Photoshop :: Minimum And Maximum Filters
Sep 9, 2008I thought these filters enlarge or contract a selection, but I'm testing them out and all I see it what's inside the selection go white or black. Maybe I'm not understanding this.
View 2 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Adding Minimum And Maximum Points In Profile Labels
Aug 13, 2013I'm looking for a way to add a marker with location & elevation data to the profile (not the bands).
Only mention i found in this forum was for civil2011 (i have 2013) and it is no longer available.
AutoCAD Civil 3D :: Minimum And Maximum Elevation In Volume Calculation Summary
Jun 30, 2012What do the data in the summary of volume calculation mean? In LDD, typically the minimum and maximum elevations are within the range of elevations where the volume is being analyzed. In my current vol calc summary it shows something that really makes me frown, e.g, min elev of -26.00 and max elev of 752. I have checked all the proposed elevations and the minimum is 720.
View 9 Replies View RelatedAutoCad :: Create Dynamic Blocks Stretches Between Maximum / Minimum Height
Apr 19, 2013I'm trying to create a dynamic block that stretches between a minimum and maximum height. The block I'm trying to create is an "Acrow Prop" which has a height that ranges between 1050-1830mm. Is there any way to set a function that will stop stretching out side of these figures?
View 1 Replies View RelatedXara :: Photoshop Filters Not Working And Removing Demo Filters
Jan 31, 2011I have hardly ever used filters for any of my work as I have preferred using Xara's native tools and effects to get what I wanted. But recently, I was inspired by some animation work which used backgrounds painted in Photoshop. They used a lot of textures which enhanced the look of the animation and so I thought I'd try to simulate it within Xara.
It works very well and I can export it as a PSD retaining the layers and Alpha channel. But here come my questions.
1. How can I remove the two Alien Skin demo plugins as I already have the full versions.
2. Why don't the native Photoshop plugins--Artistic, Sketch, etc.--seem to work?
Photoshop :: Making All Filters Work As Smart Filters
Jul 22, 2009In CS3 you could change something to make all filters act like smart filters, even though they won't. I found this worked very well, now I have CS4 and would like to do the same but can't remember what to do to make it work.
View 6 Replies View RelatedPhotoshop :: Filters Not Appearing After Download And In Filters Directory
May 17, 2009I just downloaded a bunch of filters and I dragged them into the filters directory under plugins, but when I open photoshop, none of the filters are there.
View 4 Replies View RelatedGIMP :: The Filters Menu Option Shows Only Repeat Last / Re-show Last And Reset All Filters
Nov 5, 2013I downloaded and installed GIMP 2.8.8 in Windows XP. The Filters menu option shows only Repeat last, Re-show last and Reset all filters.Nothing else in there. Where are the filters?
View 1 Replies View RelatedPhotoshop :: Cropping To The Minimum Pixel
May 18, 2008i've always encountered this weird problem while cropping images in photoshop. it seems to snap at a point - the crop isn't precise to the pixel. how do i fix it ?
View 2 Replies View RelatedPhotoshop Elements :: Maintaining Minimum 300 DPI
Feb 24, 2014My pictures may eventually be part of a book and they must be a minimum 300dpi. I started out with Microsoft Windows Gallery and the crops and editing change the dpi logically proportionally. PSE11 drops the dpi rapidly with even a simple crop.
View 4 Replies View RelatedRevit :: Schedule Filters - Multiple Filters
Mar 9, 2012I am working on a dormitory project and need to provide a required light and ventilation schedule. I have figured out how to create a schedule for each level, but I want to isolate only the Dormitories and the Kitchenette (weed out all the other rooms such as corridor, elevator, storage, toilets, showers, stairs, trash, electrical, etc.).
I tried using seclusion filters, but there are too many items to exclude and cannot fit them all into the 4 filter categories. I am trying to just get the rooms that begin with 'D' and 'K'. I tried providing the variable 'Begins With' for D and in the next line 'Begins With' K, but then nothing shows up.
Is there a way to provide information to the filter that would allow it to show only rooms beginning with D AND K? I cannot seem to get it to work. I have been playing around with separation values within one filter category (i.e. 'Begins With' D, K) but apparently you cannot add multiple variables within one of the filter items.
Photoshop :: Distribute Set Of Objects With Minimum Or Specified Distance
Mar 21, 2012Any way to distribute a set of variously-sized 2D objects on a 2D surface in Photoshop or Illustrator? Illustrator lets you align objects evenly along a 1D line, but I want the objects to basically fill a surface evenly.
