Illustrator :: Changing A Shape Inside Perspective Grid
Jan 20, 2013
I've created a 2-point persective grid on top of a cube (see image below). I'm tyring to recreate the cube and have started by inserting some purple squares into the right side of the perspective grid. I've drawn an ellipse at the corner of the original cube that I'm trying to copy, to indicate where I need my squares to stretch to.
How I can stretch my purple squares in perspective so that they match the end of the orignal cube as indicated in the image below? I've tried skewing but this doesn't skew in perspective.
View 5 Replies
ADVERTISEMENT
May 20, 2012
I was expecting that existing artwork on a perspective grid would move/adapt when changing grid properties like vanishing point etc. but it looks like the artwork just stays unchanged.
I couldn't find anything on the net - is there a way to change the artwork accordingly with the perspective grid?
View 5 Replies
View Related
Apr 25, 2013
When using the perspective grid tool and type, I have a word on the right side of the grid in perspective, and I want to make a shadow of this word flat on the bottom grid. (Like how a tall building casts a shadow flat on the ground)
I tried using the shear tool to do it but it is a bit tricky getting it just right. There must be an easier way to do it within the perspective tool grid.
When I type the word and align it to the bottom grid, how do I rotate it whilst still being aligned in perspective on the bottom grid?If I try and rotate the word using the selection tool it rotates off axis so it is no longer laying flat on the bottom grid.
Words placed on the bottom grid always read from the left vanishing point - I want the word to read from the right vanishing point so it aligns with my word on the right grid wall.
View 3 Replies
View Related
Dec 3, 2010
I really enjoy this new draw inside feature in Illustrator. But, I find that it does not always work. It seems to be grayed out sometimes. For example, I have drawn a shape with my Wacom tablet using a blush. I then converted it to a shape instead of keeping it a stroke by expanding it. But it will not allow me to now draw inside of it, even though it is a shape.
View 8 Replies
View Related
Jul 22, 2013
I'm working on a sticker with a Big Ben style clock on it. I've created it using the 2-point perspective ability in Illustrator. Unfortunately, I've decided that I want it to feel "taller" than when I started, so I need to shift the perspective. However, when I use the Perspective Grid Tool and adjust the ground or horizon line, it only adjusts the grid, not the artwork. Is there a way to have the artwork adjust with the grid so that I can move the artwork around in 3D space to find the right perspective?
View 3 Replies
View Related
Jun 28, 2013
How do I use embedded links with the perspective grid?
View 8 Replies
View Related
Jun 25, 2011
I read somewhere that it is possible to tilt the whole perspective grid (like rotating), using the Horizon Level and Shift/Alt. This is not working for me. How to tilt the perspective grid.
View 8 Replies
View Related
Feb 6, 2014
How to use the perspective tool and i understand that i can draw a grid onto this but the grid always seems to be out of whack when i do and the line spacing isn't at all perfect. What i want to be able to do is draw a grid with equal spacing and have the ability to warp this so it looks all bent up going off into the distance.
I can see this is going to be something that i have to draw in manually but i'm kind of hoping that i can have the bulk of the job done for me.
However, if i do have to draw it manually, how would i go about spacing the lines equally along a wafty curved line???
View 4 Replies
View Related
Nov 23, 2012
I've an image of a picture and i want to add this picture in the perspective grid in illustrator. How can I add this picture?
Another question: If you write a square with the rectangle tool in illustrator and you select a face in the left up corner, is there a way to make the square how can i explain... You move the swuare on theat face with the mouse and when it reach the "border" it will start move on the other face, just like a wall, if you put a piece of pare in a corner, the paper will assume the shape of the corner. Is it possible to do this instead of create 2 square and merge them in the corner?
View 1 Replies
View Related
Sep 27, 2013
how can i move or create object above the horizon when using the perspective grid? now when i create object on the botoom palne and try to move it above the horizon it just reaches the horizon and stops there. haow i am able to place objects on the top?
example: when i am creating a room from inside, a can create the floor an the walls, but not the ceiling?
