I use Safari version 10.7.5.When I tried to use Photoshop for the first time I received a message that my computer does not have the minimum 512 MB of vRAM and that updating the driver of my graphics card may resolve the issue.
I went to the Adobe site and downloaded Retail_256.02.25f1v1.dmg, but the message still appears.
I have a Nvidia GeForce 570 GTX, and I just did a clean install of the lastest driver. For some reason I only have a total of 1,251 VRAM to allocate in photoshop CS6 3D preferences. Using 3D with only 1,250 vram is pretty choppy, and if i'm not mistaken the 570 should have atleast twice as much VRAM available.
NOTE: Everything outside of 3D runs great.
My iMac has 256mb of VRAM. Where can I download a version of Photoshop CS6 that has the lower VRAM requirements?
View 2 Replies View RelatedI need to validate my CS6. I have a new computer with windows 7. My original photoshop is CS2 which I have updated to CS4 and now CS6. The new computer doesn't accepted CS2 is there any way I can validate CS6 on it.
View 1 Replies View RelatedI was working on a project and went to change to a different font and all that was there are the last 6 or so that I used. When I go to the drop down menu It doesn't show any other fonts. I know there are a lot of fonts in the computer but cannot get them on the program.
View 7 Replies View RelatedI have CS5 installed on a desktop computer that crashed and I can't get it working to deactivate CS5. I am going to purchase a new desktop and would like to install CS5 on the new computer, but it was already installed on two computers (desktop and laptop) so no activations are left. I have the Disk and serial number.
View 1 Replies View Relatedi've always encountered this weird problem while cropping images in photoshop. it seems to snap at a point - the crop isn't precise to the pixel. how do i fix it ?
View 2 Replies View RelatedI thought these filters enlarge or contract a selection, but I'm testing them out and all I see it what's inside the selection go white or black. Maybe I'm not understanding this.
View 2 Replies View RelatedMy pictures may eventually be part of a book and they must be a minimum 300dpi. I started out with Microsoft Windows Gallery and the crops and editing change the dpi logically proportionally. PSE11 drops the dpi rapidly with even a simple crop.
View 4 Replies View RelatedAny way to distribute a set of variously-sized 2D objects on a 2D surface in Photoshop or Illustrator? Illustrator lets you align objects evenly along a 1D line, but I want the objects to basically fill a surface evenly.
A simple way of phrasing this is: I have a set of X objects of different size (or shape). I want them to be as close to each other as possible, but without overlapping. It should be easy for software to find the perfect composition to minimize "air gap" between them.
As a result, If I feed the program with shapes of various shape and size, I should get results like this:
wholesale-fabric-discount-store.com/images/Giraffe_Fabric.jpg (air gap between the objects is approx. mininal)
(air gap between the objects is approx. minimal)!
my video card is adequate for using the 3D feature in CS6 Extended? The 3D tools don't seem to work. I get the message below. Do I need an updated video card or driver?
View 1 Replies View RelatedI've been trying to make my own panels in Configurator 3 for some time now and I posted about this problem in the Configurator -board. But it wasn't until now that I realised that this issue is a lot bigger than that: it applies to EVERY panel inside Photoshop - not just custom-built ones.
The issue that I'm having is that I'm trying to create a custom toolbar and Photoshop wont let me specify proper dimensions for it. As you might know, toolbars are slim. The original one is 30px/60px (single row / double row) - give or take. So I want my custom toolbar to be roughly the same size: 60 pixels in my case.
The problem is that Photoshop refuses to set a panel's width to anything below 132 pixels upon application startup - even if you've resized the panel before you closed Photoshop. So what I have is a 60 pixel custom toolbar that every time I start photoshop, rescales itself up to 132 pixels - and I can't get around this by setting a maxwidth value to my toolbar inside Configurator. This is EXTREMELY annoying, and there does not seem to be a workaround at all. I'm actually starting to believe that this is something that has been hardcoded into the software by the programmers at Adobe.
Also, I've seen other ppl having the same problem and afaik, the issue has NEVER been resolved.
Try this yourself: Take the navigation panel (just as an example) and make it slim. Close down Photoshop and then start it up again. The navigation panel scales up itself to 132 pixels. (You can check this with a print screen, and then using the square marquee tool to see the width of the navigation panel).
A friend has a low-end laptop with a graphics score of 3.4 and is experiencing issues attempting some filters. My laptop is reflecting 6.9 which is likely overkill, but what the minimum system should be.
If the Windows Experience graphics score is a poor predictor of minimum system graphics requirements,
I started a new computer with LR5, and it runs fine. But, when I imported my pics from a previous computer running LR4, all the pics loaded into the new LR without any tags or processing. How can I get that info without having ot reprocess thousands of pictures?
View 1 Replies View Relatedwhat the minimum distance between two 3D rectangles is. I can do trial and error using the INTERFERE command (Acad 2012) and move the 2 groups until they stop hitting each other, but I wanted to see if there is a command in ACAD that will tell me how close 2 objects pass.
I have an old pile foundation group for 4 tower legs and I wanted to see how close I could get the new pile group to the old group. I'll try to attach a dwg file with 3 options I was trying. The old group is in Cyan and the new group is Red.
I'm guessing I could use UCS and set it on one of the piles and measure to the closest old pile, but the screen gets so cluttered. Is there a way to only show a slice through the objects?
Code to find minimum distance between two faces using "Minimum distance" method...
