this is a stroke of a path of a bicycle sprocket with 32 teeth,after removing 4 teeth from 4 different parts(there is a pair of 2 different type of teeth after every 6 standard teeth,i want to remove 1 of these 6 in each of the 4 parts).
I do not know how to join up the open ends of the path to maintain the circular shape to produce a 28 tooth sprocket,the teeth size are not to change just the circle.
I was given an image with these dimensions:
w: 13.89 x h: 5.56 inches.
I'm being asked to make it fit these dimensions:
w: 8.5 x h: 5.47 inches
How to achieve this without the picture looking stretched, in terms of it's height. Everything looks constrained when you just do the image or canvas resize.
Is there a way to remove redundant points whilst maintaining the exact shape of the path?
After using Pathfinder or Expand there are often many redundant points which can't be removed using Simplify or Unite.
The VectorScribe plugin has a Smart Remove Points feature which is exactly what I want. I'm presuming the only way I can get that feature is to buy the plugin.
A simple example is shown below: The path is part of an exact circle and I need to remove one of the anchors.
When I import, or drag and drop, photos they are reduced to 400x300 pixels even I chose "Import as original, which was 3445x2584. So, when export the image back as a JPG all I get is the reduced image. how can I keep my original image size?
View 3 Replies View RelatedIs there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
I'm trying the trial version of Photoshop CS6, and I'm wondering whether or not it's possible to change the length of a shape with the amount of text entered into it, with the text still being editable? For example, if I had typed in 'hello', the size of the shape should be just big enough for the text to fit inside, without me having to change anything. On the other hand, if I typed in 'good morning', would I be able to make it so the size of the shape would change for the text to fit without having to use the transform tool?
I'm trying to make annotations for a video, and it would be annoying to have to transform to the correct measurements every single time.
i currently have a logo that is 460X440 pixels and 12.17cmsX11.69cms and the resolution is 96 pixels per inch.
i am wanting to change it into a 2cm X 2cm avatar that is less than 6K in size,
how do i do this? everything i try makes the output file about 24k in size.
the reason i am doing this is the forum i regularly post on has a max avatar size of 6k.
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
I'm not sure what I did to make this happen or how to change it back, but for some reason when I change the size of an object/line it changes the stroke weight as well. (For example, if I drew an ellipse with stroke weight 2 pt, and then increased the size the stroke weight would be 2.856 pt or some such number instead of 2 pt.) How to change this back?
View 3 Replies View RelatedI want to change the size of the image in Gimp to 3957x4429 px (67x75 cm) at a 150dpi (the image we have has a 300 dpi.) When i do this in image - print size it keeps changing the width.
The system is not allowing me to get the picture a few cm larger. Is there any way I can overwrite this?
It is possible to generate the model of only one sprocket, without drawing the whole transmission?If possible, how to generate this model.
View 3 Replies View RelatedI have a project in where I need to create a 3D bicycle.
View 6 Replies View RelatedI am in the process of compiling a parameter driven sprocket. I just download the model from the CBLISS website these items are spreadsheet driven and they conflict with the MRP system interface we are using here.
All my formulas seem to be going nicely until I have to enter the square factor into the formula. [i.e. (d0)^2 or powr ((d0):2)]
It just will not accept syntax function. I have an idea the problem my lay in the unit types in the equation or the previous equations.
The formula I am trying to achieve is
Hr = sqrt(Fr^2-(1.4ul*DR-0.5ul*PITCH)^2)
Refer to JPG for clearer picture as to where I am coming unstuck.
Im trying to figure out how to create a chin sprocket assembly like shown were the chin is connected to an object and as the sprockets are driven it moves the object up and down.
View 3 Replies View RelatedIs there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies View RelatedI'm trying to alter this photo of a mango to make it cube-shaped (sort of like this) without changing the image's background too drastically. I've been doing the occasional Photoshop here and How can I cube this mango?
View 6 Replies View RelatedI've created a round rectangle. I want the shape to be black with a white border. However whenever I finalize and save, my white border disappears and I'm just left with a black shape. Edit > Stroke is'nt highlighted.
Whenever I change the colors from black and white I dont seem to have this problem. How can I change/modify the BORDER COLOR of my shapes?
