Im trying to figure out how to create a chin sprocket assembly like shown were the chin is connected to an object and as the sprockets are driven it moves the object up and down.
View 3 RepliesIt is possible to generate the model of only one sprocket, without drawing the whole transmission?If possible, how to generate this model.
View 3 Replies View RelatedI am in the process of compiling a parameter driven sprocket. I just download the model from the CBLISS website these items are spreadsheet driven and they conflict with the MRP system interface we are using here.
All my formulas seem to be going nicely until I have to enter the square factor into the formula. [i.e. (d0)^2 or powr ((d0):2)]
It just will not accept syntax function. I have an idea the problem my lay in the unit types in the equation or the previous equations.
The formula I am trying to achieve is
Hr = sqrt(Fr^2-(1.4ul*DR-0.5ul*PITCH)^2)
Refer to JPG for clearer picture as to where I am coming unstuck.
I can't create a dwg from an assembly because it's telling me that "The factory must be updated before views of it's members can be used". What does this mean and how do you update the factory?
View 4 Replies View RelatedWhen creating a new part in an assembly and I select a face of an existing component, how does Inventor determine the orientation and origin of that new part? I understand how Inventor works when I select the plane/origin of a part or pick out in space in the assembly.But the placement based on the face of an existing component seems random..
I normally do not like creating parts inside of an assembly but I was trying some new workflows.
I am using IV 2010. I have an assembly that is made up of subassemblies and individual parts. Some of the subassemblies share the same parts. I would like to know when I create the BOM for the top level assembly if it can show parts only with no assemblies. I want to get the BOM to combine like parts from all subassemblies in one list. I have tried to use the part only option and it still puts subassemblies in the BOM and breaks the parts out per subassembly.
View 1 Replies View RelatedI am trying to create an assembly with different representation. let me take a small example and explain. I am trying to create an assembly with say 2part. 1. A circular base plate of 6in dia (An assembly by itself in my case). 2. A plate on top of that say 4in,3in, 4,5in.
in one representation I want to have the base plate and 4in plate on top with say 0.2in holes going all the way through on 1in bore circle.
In another representation I want to use the same base plate with 3in plate on top with 0.2 in holes on 1.5in bore circle. When I am creating an extrusion in one representation view it is still showing on the other representation too.
I want to know if there is a way to turn off the feature (representation wise) so that when i turn on the 4in plate i can see the 4in holes and when i turn on 3in plate i can see the 3in holes.
I don't want to have multiple ipts for the base plate as i am dealing with an assembly for the base plate. the only difference is the locations of the holes for different top plate. I want to create just one top level assembly.
I'm trying to design a linear bearing that is composed of a billet of material to which six ball bearings are bolted. I was able to create a part representing the ball bearing from the manufacturer's dimensions. I then modeled a lock washer as a part, then an assembly consisting of a ball bearing and a lock washer. I then created an assembly from that assembly, with six of these ball bearing/lock washer assemblies in the desired orientations.
Now that I have the ball bearings oriented in space the way I need them, I need to model the billet to which they will all mount. I did things in this order because the ball bearings are metric, yet the rest of my design is in imperial units, and it just seemed easier to orient the bearings (which will interface with yet another assembly that I have yet to design) first.
I'd like to create my billet using the assembly as a reference. The assembly will tell me where I need holes in the billet to mount the bearings, where I need to cut out material for clearances, etc. I can't figure out how (or if) I can import my assembly into my part file, or what other tools are available to accomplish this task.
I'm attempting to model something similar to this. I've got the six bearings oriented in space, now I need to make the block to which they mount.
I need to create an exploded view of an assembly to show how it's supposed to be put together. "Hey, why not use the slick presentation feature in Inventor? I've already got the model!" It's not working out to be that slick.
Outlined in red, is the "wrong" trail that Inventor put in by default. I added the highlighted trail, which is what I want and reflects how things actually go together. How do I get rid of the one I don't want? Hide turns off both of them. Delete deletes the tweak. All I've found was a workaround where I hide the line in the drawing.
I created a general assembly (GA) and placed several parts and assemblies. After I realized there are too many parts and assemblies in the GA to reasonably place on a drawing. Now I want to remove some parts and create sub-assemblies. Is there an easy proceedure to select some parts in the GA and insert them into a new sub-assembly and (hopefully) keep the constraints intact?
View 2 Replies View RelatedI want to create some modules for a platform deck. The modules are made of C5x6.7 channels in one direction, L2x2x3/16 angle stiffeners in the other direction, and 3/16" deck plate on top.
My "drivable" parameters will be length and width.
The modules will all be different sizes, so I need to be able to have every instance of the assembly be different.