View 5 Replies View RelatedThe old issue of 'how small can we make this legal line?' has come up again.
As I understand it it's 16 lines for SD and 28 for HD in the UK. I've heard 20 lines in the US?
There's no real comparison to tv lines and Smoke's text size is there? As fonts are simply different sizes?
Most people on google searches say the only way is to know a font, say Impact at point size 20 is correct, or to use a vector scope.
Surely if you generate a white farme at pixel size 16x16 and drag this into your comp it would give you a measure of 16 lines? Is this reasoning correct?
I am using a Pipe Network for all my drainage culverts on a large industrial site. I have created all my pipes from "Create Pipes from Object", which were all feature lines. While generating the pipes, I told it to use the object as my pipe invert.
I have set up my pipe rules (i.e. minimum/maximum slope and cover) to what I want. Also when creating my pipes I assigned my design (top of sub grade) surface to them. But I noticed that it's calculating my pipe cover from the middle of my pipes.
My pipes all have the right wall thickness, etc...set in the style. Is there a setting I'm missing telling the pipe to calculate it from the top of the pipe...instead of the middle of the pipe?
I am trying to set up a dimension that starts at a minimum value and increases incrementally by 1/16" of an inch to satisfy another dimension. I've attached a pdf showing the part and the two dimensions. I need the overall thickness of the part to start at 1 1/4" as shown and as the width (Depth + 1 1/2") changes, the thickness will grow when the tongue of the part gets less than 5/8". I'm guessing this is an area best suited to ILogic, but I'm not sure how to get started.
View 3 Replies View RelatedI used to use LR 3 & 4 to build my time lapse movies using a slide duration of .1 seconds per, now in LR5 the minimum slide duration is a full second?
View 5 Replies View RelatedIt seems that in LR5 the quickest time for showing images in the slideshow is now one second.
LR4 allowed for less than one second, down to .1 second.
I have a road that I am engineering and have set up my subassemblies using the daylight standard. But i would like to force a cut section until the fill gets to 2'. so that when i have 2" of fill it will still cut my ditches.
View 2 Replies View RelatedHow can I change the minimum radius table if Autocad Civil 3D only have as a minimum 4%?
And I need to use as a minimum 2%. see attached picture.
I'm in an RFA file and can't seem to draw lines shorter than 1/32" without getting the "Element is Too Small on Screen" error. Even when I zoom in so that 1/32" is equal to the width of my monitor, I still get this error. I'm trying to draw very shallow grooves in a mullion. The attached shortline.jpg file show a line that is long on my screen, but to short for Revit, being drawn. how I can draw very short lines in the Family editor?
View 8 Replies View RelatedI want to measure the minimum distance between 2 parts. But I want Ilogic to know what parts to measure according to what i've selected.
I have something like this but its not working... gives me always this error "
Measure.MinimumDistance: No entity named "System.__ComObject" was found."
Dim oOccurrence As ComponentOccurrenceDim oOccurrence2 As ComponentOccurrenceTry oOccurrence = ThisDoc.Document.SelectSet.Item(1)oOccurrence2 = ThisDoc.Document.SelectSet.Item(2)Catch MessageBox.Show("Please select a component before running this rule.", "iLogic") ReturnEnd Try Dim doc As DocumentDim CurFileName As String oOccurrence = ThisApplication.ActiveDocument.SelectSet.Item(1) oOccurrence2 = ThisApplication.ActiveDocument.SelectSet.Item(2) distance = Measure.MinimumDistance(oOccurrence,oOccurrence2)MsgBox(distance)
I've had CS6 installed on my laptop for at least a month now. Just recently, illustrator has been opening with only the bare minimum features: the document that I've opened; the application bar without any tools; and the dropdown menus with limited functions. For instance, I can't even print.
View 3 Replies View RelatedOpen options window from menu Tools>Options (or shortcut Ctrl+J)
Go Workspace area and select Edit.
There are some options for users. And tehere is Minimum extrude facet size . What is it? How it use?
Does a Sata hard disk drive of 5400rpm allows successful capture of video via Firewire. I checked the boxes which v10+ and Pro X3 but they do no state this.
I am contemplating purchasing a notebook which has a Sata HDD of 5400rpm and Intel Pentium Centrino Duo (dual core 1.83GHz) - the CPU should be fine I think but what about the HDD? I think that when I first started video editing (VS v 6 I think) that I only had a 5400rpm drive and had no problems but just wanted to be sure. Oh yes the notebook does have a firewire port.
minimum turning radius of cat 777f at 30km/hr? need to figure out the horizontal curves to use for this.we have been using 60 to 100m curves but i think it maybe smaller. small curves works with these steep terrain.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
I am working on basin areas for a very large project area When I use the catchment option, it will give me the immediate area around the point I have selected sometimes no more than a acre, and it is obvious that the contributing area extends well beyond the lines of the catchment area. Is there a way to adjust the catchment area to a minimum size so it will look beyond the immediate contribution and search for the actual basin area, or am I just wishing/dreaming?
View 9 Replies View RelatedI would like to write a routine to resize the MText limits box to the minimum size required to cover the text, for background masking purposes. From the DXF codes, I see that I can simply set code 41 to match code 42 in order to set the width. However, I cannot seem to figure out how the vertical dimension is defined. (entget) shows no change in the DXF codes after I resize the mtext box.
I do know how to figure out the height that I need, using (acet-geom-textbox), but I can't seem to figure out how to apply this height the MText entity.