56 inches.
I'm being asked to make it fit these dimensions:
w: 8.5 x h: 5.47 inches
How to achieve this without the picture looking stretched, in terms of it's height. Everything looks constrained when you just do the image or canvas resize.
this is a stroke of a path of a bicycle sprocket with 32 teeth,after removing 4 teeth from 4 different parts(there is a pair of 2 different type of teeth after every 6 standard teeth,i want to remove 1 of these 6 in each of the 4 parts).
I do not know how to join up the open ends of the path to maintain the circular shape to produce a 28 tooth sprocket,the teeth size are not to change just the circle.
what the minimum distance between two 3D rectangles is. I can do trial and error using the INTERFERE command (Acad 2012) and move the 2 groups until they stop hitting each other, but I wanted to see if there is a command in ACAD that will tell me how close 2 objects pass.
I have an old pile foundation group for 4 tower legs and I wanted to see how close I could get the new pile group to the old group. I'll try to attach a dwg file with 3 options I was trying. The old group is in Cyan and the new group is Red.
I'm guessing I could use UCS and set it on one of the piles and measure to the closest old pile, but the screen gets so cluttered. Is there a way to only show a slice through the objects?
I'm trying to batch save a series of PNG animation files using the File => Scripts => Export Layers to Files action in Photoshop CS5. Each layer has a transparency and a shadow that have been converted from layer effects and "baked" into the image. I tried the batch save but it turned all of the transparencies solid with white backgrounds. Also the image size was not cropped to the dimensions of the object on each layer.
Lastly, is there a way to edit the numbering for each file? When the images were exported it created a lengthy set of numbers after each file name when all I need is a 00 padding.
Code to find minimum distance between two faces using "Minimum distance" method...
View 5 Replies View RelatedThe old issue of 'how small can we make this legal line?' has come up again.
As I understand it it's 16 lines for SD and 28 for HD in the UK. I've heard 20 lines in the US?
There's no real comparison to tv lines and Smoke's text size is there? As fonts are simply different sizes?
Most people on google searches say the only way is to know a font, say Impact at point size 20 is correct, or to use a vector scope.
Surely if you generate a white farme at pixel size 16x16 and drag this into your comp it would give you a measure of 16 lines? Is this reasoning correct?
I am using a Pipe Network for all my drainage culverts on a large industrial site. I have created all my pipes from "Create Pipes from Object", which were all feature lines. While generating the pipes, I told it to use the object as my pipe invert.
I have set up my pipe rules (i.e. minimum/maximum slope and cover) to what I want. Also when creating my pipes I assigned my design (top of sub grade) surface to them. But I noticed that it's calculating my pipe cover from the middle of my pipes.
My pipes all have the right wall thickness, etc...set in the style. Is there a setting I'm missing telling the pipe to calculate it from the top of the pipe...instead of the middle of the pipe?
I am trying to set up a dimension that starts at a minimum value and increases incrementally by 1/16" of an inch to satisfy another dimension. I've attached a pdf showing the part and the two dimensions. I need the overall thickness of the part to start at 1 1/4" as shown and as the width (Depth + 1 1/2") changes, the thickness will grow when the tongue of the part gets less than 5/8". I'm guessing this is an area best suited to ILogic, but I'm not sure how to get started.
View 3 Replies View RelatedI used to use LR 3 & 4 to build my time lapse movies using a slide duration of .1 seconds per, now in LR5 the minimum slide duration is a full second?
View 5 Replies View RelatedIt seems that in LR5 the quickest time for showing images in the slideshow is now one second.
LR4 allowed for less than one second, down to .1 second.
I have a road that I am engineering and have set up my subassemblies using the daylight standard. But i would like to force a cut section until the fill gets to 2'. so that when i have 2" of fill it will still cut my ditches.
View 2 Replies View RelatedHow can I change the minimum radius table if Autocad Civil 3D only have as a minimum 4%?
And I need to use as a minimum 2%. see attached picture.
I'm in an RFA file and can't seem to draw lines shorter than 1/32" without getting the "Element is Too Small on Screen" error. Even when I zoom in so that 1/32" is equal to the width of my monitor, I still get this error. I'm trying to draw very shallow grooves in a mullion. The attached shortline.jpg file show a line that is long on my screen, but to short for Revit, being drawn. how I can draw very short lines in the Family editor?
View 8 Replies View RelatedI want to measure the minimum distance between 2 parts. But I want Ilogic to know what parts to measure according to what i've selected.
I have something like this but its not working... gives me always this error "
Measure.MinimumDistance: No entity named "System.__ComObject" was found."
Dim oOccurrence As ComponentOccurrenceDim oOccurrence2 As ComponentOccurrenceTry oOccurrence = ThisDoc.Document.SelectSet.Item(1)oOccurrence2 = ThisDoc.Document.SelectSet.Item(2)Catch MessageBox.Show("Please select a component before running this rule.", "iLogic") ReturnEnd Try Dim doc As DocumentDim CurFileName As String oOccurrence = ThisApplication.ActiveDocument.SelectSet.Item(1) oOccurrence2 = ThisApplication.ActiveDocument.SelectSet.Item(2) distance = Measure.MinimumDistance(oOccurrence,oOccurrence2)MsgBox(distance)
I've had CS6 installed on my laptop for at least a month now. Just recently, illustrator has been opening with only the bare minimum features: the document that I've opened; the application bar without any tools; and the dropdown menus with limited functions. For instance, I can't even print.
View 3 Replies View RelatedOpen options window from menu Tools>Options (or shortcut Ctrl+J)
Go Workspace area and select Edit.
There are some options for users. And tehere is Minimum extrude facet size . What is it? How it use?