A simple way of phrasing this is: I have a set of X objects of different size (or shape). I want them to be as close to each other as possible, but without overlapping. It should be easy for software to find the perfect composition to minimize "air gap" between them.
As a result, If I feed the program with shapes of various shape and size, I should get results like this:
wholesale-fabric-discount-store.com/images/Giraffe_Fabric.jpg (air gap between the objects is approx. mininal)
(air gap between the objects is approx. minimal)!
Photoshop :: Computer Doesn't Have Minimum 512 MB Of VRAM
Oct 16, 2013I use Safari version 10.7.5.When I tried to use Photoshop for the first time I received a message that my computer does not have the minimum 512 MB of vRAM and that updating the driver of my graphics card may resolve the issue.
I went to the Adobe site and downloaded Retail_256.02.25f1v1.dmg, but the message still appears.
Photoshop :: CS6 (extended) Video Card Minimum Requirements
Aug 5, 2013my video card is adequate for using the 3D feature in CS6 Extended? The 3D tools don't seem to work. I get the message below. Do I need an updated video card or driver?
View 1 Replies View RelatedPhotoshop :: Panel Minimum Size Restricted To 132 Pixels Or More?
Jul 15, 2012I've been trying to make my own panels in Configurator 3 for some time now and I posted about this problem in the Configurator -board. But it wasn't until now that I realised that this issue is a lot bigger than that: it applies to EVERY panel inside Photoshop - not just custom-built ones.
The issue that I'm having is that I'm trying to create a custom toolbar and Photoshop wont let me specify proper dimensions for it. As you might know, toolbars are slim. The original one is 30px/60px (single row / double row) - give or take. So I want my custom toolbar to be roughly the same size: 60 pixels in my case.
The problem is that Photoshop refuses to set a panel's width to anything below 132 pixels upon application startup - even if you've resized the panel before you closed Photoshop. So what I have is a 60 pixel custom toolbar that every time I start photoshop, rescales itself up to 132 pixels - and I can't get around this by setting a maxwidth value to my toolbar inside Configurator. This is EXTREMELY annoying, and there does not seem to be a workaround at all. I'm actually starting to believe that this is something that has been hardcoded into the software by the programmers at Adobe.
Also, I've seen other ppl having the same problem and afaik, the issue has NEVER been resolved.
Try this yourself: Take the navigation panel (just as an example) and make it slim. Close down Photoshop and then start it up again. The navigation panel scales up itself to 132 pixels. (You can check this with a print screen, and then using the square marquee tool to see the width of the navigation panel).
Photoshop :: Minimum Windows Experience Graphics Subscore For CS6?
Dec 1, 2012A friend has a low-end laptop with a graphics score of 3.4 and is experiencing issues attempting some filters. My laptop is reflecting 6.9 which is likely overkill, but what the minimum system should be.
If the Windows Experience graphics score is a poor predictor of minimum system graphics requirements,
AutoCad 3D :: Minimum Distance Between 3D Objects?
Mar 16, 2012what the minimum distance between two 3D rectangles is. I can do trial and error using the INTERFERE command (Acad 2012) and move the 2 groups until they stop hitting each other, but I wanted to see if there is a command in ACAD that will tell me how close 2 objects pass.
I have an old pile foundation group for 4 tower legs and I wanted to see how close I could get the new pile group to the old group. I'll try to attach a dwg file with 3 options I was trying. The old group is in Cyan and the new group is Red.
I'm guessing I could use UCS and set it on one of the piles and measure to the closest old pile, but the screen gets so cluttered. Is there a way to only show a slice through the objects?
AutoCAD Inventor :: Minimum Distance Between Two Faces
Apr 1, 2008Code to find minimum distance between two faces using "Minimum distance" method...
View 5 Replies View RelatedAutoDesk Smoke :: Minimum TV Lines For Captions?
Nov 16, 2012The old issue of 'how small can we make this legal line?' has come up again.
As I understand it it's 16 lines for SD and 28 for HD in the UK. I've heard 20 lines in the US?
There's no real comparison to tv lines and Smoke's text size is there? As fonts are simply different sizes?
Most people on google searches say the only way is to know a font, say Impact at point size 20 is correct, or to use a vector scope.
Surely if you generate a white farme at pixel size 16x16 and drag this into your comp it would give you a measure of 16 lines? Is this reasoning correct?
AutoCAD Civil 3D :: Minimum Pipe Cover
Mar 25, 2013I am using a Pipe Network for all my drainage culverts on a large industrial site. I have created all my pipes from "Create Pipes from Object", which were all feature lines. While generating the pipes, I told it to use the object as my pipe invert.
