Revit :: Minimum Line Length In Family Editor?
Sep 28, 2010
I'm in an RFA file and can't seem to draw lines shorter than 1/32" without getting the "Element is Too Small on Screen" error. Even when I zoom in so that 1/32" is equal to the width of my monitor, I still get this error. I'm trying to draw very shallow grooves in a mullion. The attached shortline.jpg file show a line that is long on my screen, but to short for Revit, being drawn. how I can draw very short lines in the Family editor?
View 8 Replies
ADVERTISEMENT
Jan 22, 2014
I have made a Family that is based off the Metric Structural Framing - Beams and Braces template. When I import my Family into a project and create a instance of the Family (which is a channel) the channel doesn't extend the whole distance of the geometric line. Its always 1500mm long (thats the default length in the .rfa file). See below image for my problem:
I made my extrusion inside the Left Elevation view and not inside a Floor Plan view; simply because it is easier to create the complex geometry of it. Maybe this has affected its inability to stretch to the length of the line? How can I edit my family so that the extrusion will stretch the whole length of the line/beam?
View 1 Replies
View Related
Nov 13, 2013
Why am I not able to select Line Styles in the family editor? This is the case for both creating new families and editing existing ones. See attached image for clarification
View 6 Replies
View Related
Jan 29, 2014
I'm trying to align a nested family to a reference line in my host family so that it rotates around a certain point.
I've created the reference line in my host family, locked the end point to two reference planes and then gave an angular parameter to the angle between the ref. line and the ref. plane.
I then inserted the nested family and aligned it to the ref. line. The problem is that when I flex the angle, i get a "Constraints not satisfied" error..
What could be wrong?
I'm using a generic face based family for both host and nested families...
Using Building Design Suite Ultimate 2014
View 3 Replies
View Related
Dec 12, 2013
When I save a selection in the family editor I can't seem to find the load selection button on the manage tab like you would in the project environment. The whole panel selection is not there. If I make a selection of at least two elements I get the load selection button on the modify tab. Is this as design or as forgotten?
At this moment it seems I first have to make a selection in order to load another selection.
[URL].....
and
[URL].......
View 1 Replies
View Related
May 17, 2013
I have an extrusion with a profile consisting of two offset arcs. This results in a curved surface.
I want to show a line in 2.5" from the top, bottom, and start and end edges of the curve. What I've done to accomplish this is to create two reference planes, one 2.5" down from the top of the extrusion, and another 2.5" from the bottom.
For the vertical lines, I then have to create a reference plane that is a chord of the arc of the surface, where the plane intersects the outer surface 2.5" from the edge on each side.
I have some other items that are being drawn on this curved surface, and to be honest, that's a bit of a pain. Am I missing some easier way to accomplish this?
If this was a project file, all sorts of options, but I'm not finding any in the family editor.
View 7 Replies
View Related
Jan 18, 2013
The line color of my family is not showing up. It is just a symbol and it should be red, but it shows up black. I went to the overides in the project and nothing was overridden, so I went ahead and changed the imported families override to red just to see if it would change and it still didn't change. How do I fix this? When I open the family, the lines are red, just not in the project.
View 1 Replies
View Related
Dec 31, 2013
how other people approach Revit (the joys of working as the solo Revit pioneer in the practice)I am in the middle of putting together various families - and have been experimenting with symbol lines for the detailing at reveals / heads etc.
For the moment I had simply used masked regions to create the joinery of frames, beads, architraves etc. which works fine, apart from not being able to use any fills at family level - leaving it to call-out drafting to add the detail in the project.
I tried the alternate of using Detail Components within the family (a simple rectangular joinery section) with shared parameters so that it can be driven by the host family - which allows drafting fills to be used.
It looks better and will save time placing fills later on to call-out details.
But - is there any impact on performance in doing this (every section now shows the fill when set at 'Fine') - is this a standard approach, or am I better leaving the symbol linework as hatch-free in the family itself - and leaving it all for addition in individual call-outs ?
