Photoshop :: Cropping To The Minimum Pixel
May 18, 2008i've always encountered this weird problem while cropping images in photoshop. it seems to snap at a point - the crop isn't precise to the pixel. how do i fix it ?
View 2 Replies
ADVERTISEMENT
Photoshop :: Cropping A Specific Pixel Size
Jan 12, 2005Suppose I have a 300px x 300px image and I need to choose a part of that image to crop to 150px x 150px without resampling. (I need that hypothetical 150px x 150px so it fits a pre-defined area in a web page layout.)
I know I can take the crop tool to the image and view the "Info" tab to get my 150px x 150px. But that requires a fine touch and some trial and error to get the exact crop I want.
Is there a way to specify a particular size to crop or select and then move that selection around in the image to find the best crop? (Photoshop 7.0)
Photoshop Elements :: Cropping / Resizing Image By Pixel Dimensions?
Aug 12, 2013I am trying to crop or resize an image that is originally 2,122 x 1,415 px | 7.1 x 4.7 in | 300 dpi. I am to crop/resize image to fit 756 x 275 px. However, I don't want to lose the whole image. I would like to use the whole image just adjust it to the dimensions.
How can I accomplish this without creating any distortion or by removing elements by cropping the image?
Photoshop Elements :: Pixel Dimensions After Cropping With (Use Photo Ratio)
Nov 24, 2012Why don't Pixel Dimensions (and Document Size) change for Image Size after cropping with "Use Photo Ratio" like it does after cropping with "No Restriction"? Using Photoshop Elements 10 and Crop Tool defaults.
View 4 Replies View RelatedPhotoshop Elements :: Crop Picture Pixel Dimensions Become 6 Bytes Width And Height 1 Pixel Each
Apr 11, 2013When I crop a picture Pixel Demensions become 6 bytes Width and Height 1 pixel each. I can no longer see the picture. How can I fix this?
View 4 Replies View RelatedPhotoshop :: Scaling Two Objects To Match Exactly Pixel To Pixel
Apr 22, 2013I have two art objects on two layers. I want to match to the pixel the two objects that otherwise could be exactly the same but one layered object was imported slightly smaller.
The scale tool has good scale handling, I just want to measure the tool spots to the pixel to gain an exact scale size factor and match sizes.
Photoshop :: Changing Somthing's Color Pixel By Pixel
May 12, 2007It blows my mind that somthing this simple isnt all that simple. I used the eyedropper tool to slect a color from another photo, then used the brush while fully magnified to change the color of each pixel.
It was coming out a weird greyish color, and I noticed that if I clicked more than once, it got darker, but so did the pixels directly around the one i was editing. So, i copied both pictures, loaded them into paint, and went to town.
It worked, but then when i copied it back into photoshop, it had a black background (there was no background in the original pictures) around the sprite I was editing. I tried to use the magic wand tool to get rid of it, but it took parts of the sprite with it, so...
Is there any way that I can edit the color of a single pixel (or hell, even a group of pixels if they share the same exact color would be nice...preferred, even) accurately? If not, what program could I use that would keep the transparent background?
CorelDRAW Graphics Suite X5 :: Getting RGB / CMYK Color Values Of A Bitmap Pixel By Pixel?
Feb 19, 2012Via VBA macro, some way of getting RGB/CMYK color values of a bitmap pixel by pixel?
View 1 Replies View RelatedPhotoshop :: Minimum And Maximum Filters
Sep 9, 2008I thought these filters enlarge or contract a selection, but I'm testing them out and all I see it what's inside the selection go white or black. Maybe I'm not understanding this.
View 2 Replies View RelatedPhotoshop Elements :: Maintaining Minimum 300 DPI
Feb 24, 2014My pictures may eventually be part of a book and they must be a minimum 300dpi. I started out with Microsoft Windows Gallery and the crops and editing change the dpi logically proportionally. PSE11 drops the dpi rapidly with even a simple crop.
View 4 Replies View RelatedGIMP :: How To Make Clean Image Without Deleting Pixel By Pixel
Mar 13, 2011I managed to remove the background, of an image,(A whit background) and put the image on top of a transparent layer. made a transparent image. When I place this image over a light color background, it looks fine, but when I place it over a dark color background, the edge of the image looks very rough and dirty, I think it's because some of the anti alias from the original image, how can I make it a clean image without going to delete pixel by pixel?
View 2 Replies View RelatedGIMP :: How Channel Mix Works Exactly For Transforming Pixel By Pixel In Java
Jul 26, 2012 We are developing an application using functionality of Gimp´s channel mixer with java.
Our problem is that we don’t Know how channel mix works exactly for transforming pixel by pixel in Java.
For example,
We have an image an do on it the next mix:
Output Channel = Red
Red=200.0
Green=0.0
Blue=0.0
For simulate that, we transform all pixels with Red Component *2 and 255 (maximum) if is greater.
