I am often using text within AutoCAD 2012. Here is what I do, look at the attachments:
1. Create the text using the mtext tool
2. Explode the text using the txtexp tool
But, when I explode the text, lines appear inside the text like in the image. I then have to explode the whole thing and delete these lines manually. Any tool or add-on to get around this annoyance every time I insert text.
I have this strange situation.. i use the Arial font inside my cad drawings and when i print my paperspace layout, the text inside the viewport is a little bit more "bold" then the text i put directly on paper space.
Maybe it's a trick to know what text is placed where, but i want all this to be uniform, same thickness. Is there a system variable to correct that issue?
See the image below: It's a 400 DPI scan from an impression i did.
Up to COUPE C1 is the text inside the viewport, under COUPE C1is the paperspace text. Both are the same height... but difference tickness.
Text is allowed only on the outside of a rectangle shape. The text cursor disappears when I try to enter it into the rectangle and when I place it on the edge of the rectangle, it rurns into a slanted "A" and allows texting on the border of the rectangle. Corel Paint Shop Photo Pro X3 (build date Sept 7, 2010). This software came with my new HP Pavilion dv7.
View 1 Replies View RelatedI have designed a C# application to To Print I Cards Of School. Here I am sending data from my application to a CDR FILE (Already Created ) Which Contains ADDRESS Text Field..Now I Need to Print Address(which contains 60 characters or more) on this Text field .
I Have Used The following c# Code.. To Replace Address text field that contains text 'Address '.....
s.Text.Replace('Address',"Text To be replaced .......")...here s is Active shape...
This Works Fine But How can i WRAP TEXT....of Address field.
I'm trying to create a type mask in photoshop. What I want to do is to have a picture layer with a type layer on top. I want to only be able to see the parts of the picture that the type covers (i.e., if the type is my name you can see a dollyholland shaped picture - if you move the type around it will reveal different parts of the picture
View 3 Replies View RelatedI have inside every text,Mtext contents different text style like Arial_1 , Arial_2.
How i can give all the contents inside one style ? the normal procedure i will enter inside text to enter editing mode and changing text format style one by one. I want it once.
I want to save my routing of entering every text to change its content text style.
(Notice:select all from outside without editing mode will not do the job)
I'm trying to export some AutoCAD files to SketchUp as DWGs... everything comes through fine, but the text (and certain other line-types) won't transfer over. I know that with AutoCAD 2008 using Express Tools, you could do this easily by exploding the text. How can I explode text using AutoCAD 2013, so that it will export as vectors in the DWG file?
View 6 Replies View RelatedI create schematics of lighting control systems for my job, the controllers on my schematic have multiple outputs which I need to modify so they're relevant to the job.
At present I have all my blocks in a tool palette and just click and drop to add them to my schematic.
How can I tailor the text of a block without exploding it? Is this even possible?
I have encounter some text exploding problem. As shown in attachment, I would like to know if there any possible way I can explode the text into polyline or single line and maintain it within the position and style?
View 8 Replies View RelatedI have a problem in autocad7, once i explode text to make it a vector the vectors go from being curves or radius to straight lines, how to make them into curves as we have to run a cutter path the only thing is they cant be splines.
View 1 Replies View RelatedI have some images, this image contain a real picture of house from outside with a wall in front. I want to wrtite a word in that wall in a way that people will see this picture will think that the word is wrotten to wall of house and not guess that it is made by a software.
Also, suppose that there is already a word written in the wall, is it possible to replace that word with some other word, in a way that people will not guess it is made by a software.
Pulling apart a drawing that someone else did, each block contains a set of text that I need, along with the polylines for editing, however, when I explode these blocks to edit the polyllines - all of the text inside the blocks changes to generic terms like "AUX".
I assume that these blocks go to a lookup table of some sort to find their names, but it's not something I'm familiar with - is there a way to get the text to "hardcode" or something? Just force it to stay as it is before I explode the block?
I'm trying to create a logo whose letters have an image in them - which I've got figured out (turning letters to outlines, creating clipping mask with image). The trouble is, once the image is inside the letters, I can't figure out how to then give the letters a thin stroke outline. Is this possible? The image I've placed is high contrast black and white, so when I create the clipping mask, large chunks of the letters disappear.
View 11 Replies View RelatedI am trying to do something simple that I've done a million times in Photoshop CS5 -- create a text box with some text inside. But something is going wrong and I can't quite figure it out...
Notice how the text box is now much larger than the text displayed. I would like to make this text box as wide as the guide aligned with the "Donate" box.
... But when I pull the right middle handlebar in slightly, look what happens to the text:
3rd party tool which didn't match our scaling needs the file is a fas so I have tried to reverse engineer the whole function using trial and error. The following code works perfect except we need multiple (x amount) lines of text I have at current the M txt function which mimics and is effective for today however we need all lines to be individual.
I’m playing round with a loop but how to achieve my need..He had a 3rd party tool which didn't match our scaling needs the file is a fas so I have tried to reverse engineer the whole function using trial and error.
The following code works perfect except we need multiple (x amount) lines of text I have at current the M txt function which mimics and is effective for today however we need all lines to be individual.
;Starting lisp program...(defun C:REDtext ();Creating Layers (if non existant)...(command "layer" "m" "TEKST-1.5mm" "lt" "continuous" "" "c" "1" "" "");Memorising previous layer...(setq MYOLDLAYER (getvar "clayer"));Setting requierd layer...(COMMAND "LAYER" "SET" "TEKST-1.5mm" "");Setting variable "MYHEIGHT" to "DIMSCALE" x 2...(setq myheight (* 2 (getvar "DIMSCALE" )));Requesting and storing usser defind point...(setq MYPOINT (getpoint "Start punt :")); Requesting and storing user defind text...(setq MYTEXT (getstring T "Nieuw tekst :"));Placing text...(command "text" MYPOINT MYHEIGHT "0" MYTEXT); Restoring previous layer...(setvar "clayer" MYOLDLAYER);Closing lisp program...)