The workflow I was attempting to do before I got stuck was this:
1. Create a skeleton part (just a sketch) with Length and Width parameters.
2. Insert in an assembly and use frame generator to build the structural shapes (channels and angles)
3. Insert another part (the 3/16" plate) that can reference the length and width and adjust to be the correct module size.
Is there a way to make parts in an assembly all follow the same parameters? More importantly, can each instance of this assembly show up differently and be adjustable when I place these modules in my main assembly?
I don't know much about iParts - but it looks like an iPart lets you choose from predefined dimensions - I want something that I can custom input any size I need.
I am trying to create ADSK file for an assembly created in Inventor so that I can export it to Autodesk Revit. How can this be done?
View 5 Replies View Relatedhow to create a simulation of the balls in the assembly? I need a simulation of the assembly on the similarity as in the picture
View 3 Replies View RelatedI created an assembly of parts and then converted my assembly to a weldment. I then realized that I need to create a sketch and make an edit to my assembly. The sketch command is greyed out however. I did some trouble shooting and realized that once I converted it, it no longer allows me to make edits. Is there anyway I can get around this? do I now have to re-create the entire assembly to make this edit at the assembly level? If so this would really suck since it is a rather large assembly. I see saving as a new IAM doesn't work as well.
View 5 Replies View RelatedI am looking for a model of an engine to create an assembly animation. I do not need any specific details, just a working model with all of the parts neccessary.
View 9 Replies View RelatedIm new in Inventor and I have a problem with creating a hole through two parts beacause they are a bit angled. Im creating the holes part by part and Im using the work point method. But unfortunately this is the result:
Im wondering if there is any other methods so I can get the holes coinciding?
if there is any way to create a new 'FeatureBasedPattern' within an assembly document. I have 2 assembly occurences - parts. In the Part1 i created a RectangularPattern of workpoints. The Part2 is going to be used in the new pattern. I tried the following VBA code, but it doesn't work.
Dim oPart1 As ComponentOccurrence
Set oPart1 = oAssDef.Occurences.Item(1)
Dim oPart2 As ComponentOccurrence
Set oPart2 = oAssDef.Occurences.Item(2)
Dim oTG As TransientObjects
Set oTG = ThisApplication.TransientObjects
[code]...
The Call function breaks with: "Invalide procedure call or argument". I also tried "Set oAssemblyPattern = oAssDef.OccurencePatterns.etc...." instead of Call function, but with the same result. Same error for declaration change of "oAssemblyPattern" to "FeatureBasedOccurrencePatternProxy".
Im after programmatically mating 2 components together in an assembly. My stages are as follows:
1)Create New Assembly
2)Add .ipt's
3) One-by-one, mate all the parts together (each part has a plane named "WPStart" and "WPEnd". In each part im after the WPStart being flush mated with the WPEnd of the 2nd part - see image attached. In addition I would like to mate al the XZ planes in each of the parts fluch together and likewize the YZ planes.
3) Mate the parts together
Dim FlushConst As FlushConstraint
FlushConst.AffectedOccurrenceOne = oAssyDoc.ComponentDefinition.Occurrence.Item(1).Workplanes.ItemByName("WPStart") <--------
FlushConst.AffectedOccurrenceTwo = oAssyDoc.ComponentDefinition.Occurrence.Item(2).Workplanes.ItemByName("WPEnd") <--------
I've got some IGES files, which I want to place into an assembly, and then create a drawing of the assembly.
If I open the IGES and place it in a drawing it works. If I create an assembly, place the same part, and then try and put the assembly into the drawing it doesn't work.
Attached is the IGES file. I'm using Inventor 2011.
I am trying to create a loft to shaped a back cushion and then send the loft to all parts. But I do not see Loft as an option under assembly level.
View 5 Replies View RelatedIn an assembly document, I try to add a MateConstraint between male and female side of an 45 degrees elbow. The male side is built on the XZ Plane and Y Axis And I try to create a workplane on the female face.
But a got an error with the last line of code. Here's my code (vb.net code) :
' Get application object
Dim app As Inventor.Application = GetObject(, "Inventor.Application")
Dim doc As Inventor.AssemblyDocument = app.ActiveDocument
[Code] .......
To increase the speed of production, I like to generate idws of flat patterns from assembly. The following iLogic rule work fine inside a metal sheet (I had to create flat pattern before run this rule).
Imports Inventor.ViewOrientationTypeEnumImports Inventor.DrawingViewStyleEnumDim oDrawingDoc As DrawingDocumentDim oPartDoc As DocumentDim oSheet As sheetDim oTG As TransientGeometryDim oView1 As DrawingViewDim oOptions As NameValueMapoPartDoc
[Code] ........