Our problem is:
Output Channel = Red
Red=200.0
Green=60.0
Blue=0.0
How can I simulate that?
Photoshop :: Distribute Set Of Objects With Minimum Or Specified Distance
Mar 21, 2012Any way to distribute a set of variously-sized 2D objects on a 2D surface in Photoshop or Illustrator? Illustrator lets you align objects evenly along a 1D line, but I want the objects to basically fill a surface evenly.
A simple way of phrasing this is: I have a set of X objects of different size (or shape). I want them to be as close to each other as possible, but without overlapping. It should be easy for software to find the perfect composition to minimize "air gap" between them.
As a result, If I feed the program with shapes of various shape and size, I should get results like this:
wholesale-fabric-discount-store.com/images/Giraffe_Fabric.jpg (air gap between the objects is approx. mininal)
(air gap between the objects is approx. minimal)!
Photoshop :: Computer Doesn't Have Minimum 512 MB Of VRAM
Oct 16, 2013I use Safari version 10.7.5.When I tried to use Photoshop for the first time I received a message that my computer does not have the minimum 512 MB of vRAM and that updating the driver of my graphics card may resolve the issue.
I went to the Adobe site and downloaded Retail_256.02.25f1v1.dmg, but the message still appears.
Photoshop :: CS6 (extended) Video Card Minimum Requirements
Aug 5, 2013my video card is adequate for using the 3D feature in CS6 Extended? The 3D tools don't seem to work. I get the message below. Do I need an updated video card or driver?
View 1 Replies View RelatedPhotoshop :: Panel Minimum Size Restricted To 132 Pixels Or More?
Jul 15, 2012I've been trying to make my own panels in Configurator 3 for some time now and I posted about this problem in the Configurator -board. But it wasn't until now that I realised that this issue is a lot bigger than that: it applies to EVERY panel inside Photoshop - not just custom-built ones.
The issue that I'm having is that I'm trying to create a custom toolbar and Photoshop wont let me specify proper dimensions for it. As you might know, toolbars are slim. The original one is 30px/60px (single row / double row) - give or take. So I want my custom toolbar to be roughly the same size: 60 pixels in my case.
The problem is that Photoshop refuses to set a panel's width to anything below 132 pixels upon application startup - even if you've resized the panel before you closed Photoshop. So what I have is a 60 pixel custom toolbar that every time I start photoshop, rescales itself up to 132 pixels - and I can't get around this by setting a maxwidth value to my toolbar inside Configurator. This is EXTREMELY annoying, and there does not seem to be a workaround at all. I'm actually starting to believe that this is something that has been hardcoded into the software by the programmers at Adobe.
Also, I've seen other ppl having the same problem and afaik, the issue has NEVER been resolved.
Try this yourself: Take the navigation panel (just as an example) and make it slim. Close down Photoshop and then start it up again. The navigation panel scales up itself to 132 pixels. (You can check this with a print screen, and then using the square marquee tool to see the width of the navigation panel).
Photoshop :: Minimum Windows Experience Graphics Subscore For CS6?
Dec 1, 2012A friend has a low-end laptop with a graphics score of 3.4 and is experiencing issues attempting some filters. My laptop is reflecting 6.9 which is likely overkill, but what the minimum system should be.
If the Windows Experience graphics score is a poor predictor of minimum system graphics requirements,
Photoshop :: Canvas Pixel Size Doesn't Match Grid Pixel Size
Dec 6, 2012I'm using Photoshop CS5 and as you can see on the picture below, when I set my grid line to every 1 px, grid doesn't match canvas pixel size.
Now I'm not able to draw sharp shapes using pen tool because even if I hold shift key everything gets blurry.
AutoCad 3D :: Minimum Distance Between 3D Objects?
Mar 16, 2012what the minimum distance between two 3D rectangles is. I can do trial and error using the INTERFERE command (Acad 2012) and move the 2 groups until they stop hitting each other, but I wanted to see if there is a command in ACAD that will tell me how close 2 objects pass.
I have an old pile foundation group for 4 tower legs and I wanted to see how close I could get the new pile group to the old group. I'll try to attach a dwg file with 3 options I was trying. The old group is in Cyan and the new group is Red.
I'm guessing I could use UCS and set it on one of the piles and measure to the closest old pile, but the screen gets so cluttered. Is there a way to only show a slice through the objects?
AutoCAD Inventor :: Minimum Distance Between Two Faces
Apr 1, 2008Code to find minimum distance between two faces using "Minimum distance" method...
View 5 Replies View RelatedAutoDesk Smoke :: Minimum TV Lines For Captions?
Nov 16, 2012The old issue of 'how small can we make this legal line?' has come up again.