View 2 Replies
View Related
Feb 26, 2013
I'd like to have a document where I have type skewed on both sides of the perspective grid. I know how to put it on the left side of the grid: Create the type, get the Perspective Grid Selection Tool, select the type and bring it onto the grid and it skews to the angle of the grid. However, when I try to do it on the right hand side of the grid it doesn't allow me. It only lets me angle it on the left hand side of the grid.
How can I get it to write on the right hand side too?
View 1 Replies
View Related
Sep 12, 2010
I'm just now getting started with CS5, so Perspective Grid is new to me. possible way to either delete a grid already on the artboard or to reset it if one wants to start over.
View 4 Replies
View Related
Jan 11, 2013
Set up the perspective grid tool on a birdseye (oblique) aerial? I'm starting to understand how to create a basic perspective drawing on a blank canvas, but aligning the grid to an existing image is completely escaping me.
View 2 Replies
View Related
Apr 19, 2013
I have a word EDGE and I try to place it in the middle of the perspective grid, so the half left follow the left grid,
while the half right follow the right gird.
something like this:
Right now I use two graphics, and I was curious, whether I can use one image, place it in the center of the grid, and have it automatically fold over the left and right side. I'm working on very complex vector and I would rather not split it into half to create two independent images.
Is there a way to do it ?
Whenever I like to adjust the perspective using the drag points, the graphics won't adjust accordingly. I find myself refining the persective grid and than manually, from scratch readjusting all my artowork. Is there a way to do automatically ?
View 4 Replies
View Related
Jan 5, 2014
I've got a one point perspective set up perfectly for my wall as on the picture below, to place the 3D wording onto it. Except that the perspective grid ONLY lets you use the left side, for some reason the right side is unavailable. On the active panel, the right side is light blue and says "no active grid". Tried everything, including dragging the left grid over to the right side - but when you place things on it then they are reflected in the wrong direction (text backwards).
View 11 Replies
View Related
Feb 21, 2013
I'd like each side of the perspective grid to match the two different angles that are the sides of this building. I'm trying to get something done using it and have never used it before.
View 5 Replies
View Related
Apr 23, 2012
I have been following this tutorial: [URL] .... in which artwork is mapped to the perspective grid.
Towards the end of the video (7:00) a sign is mapped to the left grid then moved perpendicular along the right grid ... this is achieved by holding down the tilde key.
When I hold down the tilde key and move the object (which is selected with the perspective selection tool, with the correct grid selected ) it does not map it perpendicular as in the video.
I have deleted my illustrator preferences file (in case any settings were causing this feature not to work). Also if I create a new object and press the tilde key and drag I can create multiple instances, so the tilde key at least in this case is being recognized.
View 3 Replies
View Related
Jan 26, 2014
How do you turn off 'perspective' in rectangle grid tool?
View 1 Replies
View Related
Jun 26, 2012
Using Illustrator CS5 I am drawing a 5 drawer cart in the 2D Perspective grid. After drawing one drawer with connected sides, back and bottom I want to be able to copy and move this drawer 4 times into the correct positions in the cart. I do not want to redraw the drawer 4 times. I know I must use the Perspective Selection Tool to do this. However, I cannot get it to move the entire copied drawer into the next position. I have tried using PathFinder to unite the parts of the drawer and the Compound Path command but to no avail. How can I accomplish this task?
View 4 Replies
View Related
Dec 5, 2012
It would be very beneficial to view all of the internal lines of the sectioned rectangular prism that the perspective grid consists of. This is a standard workflow for drawing 3 dimensional objects. Without this, it is very difficult to draw accurately.
Essentially this but in perspective mode: [URL] .....
This doesn't appear possible to in CS5. Please specify if this is not the case and if it is possible in CS6.
View 4 Replies
View Related
Sep 3, 2012
Let say I have a pot of flower I drew in Illustrator and I want to place it on a Perspective grid so that I will have half of the drawing snap on Left Grid in the perspective and another half snap to Right Grid?
Is there any easy way to do this without first slicing the artwork in half and place them individually?
View 2 Replies
View Related
Sep 12, 2013
I have a tall rectangle I want to place on the horizontal plane of the perspective grid.
