I'm trying to alter this photo of a mango to make it cube-shaped (sort of like this) without changing the image's background too drastically. I've been doing the occasional Photoshop here and How can I cube this mango?
View 6 Repliesi dont have a pic.I seen a mouth on some fruit and you would think it was made for real.
I tried my own and i have problems making it look natural.
I've created a round rectangle. I want the shape to be black with a white border. However whenever I finalize and save, my white border disappears and I'm just left with a black shape. Edit > Stroke is'nt highlighted.
Whenever I change the colors from black and white I dont seem to have this problem. How can I change/modify the BORDER COLOR of my shapes?
I can't seem to figure out how to change a custom shape. Shape: 35px H x 700px W rectangle with vertical gradient. What I want to do: I am wanting to reshape the left 100 or so pixels so that the left side curls up and comes to a point approx 50px above. Best way to describe would be the shape would look like a candy cane laid on its side.
NOTE: I don't have a problem creating the shape. I have a problem with getting the gradient to follow through with the shape - the gradient wants to change according to the heigth of the curl. So far the only "attempted" way was using the liquify feature but I can never draw a good circular shape by hand.
this is a stroke of a path of a bicycle sprocket with 32 teeth,after removing 4 teeth from 4 different parts(there is a pair of 2 different type of teeth after every 6 standard teeth,i want to remove 1 of these 6 in each of the 4 parts).
I do not know how to join up the open ends of the path to maintain the circular shape to produce a 28 tooth sprocket,the teeth size are not to change just the circle.
If I type in something like "Book" then highlight it with the selector tool. Then go to Arrange> Convert to Editable Shapes and go back and unclick/click it has not changed into an editable shape.
View 6 Replies View RelatedIs it possible to create a new view port with 5 or more grips, or modify an existing rectangle. i have search everywhere but still no joy.
View 9 Replies View RelatedI have been working on a book cover for a client and was asked to modify a capital letter in the chosen font. The letter "S" had a curly q at the top that needed to be removed. I converted the letter to an editable shape and deleted the offending nodes. Along the way I had to break the points and then reconnect. When I broke the points, Xara split the shape into 2 layers for some reason so I could not rejoin the points later. I ended up combining the layers and was able to rejoin the nodes that way.
The problem I had was that when everything was reconnected, I could only color the outline, the shape would not fill. I ended up having to export as a PNG to Photoshop, created an adjustment layer and painted it in. Everything looks great BUT I would have preferred to just reconnect the nodes and fill the letter in Xara.
When I choose the Four-Part Fill, I get a rectangle. I want to change the shape of the fill by moving each of the four corner control points independently. I haven't been able to figure out how to do this. Is there a keyboard shortcut that allows one to select each control point and then move it independently?
View 9 Replies View RelatedI went through all this hard work of making a blend shape. and I forgot to name it properly.
can I rename it in the input channel?
I know I can just set it to 1, dupe, and add it again. but it would be nice to just quickly give it a name....
Setting a stroke profile (variable line width) on a closed shape changes the stroke width from narrow to wide. I would like to have the "wide" width in a different place and a "narrow" width somewhere else. I guess a way to do this would be to change the node orders of the closed shape?
View 1 Replies View RelatedI got this error many different times and the problem still continues.
When I change the stroke weight from the Strokes menu arrows or by scroll, this action changes my path's shape and distorts it. You can see the problem below:
I got similar errors when scaling a couple of times. But this one looks just impossible to me.
I've created a 2-point persective grid on top of a cube (see image below). I'm tyring to recreate the cube and have started by inserting some purple squares into the right side of the perspective grid. I've drawn an ellipse at the corner of the original cube that I'm trying to copy, to indicate where I need my squares to stretch to.
How I can stretch my purple squares in perspective so that they match the end of the orignal cube as indicated in the image below? I've tried skewing but this doesn't skew in perspective.
I have a scene with an object with multiple blend shape targets. I'm not using custom attributes to control these targets (since doing that makes the Blend Shape Editor nonfunctional). I'm just directly changing the value in the channel box's 'Input' section, under 'blendShape1'. By typing in the number directly, I can get it to work with any number I want, but if I try the Maya Cntrl-drag method to interactively change the number, I'm stuck between values of 0 and 1. Is there any way to change the min and max of these attributes? Its strange that I can type in whatever I want and it will work, but cntrl-dragging does not work that way.
View 1 Replies View RelatedIdea is to make halftone effect but with hexagons or triangles (for example) instead of circles... don't know if there ever was some plug-in (or it is some complicted programing) for doing this but i saw similar stuff so...
i know i can mask some patterns but all the shapes has same size then so that's not it...many thanks in advance...