For some reason the line type scale is way out to lunch on one of the lines in a block i use, so i was wondering if you can change that LTS without exploding the block, or if i can change the LTS for the layer that specific line is on without exploding the block
View 4 Replies View Relatedwhen entering text, mega spaces seem to be a default between lines of text. Changing the leading does nothing to correct this. Thinking that my software became corrupted, I deactivated and reinstalled. But the problem persists. If I type the text into Word, cut and paste into PSE10, the problem continues.
View 1 Replies View RelatedI have several featurelines that I wish to explode to be 3D Polylines (bad, I know, but it's a test for a way to get data across from our design group to our survey group).
Last week, in this drawing, I exploded a large selection of featurelines and they all became 3D polylines, preserving their elevation data. This week, I drew an additional set of featurelines in the same drawing. When I explode them once, they lose all elevation data, becoming lpolylines at z=0. Additionally, the Prospector shows me several errors: "breaklines not added to surface" or something similar. Which is an odd result for the explode command.
Why did this work once but not a second time?
Win 7E 64-bit, Intel i7, 12 GB C3D 2012
I am trying to make a block with text inside in it. I need the text to rotate at 0 no matter what degree I insert the block into my drawing. For example the type of blocks I use are for fire alarm in which need to go onto different sides of the walls so I need a base point in which I can insert the block at but the text to always rotate back at 0.
View 9 Replies View RelatedI am creating 3D text in illustrator but when I go to save it as an EPS it saves with lines all over the text, I'm wondering why its doing this !!
View 1 Replies View RelatedIs there a way to put constraints on text and a rectangle? I'm trying to make a block so if i change the text the rectangle around it grows automatically. I know it's simple enough to just manually extend it but one of my engineers asked me to try and create this for him and i can figure it out.
View 9 Replies View RelatedI am trying to align all of the text inside of a block and have it actually align the text instead of having it keep it original position (like when you use "Justifytext" command). For example: We use blocks for fire alarm devices that we insert into drawings. When the devices are inserted they look like this (Middle left):
15CD
TBD
TBD
1/4W
I can double click each line of these texts, have the eattedit window pop up, go to "text options" tab, click the drop down menu for "Justification:" and then choose my justification(middle right); then the text will actually move to align itself with my justification, causing my text to end up like this:
15CD
..TBD (Roughly like this, only perfectly straight vertically on the right hand side)
..TBD (ignore the dots, i had to insert them for the spacing to be correct for
1/4W this example)
When I type "Justifytext", select my block, choose my justification (Middle right), just the snap point moves to that justification without the text actually moving at all, causing my text to end up like this:
15CD
TBD
TBD
1/4W
With iLogic, define some pre notes and when the user choose one option some notes are chosen too.The idea now is: Create a text direct inside on Sketched Symbol OR edit some textfields inside the Symbol.
The symbol could be one existent, so its not necessary to create it.
I got a code to create the text, and that works perfectly! Just what im trying now is create this text into the Symbol... I've tried many ways with reference from: URLs....The code to create the tet im usnig is this one:
' a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument oDrawDoc = ThisApplication.ActiveDocument ' a reference to the active sheet. Dim oActiveSheet As Sheet oActiveSheet = oDrawDoc.ActiveSheet ' a reference to the GeneralNotes object Dim oGeneralNotes As GeneralNotes oGeneralNotes = oActiveSheet.DrawingNotes.GeneralNotes Dim oTG As TransientGeometry oTG = ThisApplication.TransientGeometry ' Create text with simple string as input. Since this doesn't use ' any text.
[code]....
but, if i could just edit one existent text filed into the symbol would be great too and one "extra doubt", in all the codes that i get here, i have to erase the "public sub" and the "set" from all code, am I doing something wrong ? I'm running directly from the iLogic window.
How can I explode a rectangle to 4 individual lines? i need illustrator equivalent to autocad explode function. I searched a lot on net, couldn't find it. I tried expand command too.
View 4 Replies View RelatedI need a lisp code to burst all "blocks with text/attributes inside" in selected area. That means user should select an area (window selection) and lisp program should be find all blocks with TEXT or ATTRIB inside in selected area and then applys "BURST express tools" command to all these blocks in the selected area by user.
View 9 Replies View RelatedLooking for routine for converting text to attributes inside the block?
In my drawing I hv some attribute blocks having some Text in it. I need to change the Texts inside the blocks as Attribute Texts. I am attaching sample Blocks drawing..
Im trying to put text into or inside a circle so it fills up the circle,i will just be using one word not loads of words.
View 2 Replies View Relatedwant to put text inside an oval following or outlining the oval shape [URL]....
View 1 Replies View RelatedIs there a way to get text to take the form of a shape... fitting inside the shape. Like inside a diamond so both ends are narrow. Without upsetting the perspective. Or like the harley davidson logo?
View 1 Replies View RelatedI'm trying to do some comic-booky style text with some half tone "dots" inside the text. I've got my text, I've got my dots, but I'm having hard time getting them in the text. I've tried using "Paint Inside" and pasting them in, but then I lose the stroke and can't get it to stroke the text the way I want. I've tried a clipping mask, but that doesn't seem to work quite right either.
View 2 Replies View RelatedI am pretty new to Photoshop and I have come across a few things that I would love to do but I cant figure out how to do them. Also, I have elements so I'm not even sure if I can do them. Anyway one of the things I am trying to learn is how to put lines over an image. For example the very first picture on this site: ...
View 1 Replies View Related