As I understand it it's 16 lines for SD and 28 for HD in the UK. I've heard 20 lines in the US?
There's no real comparison to tv lines and Smoke's text size is there? As fonts are simply different sizes?
Most people on google searches say the only way is to know a font, say Impact at point size 20 is correct, or to use a vector scope.
Surely if you generate a white farme at pixel size 16x16 and drag this into your comp it would give you a measure of 16 lines? Is this reasoning correct?
AutoCAD Civil 3D :: Minimum Pipe Cover
Mar 25, 2013I am using a Pipe Network for all my drainage culverts on a large industrial site. I have created all my pipes from "Create Pipes from Object", which were all feature lines. While generating the pipes, I told it to use the object as my pipe invert.
I have set up my pipe rules (i.e. minimum/maximum slope and cover) to what I want. Also when creating my pipes I assigned my design (top of sub grade) surface to them. But I noticed that it's calculating my pipe cover from the middle of my pipes.
My pipes all have the right wall thickness, etc...set in the style. Is there a setting I'm missing telling the pipe to calculate it from the top of the pipe...instead of the middle of the pipe?
AutoCAD Inventor :: Incremental Dimensions With Minimum Value?
Apr 10, 2012I am trying to set up a dimension that starts at a minimum value and increases incrementally by 1/16" of an inch to satisfy another dimension. I've attached a pdf showing the part and the two dimensions. I need the overall thickness of the part to start at 1 1/4" as shown and as the width (Depth + 1 1/2") changes, the thickness will grow when the tongue of the part gets less than 5/8". I'm guessing this is an area best suited to ILogic, but I'm not sure how to get started.
View 3 Replies View RelatedLightroom :: 5 - Minimum Slide Duration In Slideshows?
Feb 28, 2014I used to use LR 3 & 4 to build my time lapse movies using a slide duration of .1 seconds per, now in LR5 the minimum slide duration is a full second?
View 5 Replies View RelatedLightroom :: Minimum Time For Slideshow Changed In 5?
Jul 21, 2013It seems that in LR5 the quickest time for showing images in the slideshow is now one second.
LR4 allowed for less than one second, down to .1 second.
AutoCAD Civil 3D :: Minimum Fill Depth For Sub Assemblies
Jul 11, 2013I have a road that I am engineering and have set up my subassemblies using the daylight standard. But i would like to force a cut section until the fill gets to 2'. so that when i have 2" of fill it will still cut my ditches.
View 2 Replies View RelatedAutoCAD Civil 3D :: Change Minimum Radius Table
Apr 26, 2013How can I change the minimum radius table if Autocad Civil 3D only have as a minimum 4%?
And I need to use as a minimum 2%. see attached picture.
Revit :: Minimum Line Length In Family Editor?
Sep 28, 2010I'm in an RFA file and can't seem to draw lines shorter than 1/32" without getting the "Element is Too Small on Screen" error. Even when I zoom in so that 1/32" is equal to the width of my monitor, I still get this error. I'm trying to draw very shallow grooves in a mullion. The attached shortline.jpg file show a line that is long on my screen, but to short for Revit, being drawn. how I can draw very short lines in the Family editor?
View 8 Replies View RelatedAutoCAD Inventor :: Minimum Distance Between Parts With ILogic
Jul 11, 2013I want to measure the minimum distance between 2 parts. But I want Ilogic to know what parts to measure according to what i've selected.
I have something like this but its not working... gives me always this error "
Measure.MinimumDistance: No entity named "System.__ComObject" was found."
Dim oOccurrence As ComponentOccurrenceDim oOccurrence2 As ComponentOccurrenceTry oOccurrence = ThisDoc.Document.SelectSet.Item(1)oOccurrence2 = ThisDoc.Document.SelectSet.Item(2)Catch MessageBox.Show("Please select a component before running this rule.", "iLogic") ReturnEnd Try Dim doc As DocumentDim CurFileName As String oOccurrence = ThisApplication.ActiveDocument.SelectSet.Item(1) oOccurrence2 = ThisApplication.ActiveDocument.SelectSet.Item(2) distance = Measure.MinimumDistance(oOccurrence,oOccurrence2)MsgBox(distance)
Illustrator :: Adobe Opening With Bare Minimum Features
Nov 26, 2013I've had CS6 installed on my laptop for at least a month now. Just recently, illustrator has been opening with only the bare minimum features: the document that I've opened; the application bar without any tools; and the dropdown menus with limited functions. For instance, I can't even print.
View 3 Replies View RelatedCorelDRAW Graphics Suite X5 :: What Is The Minimum Extrude Facet Size
Feb 19, 2012Open options window from menu Tools>Options (or shortcut Ctrl+J)
Go Workspace area and select Edit.
There are some options for users. And tehere is Minimum extrude facet size . What is it? How it use?