when entering text, mega spaces seem to be a default between lines of text. Changing the leading does nothing to correct this. Thinking that my software became corrupted, I deactivated and reinstalled. But the problem persists. If I type the text into Word, cut and paste into PSE10, the problem continues.
View 1 RepliesI am creating subway art and am creating various templates. I would like it so that when I have a text box with a 5 letter word, and I want to enter a longer word, they all fit and just kind of smush together rather than me having to fix the text boxes constantly.
View 4 Replies View RelatedWhenI try to insert text in a photo, in PS Elements 11, I get a small book icon, but cannot go further.
View 7 Replies View RelatedI'm using Elements 5.0. Is there any way to limit the text during entry to a set area. Can't seem to find anything like a bounding box that prevents it 'leaking' out of the side/s of the image. Anything similar to setting margins in word for example?
View 7 Replies View RelatedMy text is entering as all caps, no matter what I try. How can I change it back to standard formatting? And, no, I don't have caps lock on.
View 6 Replies View RelatedI am simply trying to create a banner for my Etsy shop (essentially a picture with text over it) and I'm having a devil of a time getting this simple task accomplished. Whenever I have the text box over the image I want to use I type in the text and it comes up as 'little marching ants' at the bottom of the textbox. I then go into preview and none of the text comes up over the image.
View 1 Replies View RelatedWhen I enter text into an image, the letters are surrounded by the moving selection dashes, the font colour is not there, the image turns a strange red colour and I cannot get rid of the selection dashes.
View 2 Replies View RelatedI am doing some tooling drawings for my company. I am using AutoCad LT 2008. When I email my drawings, I have to convert them to Autocad 2004 so the tooling company can open the drawings. They then convert it to Mega Cad 4.8 to import it into their system. My problem is that any text in my drawings does not show up for them in either programs. I have tried several different fonts, but nothing works. This is causing time consuming problems for both of us.
View 7 Replies View RelatedI've created an action to watermark my photos with a copyright message at the bottom.
At times, the alphabets appear to be all in one character space.
When I enter text into document using photoshop text the end result always has jagged edges.
View 2 Replies View RelatedIs there a way to change the default color of the Dimension lines and text? I want it to default to black not dull green! I can change it afterwards, but can't seem to find a way to change the default color.
View 1 Replies View Relatedi would like to create 8 textbox's in one page each one with its own font, font size, color.
the thing is that i want the text to be the same in all of them
when i change one all change
I've been adding text to layers for a few months with no problem. I use the text tool all I get is a 'dot' with a line that extends as I type. It does create a layer and the layer is named by whatever I typed but there isn't anything there.I've gotten the outline to show, but it's empty. the font size might be too small to see. I have a 25 inch background and set the font to 72 but still nothing.
View 27 Replies View RelatedI'm working on a quick reference guide that will be screen printed onto a metal panel and would like to use either an em or en space at a few points within the text. I can't for the life of me figure out how to accomplish this in AI CS4. at least an alternative if this isn't an option?
View 6 Replies View RelatedAt some point, several months ago, my sister and I were playing with transform (by phone, we are in different states) -- she had taken a Photoshop class and wanted to try to duplicate something.
I tried using my type tool yesterday, and couldn't see anything when I typed. (White background, black text, Arial, 14 pt, 100%). I've tried clearing type presets. I finally tried blowing it up to 500% and saw a small, gray font-like image where I was typing.
I held down Ctrl and played with the transform box: if I expanded the box, my text is there. I've tried clicking on everything at the top when in transform. How to get my type tool entering text in the regular way.
My question is simple:
When I have text inside a text box and it wraps at the end of the box, why can't I put spaces on the beginning of second line (the wrapped line)?
Every time I create a Photo Email in PSE 11 the email appears in my email client with this text added to it: "Here are the files that I want to share with you". I do not what this text and I have to select it and delete it for every email I create. Is there any way to change and/or eliminate this text permanently within the PSE files?
I found the text in the following file, but eliminating it from that file did not stop it from displaying. How can I get rid of this unwanted message?
C:Program Files (x86)AdobeElements 11 OrganizerAssetslocaleen_USemailsignaturesstandard_subject.txt
I've just tried entering some text on a blank canvas in GIMP 2.8.4 and the text tool doesn't seem to be working right. I click on the text tool, click on the canvas and try to type, but it doesn't actually type; it just operates all the shortcuts assigned to the keys that I've pressed.
Running OS X Mavericks on a late 2012 MacBook Pro.
How do I add text on an opaque background, similar to the text box created in MS Paint (example attached)
View 4 Replies View RelatedI'm currently running AI CS6. In previous releases, when I wanted to start entering text at a certain point (with the regular type tool) I would position the I-beam at the vertical line where I wanted to start, and with the little horizonal line of the I-beam on the horizontal line where I wanted to start, and click. But in CS6, that click seems to position the text on the left-most dotted line surrounding the I-beam, rather on the I-beam itself. Is there some parameter I can set so that the I-beam determines the starting point of text? Or do I just need to adjust my thinking to a different way?