View 4 Replies
View Related
May 23, 2011
I have a line based generic model family I use for wall framing and for some reason separate instances of the family will automatically join together when the ends are within a few inches of eachother. How the heck do I turn that option off? Why would it automatically join in the first place? I have tried to unjoin geometry and it wont select the families.
It is acting like the way walls will autojoin but there are no options to disable this. It makes something that should be simple very tedious and annoying.
Windows 7
RAC2012
View 3 Replies
View Related
Mar 4, 2014
I've created a line based family with a imported text label, but if I move the line to 45°, the text also moves 45°. Any way of keeping that text locked?
View 3 Replies
View Related
Jan 15, 2014
I have a very simple 'Metric Generic Model line based' family that contains 1 rectangular extrusion.
My Problem: Revit wont allow me to place a FamilyInstance of this family inside a (Architectural) project. When I click Architecture Tab->Component->Place a Component and select my Family I get a circle with a cross in it and are not able to place my family instance anywhere. Note this occurs in all levels/views from Site to Level 1, 2 etc.
why I can place it in a project?
View 1 Replies
View Related
Nov 3, 2011
I am making a nested family of windows and inserted the windows as shared and I need them as non shared. Is there a way to change the window from shared to non shared in the family editor?
View 2 Replies
View Related
Nov 12, 2013
I am trying to create a parametric seating row with a Generic Line Based family.
If you check the file for the Length (default) parameter, I am multiplying it by the Arm Distance (600mm) so that the pattern repeats while I stretch out the line.
=Chairs * 600 mm
I want to add a parameter for the Arm Distance linked with the actual seat so that if I make the chair wider the pattern would adjust accordingly.
=Chairs * Arm Distance3
This way I could adjust the chair width and Line Based family all at once. However, I am finding that when I add "Arm Distance3" to the equation the Line Based feature stops working.
View 3 Replies
View Related
Jan 18, 2012
This is something that used to be very easy to do in autocad (with a polyline) and checking the length on the properties bar. When I select multiple lines (chain of lines) the "length" data is greyed out. I hate having to measure every segment separately!
View 9 Replies
View Related
Jan 2, 2014
I keep getting this minimum segment length message after running tubing routes. I've already configured the tube style and entered the minimum length I want. I place tube fittings before I run tubing, so I don't include fittings/couplings in my tube style. The lengths of the segments are equal to or longer than the segment rule I entered, so I'm not sure why I'm getting this error message. I also get a message saying that a segment will violate the rule once fittings are placed, even though I've opted out of using fittings in the style. To get around this error I've been having to go into each route and edit the sketch to make the problem segments longer.
HP Z400 Workstation
Intel Xeon @ 3.33GHz
12.0 GB RAM
Windows 7 64-bit
Inventor Pro 2014
View 9 Replies
View Related
Jan 25, 2012
When I use Derived Route I get "Minimum Length Violation(Too short to continue)". How can I fix it. Is there any parameter that I can define minimum length.
View 7 Replies
View Related
Jan 8, 2013
Is it possible to change the length of a line based on the length of an attribute?
I'd like to make the line a MINIMUM length of X" (I haven't decided how long yet--but know I'll need a minimum). But then after the user fills in the attribute, I'd like the length of the line to change to the length of the attribute plus a small amount (again, I haven't decided yet how much extra).
View 3 Replies
View Related
Mar 16, 2012
I was wondering if there is a way with DB's to have a line "follow" or "grow" with the content/value length of an attribute. Maybe some method of linking the attribute width to length of the line? Essentially, it would work just like turning on the underline setting when typing in mtext editor (or any program with an underline option for that matter), expect that the line could be placed anywhere, and would not have to reside directly below the text.
View 5 Replies
View Related
Mar 29, 2012
After editing a value in the Family Table in the Content Center Editor I still get the old value. I tried to refresh this Content Center part (as administrator) but without succes.
In the logfile the error message is: "Failed: Unable to create part file. Unknown error."
Earlier (probably with older version of Inventor) I was able to refresh.
