I am trying to make a block with text inside in it. I need the text to rotate at 0 no matter what degree I insert the block into my drawing. For example the type of blocks I use are for fire alarm in which need to go onto different sides of the walls so I need a base point in which I can insert the block at but the text to always rotate back at 0.
View 9 RepliesIs it possible to make a pull down inside of a attributed block?
For example: if I a have engineering code section of a title block and I want to be able to choose from a list of codes:
ASME A17.1-2004
ASME A17.1-2007
ASME A17.1-2010
ASME A17.1-2012
Can I set up the block to let me do that?
I am trying to align all of the text inside of a block and have it actually align the text instead of having it keep it original position (like when you use "Justifytext" command). For example: We use blocks for fire alarm devices that we insert into drawings. When the devices are inserted they look like this (Middle left):
15CD
TBD
TBD
1/4W
I can double click each line of these texts, have the eattedit window pop up, go to "text options" tab, click the drop down menu for "Justification:" and then choose my justification(middle right); then the text will actually move to align itself with my justification, causing my text to end up like this:
15CD
..TBD (Roughly like this, only perfectly straight vertically on the right hand side)
..TBD (ignore the dots, i had to insert them for the spacing to be correct for
1/4W this example)
When I type "Justifytext", select my block, choose my justification (Middle right), just the snap point moves to that justification without the text actually moving at all, causing my text to end up like this:
15CD
TBD
TBD
1/4W
Looking for routine for converting text to attributes inside the block?
In my drawing I hv some attribute blocks having some Text in it. I need to change the Texts inside the blocks as Attribute Texts. I am attaching sample Blocks drawing..
I have this strange situation.. i use the Arial font inside my cad drawings and when i print my paperspace layout, the text inside the viewport is a little bit more "bold" then the text i put directly on paper space.
Maybe it's a trick to know what text is placed where, but i want all this to be uniform, same thickness. Is there a system variable to correct that issue?
See the image below: It's a 400 DPI scan from an impression i did.
Up to COUPE C1 is the text inside the viewport, under COUPE C1is the paperspace text. Both are the same height... but difference tickness.
I have a block containing several parts blocks. When I explode the main block all of the parts are exploded back to lines. I have used both "explode" and "xplode" and have the same results. How can I explode so I have my components as blocks?
View 6 Replies View RelatedI am trying to make a circular sign with text inside it that follows the contour of the circle. Half of the text will be on the top and half on the bottom.
View 6 Replies View RelatedHow to make a block with attribute text (like showing on sectioning?) a circle with arrow then line and there is editable text on the top of line or editable text inside the circle..
View 9 Replies View RelatedI want to make a dynamic block of just text. I want to be able to insert a block with a drop down pick list of preset texts and select the text I want it to display.
The attached file containing the various options of text I want to be able to pick from the list. I want to maintain the insertion point common to each text variation shown with a crosshair and the justification of the text as right and the height as 10. I would like to know how to add/remove variations to the block too.
LINK TO FILE IF ATTACHMENT DOESN'T WORK
[URL]......
I am not familiar at all with the controls in the block editor.
how to make make block attributes text visible next to my blocks?
View 4 Replies View RelatedI have attached the block for reference. Now that I have found the error of my way with the annotative cutline. I have a slab-on-grade block that needs to have annotative hatches; I also need the cutline to be annotative and dynamic so that as the drawing scale changes the scale of the cutline will be match and I can adjust the length of the extension lines. I have made the cutline a nested annotative and dynamic block within the slab-on-grade block. When I insert the block into my drawing the cutline is annotative and the dynamic grips show up but they do not work.
View 0 Replies View RelatedThere are many examples of creating rectangular patterns, but not many, if any, of interrogating existing patterns.I have attached the files and a screenshot of a rectangular part inside an assembly. The part contains a rectangular pattern of holes and workplanes.how do I get hold of each proxy of the workplane in the pattern?In other words I don't know what to put in the for loop at the end of this code fragment:
If _invApp.Documents.Count = 0 Then MsgBox("Need to open an the assembly document") ReturnEnd If If _invApp.ActiveDocument.DocumentType <> DocumentTypeEnum.kAssemblyDocumentObject Then MsgBox("Need to have an Assembly document active") ReturnEnd If Dim asmDoc As Assembly Document asmDoc = _invApp.ActiveDocument Dim asmDef As AssemblyComponentDefinition asmDef = asmDoc.ComponentDefinition im occurrences As ComponentOccurrencesoccurrences.
[code]....
We are using both AutoCAD 2013 and AutoCAD LT 2013, and are having some difficulties doing something that seems reasonable...
Basically, we made a block that has the following attributes:
LENGTH
ORDER
CUT-OFF
MATERIAL
CUT-LENGTH
CUT-WEIGHT
CUT-PER-FOOT
When we define this block, we set the value for "CUT-WEIGHT' as (CUT-LENGTH - WEIGHT-PER-FOOT) and "CUT-LENGTH" as (LENGTH - CUT-OFF)
Those formulas work when we initially create the block. The goal is to be able to change the "LENGTH" and "CUT-OFF" attributes, and have the block automatically calculate the CUT-WEIGHT and CUT-LENGTH based on those values.
The issue is that once the block is created, the formulas no longer work. We have tried Update Fields, we have tried REGEN, REGENALL and more, but nothing seems to work. The only thing we have been able to do is define the block, then basically create the block a second time, with those respective attributes being linked to the initial block, which is both not ideal, and created other problems.
I am attaching a copy of one such block, how to make this block work properly.
The final use of this block is to insert it into Shop Drawings for our Companies Products and then link the block to a table that shows the values of the blocks as a Bill of Materials.