I can't seem to figure out how to change a custom shape. Shape: 35px H x 700px W rectangle with vertical gradient. What I want to do: I am wanting to reshape the left 100 or so pixels so that the left side curls up and comes to a point approx 50px above. Best way to describe would be the shape would look like a candy cane laid on its side.
NOTE: I don't have a problem creating the shape. I have a problem with getting the gradient to follow through with the shape - the gradient wants to change according to the heigth of the curl. So far the only "attempted" way was using the liquify feature but I can never draw a good circular shape by hand.
I am trying to draw a bicycle frame in 3D. What is the best functions to use? I first drew the frame in 2D using regular lines. Next I drew a circle at one of the intersection points, then used Sweep. I repeated the steps but with a smaller circle.
Next i was planning to Subtract the smaller tube with the large to create a tube but I am having trouble selecting to subtract to make a hollow tube. I'd like to evaluate to see if there is a easier way to draw so that it is easy to modify down the line.
How can I create bicycle gears that have different numbers of teeth but all have an inter tooth distance (distance between the teeth centres) of 12.7mm?
My attempt at a solution and problems encountered:
I made a bicycle gear by patterning a small circle around a large circle then trimming lines (see attached sketch), but this method requires me to estimate the diameter of the large circle before patterning and then keep modifying this slightly until I get an intertooth distance as close as possible to 12.7mm. So I can't get exactly 12.7mm. In my sketch I have labelled this intertooth distance I refer to by construction lines.
If I type in something like "Book" then highlight it with the selector tool. Then go to Arrange> Convert to Editable Shapes and go back and unclick/click it has not changed into an editable shape.
View 6 Replies View RelatedI created a mold design of bicycle frame. when i generated core and cavity, i faced some problems.
it said,
1. there are small gaps between these edges (edge set 1, maximum gaps is 25.16917 mm. edge set 2, maximum gaps is 25.16917mm)
2. runoff surfaces penetrate the porduct (surface 1, surface 2, until surface 6)
below this post i attach the file.
Is it possible to create a new view port with 5 or more grips, or modify an existing rectangle. i have search everywhere but still no joy.
View 9 Replies View RelatedI have been working on a book cover for a client and was asked to modify a capital letter in the chosen font. The letter "S" had a curly q at the top that needed to be removed. I converted the letter to an editable shape and deleted the offending nodes. Along the way I had to break the points and then reconnect. When I broke the points, Xara split the shape into 2 layers for some reason so I could not rejoin the points later. I ended up combining the layers and was able to rejoin the nodes that way.
The problem I had was that when everything was reconnected, I could only color the outline, the shape would not fill. I ended up having to export as a PNG to Photoshop, created an adjustment layer and painted it in. Everything looks great BUT I would have preferred to just reconnect the nodes and fill the letter in Xara.
When I choose the Four-Part Fill, I get a rectangle. I want to change the shape of the fill by moving each of the four corner control points independently. I haven't been able to figure out how to do this. Is there a keyboard shortcut that allows one to select each control point and then move it independently?
View 9 Replies View RelatedI went through all this hard work of making a blend shape. and I forgot to name it properly.
can I rename it in the input channel?
I know I can just set it to 1, dupe, and add it again. but it would be nice to just quickly give it a name....
I want to add a Rectangle with a specific size in CM but Photoshop won't allow me to enter a value above 25.4 cm (my canvas is 300cm x 300cm).
I can manually draw the shape as big as I like, which is annoying and I need to know why it's doing this, plus it would really speed up drawing accurate shapes.
I need to get to know the size/weight of a custom shape, measured in points. I basically need to get to know which of two almost similar shapes are the physically biggest.
View 2 Replies View RelatedDon't use it often but when you need it you need it. Problem is for some reason I can no longer change the shape or size. Just get a square block about a 1 x 1 pixel and I'm stuck with it. Go into brushes or where ever and everything is greyed out.
View 9 Replies View RelatedSetting a stroke profile (variable line width) on a closed shape changes the stroke width from narrow to wide. I would like to have the "wide" width in a different place and a "narrow" width somewhere else. I guess a way to do this would be to change the node orders of the closed shape?
View 1 Replies View RelatedI got this error many different times and the problem still continues.
When I change the stroke weight from the Strokes menu arrows or by scroll, this action changes my path's shape and distorts it. You can see the problem below:
I got similar errors when scaling a couple of times. But this one looks just impossible to me.