Is this a bug, or has this something to do with false settings
Autodesk Inventor Product Design Suite 2013 SP1.1
View 4 Replies
View Related
Sep 20, 2012
I am trying to give an Expression like sqrt({Jx}/{Section}) in column properties in family table editor. but its not working.
Find the attached image .....
Inventor Professional Suite 2010
Windows 7
View 5 Replies
View Related
Oct 27, 2009
I have been practicing using a older book(copyright 1990) and it has some decent exercises in it. I was able to do this one but it seems I can"t find the proper way to do this..First drawing a line a certain distance..ortho on,click the first point anywhere,move curser to the left and click again. that gives me a line at 180 degrees at what ever length..Line command again starting at the second point of the first line..after clicking that point,I type in @2.38<150 that gives me a line2.38 long at 150 degrees..now how do i make a third line relative to the second line so that the angle is 75 degrees and a certain length..the picture shows what I am trying to draw..using the polar cordinates you get an angle based off the UCS( which is set at world) when you try to draw the third line ..that makes the angle between line 2 an 3 not the angle that I want..To make the drawing,I rotated the ucs -30 degrees..But there has to be a better way than that..
View 9 Replies
View Related
Feb 17, 2012
I lost the ruler to adjust the width and length of mtext objects in the editor settings.
How can I get this ruler back?
View 2 Replies
View Related
Jul 18, 2013
In Revit 2013 I attempt to load an item from the Family but I find that the “Load Family” dialog box does not appear. how to get it to cooperate? Even starting a new project the load family dialog box does not appear. I have done: 1) system restore, 2 ) repaired install, 3 ) re-installed, 4) uninstalled and reinstalled from scratch but still the problems persists on this machine. all other office PC’s with Revit 2013 behave.
View 2 Replies
View Related
Jul 5, 2013
I've attached a simple RVT file with a family inserted and the front view active. I need to rotate the family 90 degrees but Revit reports the following error:
"Can't draw because Work Plane is at a very sharp angle in this view. Go to another view or redefine the Work Plane."
View 2 Replies
View Related
Mar 14, 2012
I have several window types in my project. Let's say that the window is 3'-0" wide by 4'-8" high - Mark #1. I want to group three of these windows and schedule the group as Mark #2 - not three separate #1 windows. How do I set up the three windows together to become a single window schedulable for the entire opening of the three windows grouped together so that the opening would read 9'-0" wide?
View 6 Replies
View Related
Jan 15, 2014
Is there a way to load, for example, a wall created in a different project, into another project?
View 1 Replies
View Related
May 21, 2013
I downloaded a grab bar family that I thought looked very good. But then I tried to place it on the toilet stall portion (I also downloaded stall partition families). When I tried to place the grab bar, it wouldn't place -- I believe because the grab bar is WALL BASED.
So now the question is how do I go about placing a grab bar (or anything else) that is not wall based so that I can use it with the stall portion? I had tried to use face based but couldn't get that too work.
View 5 Replies
View Related
Mar 28, 2012
Im try to crop .rft format but i cant crop my family model in project file. Then how to explode family in project file.
View 9 Replies
View Related
Apr 9, 2013
I would like to create family type with drop down list as shown in the image.
How it is created and for what?
View 4 Replies
View Related
Nov 9, 2011
Recently, My revit does not load families. The process I use is the following:
In the Build area of the home ribbon, I select the Component button. I going to the Place component ribbon. When I select Load Family form the Mode portion of the ribbon, the properties box pops up. It is locked at this point and I cannot do anything but hit escape. The program functions just fine in all other aspects. I have used a vanilla project to see if the project I am working on is corrupted and I get the same results.
View 1 Replies
View Related
Jun 10, 2013
I am trying to create a custom planter based off some line work that I did in my project. It has a curve. basically what I have done is created the line work on plan but now I want to use that curved line to create my family. which I am thinking I can create a profile and then sweep it on those lines. The problem is I can get the line work to the family.
View 2 Replies
View Related