View 4 Replies View RelatedI have created a polar grid in illustrator with many sections. I want to be able to enter text in every section of the grid and not just along the path lines. How do i create text frames so each grid section within the polar grid is separate and therefore allows me to click on it and enter text. I would also like to change the colour of all the polar grid sections individually. I think it might have something to do with threaded text but not sure.
View 17 Replies View RelatedareaText.contents = "This is an Area Text in a rectangle. See how it flows to the next line.";
/*
i want to break the sentance from 'Text' ie i want to add new line in between and also some more spaces.
*/
For example: I want to write the above text like this way
this is an Area. Text in a rectangle. See how it flows to the next line.
I am creating a template that will have four text boxes that I will populate from a merge document. I need to have the envelope feature applied to each of the text boxes so any long text will be compressed to fit in the designated text box.
I understand the basic function, input text, select text, select Envelope feature but that sets the envelope box to the size of the inputted text, where I need a fixed text input box size.
How do I prevent "Edit Attribute" pop up prompt for entering text for an attribute in a block? I just want the same attribute text each time I insert the block, I don't want the "Edit Attribute" popup window to re-enter the same text every single time.
I do want the attribute text so mirror won't reverse it (I just want permanent attribute text).
First I delete the old regular text.Second I give the block an Attribute Definition Tag and enter the text I want in the Tag blank. Third I center where I want the text. Forth I save the block.
When I finally insert the block I get the "Edit Attribute" pop up to renter what I want it to say. Like I said earlier, I don't want this pop up, I just want to enter the text once and that's it. Also if I enter nothing in the "Edit Attribute" pop up, then no text will show on the block.
what I have to do, in AutoCAD, to make two center lines to intersect on lines and not on free spaces.
View 9 Replies View Relatedthis function is not functioning anymore. I may have done something to cause this but I don't recall.
Entering sizes in the text boxes does not change the object size anymore.
The only option right now is use the transform size docker...would rather not have to do that.
Also, would not like to hit F8...
Draw X5 sp2 (15.2.0.661)
I hate pressing F8 at startup!
3rd party tool which didn't match our scaling needs the file is a fas so I have tried to reverse engineer the whole function using trial and error. The following code works perfect except we need multiple (x amount) lines of text I have at current the M txt function which mimics and is effective for today however we need all lines to be individual.
I’m playing round with a loop but how to achieve my need..He had a 3rd party tool which didn't match our scaling needs the file is a fas so I have tried to reverse engineer the whole function using trial and error.
The following code works perfect except we need multiple (x amount) lines of text I have at current the M txt function which mimics and is effective for today however we need all lines to be individual.
;Starting lisp program...(defun C:REDtext ();Creating Layers (if non existant)...(command "layer" "m" "TEKST-1.5mm" "lt" "continuous" "" "c" "1" "" "");Memorising previous layer...(setq MYOLDLAYER (getvar "clayer"));Setting requierd layer...(COMMAND "LAYER" "SET" "TEKST-1.5mm" "");Setting variable "MYHEIGHT" to "DIMSCALE" x 2...(setq myheight (* 2 (getvar "DIMSCALE" )));Requesting and storing usser defind point...(setq MYPOINT (getpoint "Start punt :")); Requesting and storing user defind text...(setq MYTEXT (getstring T "Nieuw tekst :"));Placing text...(command "text" MYPOINT MYHEIGHT "0" MYTEXT); Restoring previous layer...(setvar "clayer" MYOLDLAYER);Closing lisp program...)
I am often using text within AutoCAD 2012. Here is what I do, look at the attachments:
1. Create the text using the mtext tool
2. Explode the text using the txtexp tool
But, when I explode the text, lines appear inside the text like in the image. I then have to explode the whole thing and delete these lines manually. Any tool or add-on to get around this annoyance every time I insert text.
I am creating 3D text in illustrator but when I go to save it as an EPS it saves with lines all over the text, I'm wondering why its doing this !!
View 1 Replies View RelatedRunning PSE 9 under Mac Snow Leopard.
I have a family photo including many text layers. I'm trying to edit the text in a selected large multi-line text layer. I'm following the steps from the appropriate PSE article, but I always end up creating a new layer and the red/green no-go/go option. I thought I should just be able to double-click the text layer and start editing.
When attempting to add text to a photo, the typed text is not visible on the layer in the "Layers Box" until exiting the Text Tool. Text nexer is visible on the photo Background image. If the edited image is saved, the added typed text is not saved; only the original Background image. How do I reset the Text Tool so it will be functional?
View 3 Replies View Related