In Photoshop CS6, when you have a shape layer with a layer mask, and the two are not linked together, and the layer mask is selected, you should be able to scale the layer mask independently of the shape. What actually happens is the shape gets scaled and the layer mask stays untouched. In fact, even if you option-click on the layer mask to show the mask by itself, and then try to scale it, you still end up scaling the shape instead of the mask. Even if you go as far as to make a pixel selection of the layer mask and attempt to scale the pixels, the shape still gets scaled and the layer mask still stays put! Unbelievable!
This works correctly in CS4, but not in CS6 (don't know about CS5).
I want to make a vector shape from a path. Is there a way to bypass having to define a new custom shape? I just want to quickly add the vector shape to a new layer, but I don't need it defined as it'll just be used once.
View 5 Replies View RelatedShape making from multiple complex shape and path layers?
so i have few layers(all vector paths and shapes) .
now how to make a shape from all of that. every new shape is layer for itself. I need it for logo.
any way to delete more than a single shape at a time from a shape collection file, other like step by step with the option key? I have one collection with about 400 shapes and would like to save it to some "groups", like people, arrows, devices..
View 1 Replies View RelatedSince the release of Photoshop CC the "Live Shape Properties" has basically chosen when it does and does not want to show up.... sometimes I even create a new shape to replace the old one and it STILL does not show the live shape properties... how hard is it to make sure the options are available at all times? I opt for a discount since this is a half working application and the features you highlighted barely function...
View 1 Replies View RelatedIs it possible to fill a shape with a gradient fill so it goes up to all edges and gradually get darker/lighter inwards? For example, If I have a star shape, can I have a gradient fill in the shape of a 'star'?
View 1 Replies View RelatedI'm using CS4. I have multiple layers of text and I want each one to have a different drop shadow effect. When I try to chnge the settings of one layer's shadow, all the layers change. Is there a way to stop this?
View 2 Replies View RelatedI'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
I'm working with CorelDraw X3 and want to fill text into a round shape, while keeping it's exact outline. Hence, cutting of parts of words and letters is fine with me as long as the shape is well-defined. Unfortunately when filling paragraph text into a shape, the automatic line breaks lead to a quite irregular shape regardless of font size.
As workaround I arranged a mask in front of background and text but this requires a square paragraph text which is larger than the background. Since paragraph text obviously cannot be cropped with other objects I made the mask size bigger and filled it white. When exporting my document as image everything looks neat, but there must be a better way to do this in CorelDraw itself?
I tried converting the paragraph text into artistic text and cropping this, which works fine for a few words and a small object. But I'm talking around 1000 words here, and trying to crop this artistic text leads to very random cropping results. I guess such a large number of objects and knots is too much for CorelDraw to handle!?
I want to engrave the text 'TEST' all the way around this clonal object. When I use the emboss tool, selecting the option 'wrap to face,' it gives me an error message that the "face selected is not tangent to the profile plane."
I am using a work plane that is offset from the XY plane. I included a screen shot and the file that I am using (Inv. 2014)
I just read the thread the thread "...plus ask about erasers" but it doesn't answer my question about combining shapes to remove unwanted portions - or at least I didn't quite understand it. Here's my issue. I've created a nice "background" image with ripples and live effects, but it has gaps, and isn'tthe right shape. I need to erase parts of it and clip it to the right shape, but every time I try to do this using the slice tool, it puts the gaps back into the image! Attached is my image and the shape I want to clip it to.
I just tried converting the ripple shape to a bitmap copy and then slicing the shape - that doesn't get me the rippled effect I want - just the shape I already have. Then, I tried just creating the water ripples in my shape - but again that leaves gaps and when I try to "slice" them away it does all kinds of weird things to the shape..
I'm using CS3 on a Mac.
I outlined my text and subtracted it (and the tree image) from the black background. When I did this both appear thinner - particularly the tree.
If I then take the original version and the new subtracted version, and view them both overlayed one on top of the other in wire frame (outline) mode, there is no difference in the actual lines.
It seems to be a problem with the way illustrator previews the images. This wouldn't concern me, but when I export the file as a jpeg, the lines also appear thinner in the export.
I can create a manual solution by offsetting the path before subtracting, but this isn't ideal.
What does it mean when Illustrator v.15.1.0 ceases to contract a shape using offset paths and will only expand a shape? Seems like only yesterday I could render both ways. Wait a minute, it was only yesterday! Why would it suddenly stop funtioning?
View 3 Replies View RelatedI have two layers on the bottom I have text, and on the top I have a shape.
How do I make the shape transparent so the shape may be filled with the background color?
I have an image, I just need to changethe text in that image without changing anything else.
View 5 Replies View RelatedI just installed CD on my daughter's computer and her shape tool only allows for a free form selection by following the cursor in a free form way. My install allows for a rectangular click-and-drag type of selection. I see no options for this tool Is her install bad?
View 5 Replies View Related