Clicking that plane in the widget, or slecting the rectangle and hitting 2, results in the rectangle oriented towards the right vanishing point (or 2:00). I need it to point the other way, toward the left vanishing point (to 10:00).
Is there some way to force an object to do that?
View 2 Replies
View Related
Mar 14, 2014
I was using the perspective grid tool and all of a sudden the selector for my vanishing point dissappeared.
How do I get this back? I have the perspective selection tool selected too BTW.
This is what I have:
I'm missing this selector:
View 4 Replies
View Related
Nov 25, 2013
Editing someone else's file
They have a Square with an oval in the middle used as a clipping mask
When I click on the object, I can only modify the outside square, not the inside oval
What kind of a shape is this, and can I edit the oval? I don't use Illustrator much.
View 4 Replies
View Related
Feb 21, 2013
I have created the outline of a snake using the pen tool. The shape is closed. I want to add scales that do not overlap and are snug against the outline wall. Im sure I am missing something incredibly simple. I tried to create anchor points along the outline and use the pen tool to connection the anchor points but doing so would delete the anchor points. Each scale will be different colors and shape and they need to all be snug together.
View 5 Replies
View Related
Sep 26, 2013
I'm trying to find a way to fit a text inside a shape and to align it exactly to the shape borders, I was trying to play with the justification panel under the paragraph link but couldn't make it work,
I was trying to fit my text inside a shape look like the number 7 so eventually when a viewer see it they can recognize the number 7 without a stroke - only by the text insize the shape, above is an example of what happe when I try the same with a circular shape - I would like the test to fit in nicely filling the entire circle.
View 5 Replies
View Related
Oct 24, 2010
I select a shape and choose file > place to place some text in it, though the text does not display, the stroke also disappears indicating that it seemed to do something.
View 8 Replies
View Related
Apr 24, 2013
Im looking for a way to export a pattern made in Illustrator to auto cad.
I would like to select objects inside a shape based on the shape.
As you can see here i would like to select all the objects inside the blue circle, and delete everything outside of it. I dont want to use a cliping mask as it does not really destory the objects outside the circle.
View 3 Replies
View Related
Feb 17, 2013
I would like to create a vector icon with a transparent shape inside it, like in this image below:
So everything should be transparent except of course the dark grey area...
Below is a link to my AI file if you want it:
AI File
View 4 Replies
View Related
Jun 18, 2012
so I came up with this script, and it worked fine until I tried it on a different file. I have moved the artboard around all over the "main" canvas (if that is what it is called) and on the one that it works on, seems to only work when artboard(top, left) is positive values. however on the new file it doesn't seem to matter where it is on the artboard, it wont work anywhere. it should find the textpath relative to the shapes position.
I thought it was the coordinateSystem, but that doesn't seem to fix it. How the canvas works (maybe the math.abs();
threw it up on gist because it was pretty big: [URL]
View 3 Replies
View Related
Mar 10, 2014
I am struggling to understand why Illustrator is changing the values inside the RGB and CMYK boxes. I am also not sure of the exact relationship between these vaues. Essentially, it appears that if you set the Document Color Mode to RGB, it leaves the RGB values that you type in alone. If you set the Document Color Mode to CMYK, it leaves the CMYK values alone.
But as soon as you change the Color Mode, it automatically modifies the values. So if you were in RGB mode and you set some RGB values, it changes those RGB values when you switch to CMYK mode. And vice versa.
I had thought that the CMYK palette was a subset of the RGB palette. It would make sense to me if it did this when I switched from RGB to CMYK mode, but it doesn't make sense to me why it does this when I switch from CMYK to RGB mode.
The other thing I am confused about is the relationship of the values in the RGB boxes to the values in the CMYK boxes. I would have thought that the relationship between them would be static. Actually, it is not. When I am in CMYK mode and I enter a CMYK value of 90 16 0 0, the RGB values become 0 158 222. But when I switch over to RGB mode, the RGB values of 0 158 222 result in CMYK values of 75 23 0 0.
View 2 Replies
View Related