I have set up my pipe rules (i.e. minimum/maximum slope and cover) to what I want. Also when creating my pipes I assigned my design (top of sub grade) surface to them. But I noticed that it's calculating my pipe cover from the middle of my pipes.
My pipes all have the right wall thickness, etc...set in the style. Is there a setting I'm missing telling the pipe to calculate it from the top of the pipe...instead of the middle of the pipe?
AutoCAD Inventor :: Incremental Dimensions With Minimum Value?
Apr 10, 2012I am trying to set up a dimension that starts at a minimum value and increases incrementally by 1/16" of an inch to satisfy another dimension. I've attached a pdf showing the part and the two dimensions. I need the overall thickness of the part to start at 1 1/4" as shown and as the width (Depth + 1 1/2") changes, the thickness will grow when the tongue of the part gets less than 5/8". I'm guessing this is an area best suited to ILogic, but I'm not sure how to get started.
View 3 Replies View RelatedLightroom :: 5 - Minimum Slide Duration In Slideshows?
Feb 28, 2014I used to use LR 3 & 4 to build my time lapse movies using a slide duration of .1 seconds per, now in LR5 the minimum slide duration is a full second?
View 5 Replies View RelatedLightroom :: Minimum Time For Slideshow Changed In 5?
Jul 21, 2013It seems that in LR5 the quickest time for showing images in the slideshow is now one second.
LR4 allowed for less than one second, down to .1 second.
Photoshop :: Maximum Length Of Layer Name
Sep 11, 2013Just tried out the Photoshop CC Image Asset Generation and it rocks. However, I can only add up to so many characters for names of the layers. Is there a way that the limit can be lifted. I think this would be beneficial especially for all the different densities for creating android assets. Other than making the layer names super short.
View 3 Replies View RelatedPhotoshop :: Maximum Number Of DCS Channels
Apr 26, 2013What is the maximum number of DCS channels that can be used? I have a file I saved as DCS 2.0 with Black and four spot channels, no problem.
When adding a fifth channel, that channel shows with a white background even though I made a selection of only what was being used and pasted that in.
Photoshop :: What Are The Maximum Demensions For A Signature?
Sep 29, 2002What are the maximum demensions for a sig?
View 2 Replies View RelatedAutoCAD Civil 3D :: Minimum Fill Depth For Sub Assemblies
Jul 11, 2013I have a road that I am engineering and have set up my subassemblies using the daylight standard. But i would like to force a cut section until the fill gets to 2'. so that when i have 2" of fill it will still cut my ditches.
View 2 Replies View RelatedAutoCAD Civil 3D :: Change Minimum Radius Table
Apr 26, 2013How can I change the minimum radius table if Autocad Civil 3D only have as a minimum 4%?
And I need to use as a minimum 2%. see attached picture.
Revit :: Minimum Line Length In Family Editor?
Sep 28, 2010I'm in an RFA file and can't seem to draw lines shorter than 1/32" without getting the "Element is Too Small on Screen" error. Even when I zoom in so that 1/32" is equal to the width of my monitor, I still get this error. I'm trying to draw very shallow grooves in a mullion. The attached shortline.jpg file show a line that is long on my screen, but to short for Revit, being drawn. how I can draw very short lines in the Family editor?
View 8 Replies View RelatedAutoCAD Inventor :: Minimum Distance Between Parts With ILogic
Jul 11, 2013I want to measure the minimum distance between 2 parts. But I want Ilogic to know what parts to measure according to what i've selected.
I have something like this but its not working... gives me always this error "
Measure.MinimumDistance: No entity named "System.__ComObject" was found."
Dim oOccurrence As ComponentOccurrenceDim oOccurrence2 As ComponentOccurrenceTry oOccurrence = ThisDoc.Document.SelectSet.Item(1)oOccurrence2 = ThisDoc.Document.SelectSet.Item(2)Catch MessageBox.Show("Please select a component before running this rule.", "iLogic") ReturnEnd Try Dim doc As DocumentDim CurFileName As String oOccurrence = ThisApplication.ActiveDocument.SelectSet.Item(1) oOccurrence2 = ThisApplication.ActiveDocument.SelectSet.Item(2) distance = Measure.MinimumDistance(oOccurrence,oOccurrence2)MsgBox(distance)
Illustrator :: Adobe Opening With Bare Minimum Features
Nov 26, 2013I've had CS6 installed on my laptop for at least a month now. Just recently, illustrator has been opening with only the bare minimum features: the document that I've opened; the application bar without any tools; and the dropdown menus with limited functions. For instance, I can't even print.
View 3 Replies View Related