I am unable to currently upload a copy of any Shop Drawings, but if need be, I could ask for a "Dummy" Shop Drawing that I could upload.
TAG - TUBE STEEL 4 x 2 x .25.dwg
I'm developing a tool similar to Insert command.
All I need is to get the thumbnail (image preview) from blocks in my drawing with vb.net application.
I'm Using VS2010, and API.COM to develop this.
I found how to do this with an external dwg file, but in this case i want to show the thumbnail from blocks in a drawing opened.
How do I delete the AutoCad block symbols that are stored inside my drawing?
Not blocks that have been created that you can see on your drawing it’s the blocks that the point styles use and are stored in the drawing.
I've made this block . when i rotate the vertical line I need to add lines every 15° as you see in the image, i've seen that polar array is not possible in the dynamic blocks.
View 8 Replies View RelatedI have inside every text,Mtext contents different text style like Arial_1 , Arial_2.
How i can give all the contents inside one style ? the normal procedure i will enter inside text to enter editing mode and changing text format style one by one. I want it once.
I want to save my routing of entering every text to change its content text style.
(Notice:select all from outside without editing mode will not do the job)
Is there a way (or a “trick”) to have one attribute at two different locations inside of one block (I want to avoid filling in the same text twice when this block is inserted or edited)?
View 9 Replies View RelatedI have a simple block with 2 attribute and 1 line inside it.
something like this:
Attribute1
──────
Attribute2
I want to modify length of line due to width of thoes attributs. length of line is equal to maximum(width attribute1 and width attribute2).
dxf code for start point of a line is 10 and end point for a line entity is 11.The question is: how can I modify the length of line automatically via maximum width of these attributes?
for getting width of a text:
(defun GetWidth ( en ) ((lambda ( lst ) (- (caadr lst) (caar lst))) (textbox en)))
sample:
A1
──────
Attribute2
Attribute1
──────
A2
I have the following code to redefine a block after a command has ended:
(vl-load-com);*********************************************************(defun Redefine() (command "_.INSERT" "reactortest=reactortest" nil)(princ "Block redefined."));****************************************(vlr-command-reactor nil '((:vlr-commandEnded . endCommand)));******************************************************(defun endCommand (calling-reactor endcommandInfo / thecommandend) ; Get the name of the command.(setq thecommandend (nth 0 endcommandInfo)); Check name of the command.(cond ((= thecommandend "PLINE") (Redefine)));cond(princ));defun(princ)
It doesn't work because INSERT is an interactive function and can't be called while a reactor is active. Is there another way to redefine a block that can be used in a reactor? The block is in one of the default search path's.
when i export (or explode) my plan every window, doors etc... split in more "under-blocks", and that's ok. but i have a problem with the windows: after the explode command, one of the blocks inside (the one that shows the opening side) "jump" in the 0,0,0 coordinates point, but all the others remain in the right position.
PS: i think the problem is not in the window-block, because i tried it in another old file, and it works. and the autocad option are also always the same.
I am often using text within AutoCAD 2012. Here is what I do, look at the attachments:
1. Create the text using the mtext tool
2. Explode the text using the txtexp tool
But, when I explode the text, lines appear inside the text like in the image. I then have to explode the whole thing and delete these lines manually. Any tool or add-on to get around this annoyance every time I insert text.
Text is allowed only on the outside of a rectangle shape. The text cursor disappears when I try to enter it into the rectangle and when I place it on the edge of the rectangle, it rurns into a slanted "A" and allows texting on the border of the rectangle. Corel Paint Shop Photo Pro X3 (build date Sept 7, 2010). This software came with my new HP Pavilion dv7.
View 1 Replies View RelatedI need a lisp routine which will delete all the dimensions inside selected block or blocks, including nested blocks inside.
View 9 Replies View RelatedI'm working with Autocad 2011. My objective is to create a dynamic block made up of a circle with a letter or number inside. Here's the tricky part. As I add additional letters or numbers the circle increases in diameter automatically to fully encircle whatever it is I type. The more letters or numbers the larger the circle and the fewer the letters or numbers the smaller the circle?
Or is there a lisp routine for this type of request?
explode xclip block while keeping the stuff inside the clip boundary as it is
View 9 Replies View RelatedThe standard in the industry I work in is the radius dimension goes on the inside of the arc. However, AutoCAD defaults the dimension to the outside of the arc. Is there a way to make it default to the inside? If not then this is the issue when I use the mirror command.
Attachment 44015
That arc appears and I cannot get rid of it.
I have designed a C# application to To Print I Cards Of School. Here I am sending data from my application to a CDR FILE (Already Created ) Which Contains ADDRESS Text Field..Now I Need to Print Address(which contains 60 characters or more) on this Text field .
I Have Used The following c# Code.. To Replace Address text field that contains text 'Address '.....
s.Text.Replace('Address',"Text To be replaced .......")...here s is Active shape...
This Works Fine But How can i WRAP TEXT....of Address field.
How would I go about this. if a two blocks or polygons are overlapping area?
A good method or the algebraic formula for a function to tell me if a point is inside a polygon or block's area?
Are there any neat tricks to scaling a DWG inside a block with parameters? I would assign a scale factor parameter to Instance Scale but as I can't I'm looking for a workaround.
I have a some 2D elevation trees that I want in my 3D tree block and alI just want to control the height. The problem is that if I explode the DWG in a family everything just disappears .
Is there a way that I can create a block with text ('A') and when I insert the block and populate the block another block block will update also? I am wanting to create a block for x-sec flags, and detail callouts that update their detail titles.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)