But from an assembly there are some problem ( firstable I'm not an expert of vba and ilogic)
Imports Inventor.ViewOrientationTypeEnumImports Inventor.DrawingViewStyleEnumfmgr = ThisApplication.FilemanagerFor Each file In fmgr.filesdoc = ThisApplication.Documents.ItemByName (file.fullfileName)compdef = doc.ComponentDefinition' For each assembly or subassembly'If (doc.documenttype = 12291) Then For Each occ In compdef.Occurrences' For sheet metal or part
[Code] ........
On one part, I have a bore hole drilled on a curved surface so the hole is actually an ellipse.
Now the other part I am trying to constrain together is the pipe that will be welded into the bore hole; so that is a simple circular pipe.
The issue is that the pipe has to be inserted 0.25" above the interior of the bore hole to allow for room for the weld. In order to do this I have tried to create a plane attached to the 3D ellipse and then constrain the pipe to be 0.25" above that plane. The problem is I cannot seem to create a plane attached to the 3D geometry; I cant even find a way to attach points, or pick the center point of the bore hole.
How to create a plane on 3D geometry and link it to said geometry. I'm using 2012, if that is necessary information.
I'm trying to create an assembly and there's one part of one piece I'm struggling with. I attached a quick sketch I made of it. I'm struggling with the bend portion that I lined in. If my drawing doesn't make sense, that piece is 5" long, the bend is 5/8", and it's a cylinder. I'm sure it's really easy but I'm blanking. I've tried the bend tool to no avail.
View 3 Replies View RelatedI am fairly new at animation. If I want to simply create an animation of an assembly just simply rotating in 3D space which I then can import in Showcase for a presentation, how would I do this in Inventor?
View 4 Replies View RelatedI create an IDW view of a subassembly by inserting the parent assembly, make it a non-associative view, then turn off visibility of unwanted subassemblies. When later working in the model and adding a part to one of the non-visable sub-assemblies, that part becomes visable in the IDW views in which the subassembly was non-visable, requiting me to edit all veiws in which the subassembly was non-visible. This can be quite a number of instances. Is there a way to prevent this?
I may have a more fundamental workflow problem: I create assemblies composed of subassemblies that need to be detailed sperately. I have found that in order to correctly create a structured BOM and to have the ballon lables to correspond to the structured BOM, I create the drawing views as described above. If I would just insert the subassembly to detail it, I don't understand how to get it to relate the balloon labels in the subassembly view to my master BOM.
I have 5 separate .ipt's that were created within a major assembly. Is it possible to generate a subassembly of those 5 separate .ipt's within the major assembly keeping all the constraints?
OR
Do I have to start a separate .iam file and import each .ipt and regenerate the complicated constraints all over again?
In order to reflect production process, I have to create holes on the bent pipe at assembly level after 2 bent pipes are welded to the straight pipe. Now when I suppress holes, it does not suppress only at LOD or view rep but throught the whole assembly.
Is it possible to suppress features such as hole using LOD or view rep, which are made at the assembly level? or I have to use another method? See below in highlighted.
From a VB.Net program, I'm trying to create a dimension on a drawing document between two parts in an assembly. I can get the parts using component occurrence. The line marked below throws the following error: The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG)).
As you may see, I have allocated memory for both "Edge" and "Face" (Dim oEdge1 As Face) albeit one is commented out. Attached is the screen shots from the attribute helper add-in. In it, you will notice that the attributes are of type: "Face".
Public Sub CreateDrawingDimension(ByVal Part1 As String, ByVal Part2 As String, ByVal AttName1 As String, ByVal AttName2 As String)
' Get the Active Drawing document
Dim oDrawDoc As Inventor.DrawingDocument
oDrawDoc = invApp.ActiveDocument
[code]........
Is it possible to create multiple frames in a single assembly environment? (i.e. Frame0001, Frame0002)
The members all lump together in one Frame regardless of when they are created in the workflow.
I know there is a workaround for this by making each frame in its own assembly...but that will be more cumbersome than it is worth in this application.
Right now I have just created folders in the Frame0001 to sort things out, but the folders are not very flexible as far as moving things in and out or reordering...it is a pain.
I've used the Frame generator to create my existing building columns, existing platform columns, and existing handrail. I'll be using the frame generator pretty soon here to build a new platform, which I would love to keep separate from the existing steel.
I suppose I could save the current assembly and insert it into a new one so I can add the new equipment, but I'd rather avoid large subassemblies like that. Seems like it would be a lot easier to just have an option to create Frame0002.
(Inventor Professional 2014 Update 1, Windows 7 Professional)
How to create a revolve surface in an assembly for the purpose of measuring a flow area through a specific area? See the attached JPG, I basically have a conical internal diameter with a pin protruding into it..... I need to measure the flow area as shown in the sketch attached here. the way I have this shown in the attached JPG is the way that we had previously performed this in Pro-e.
View 9 Replies View Related