Photoshop :: CS5 - Create Text Box With Some Text Inside?
Dec 31, 2012
I am trying to do something simple that I've done a million times in Photoshop CS5 -- create a text box with some text inside. But something is going wrong and I can't quite figure it out...
Notice how the text box is now much larger than the text displayed. I would like to make this text box as wide as the guide aligned with the "Donate" box.
... But when I pull the right middle handlebar in slightly, look what happens to the text:
View 4 Replies
ADVERTISEMENT
Feb 8, 2013
I have this strange situation.. i use the Arial font inside my cad drawings and when i print my paperspace layout, the text inside the viewport is a little bit more "bold" then the text i put directly on paper space.
Maybe it's a trick to know what text is placed where, but i want all this to be uniform, same thickness. Is there a system variable to correct that issue?
See the image below: It's a 400 DPI scan from an impression i did.
Up to COUPE C1 is the text inside the viewport, under COUPE C1is the paperspace text. Both are the same height... but difference tickness.
View 9 Replies
View Related
Feb 7, 2013
Is there a new way to fill a shape or path with text in CS6.
When I create the path I can put my text tool "over" the path & my cursor switches to a curved line through the cursor, but when I place the cursor "inside" the path it just goes back to regular cursor & if I click inside it just starts a new (regular) text layer.
In older versions as soon as I placed my text cursor inside the path it would switch to the text cursor inside parenthesis. And thus type inside the path. That doesn't happen anymore.
View 7 Replies
View Related
Jun 4, 2011
Text is allowed only on the outside of a rectangle shape. The text cursor disappears when I try to enter it into the rectangle and when I place it on the edge of the rectangle, it rurns into a slanted "A" and allows texting on the border of the rectangle. Corel Paint Shop Photo Pro X3 (build date Sept 7, 2010). This software came with my new HP Pavilion dv7.
View 1 Replies
View Related
Feb 1, 2013
I have designed a C# application to To Print I Cards Of School. Here I am sending data from my application to a CDR FILE (Already Created ) Which Contains ADDRESS Text Field..Now I Need to Print Address(which contains 60 characters or more) on this Text field .
I Have Used The following c# Code.. To Replace Address text field that contains text 'Address '.....
s.Text.Replace('Address',"Text To be replaced .......")...here s is Active shape...
This Works Fine But How can i WRAP TEXT....of Address field.
View 2 Replies
View Related
Nov 1, 2012
With iLogic, define some pre notes and when the user choose one option some notes are chosen too.The idea now is: Create a text direct inside on Sketched Symbol OR edit some textfields inside the Symbol.
The symbol could be one existent, so its not necessary to create it.
I got a code to create the text, and that works perfectly! Just what im trying now is create this text into the Symbol... I've tried many ways with reference from: URLs....The code to create the tet im usnig is this one:
' a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument oDrawDoc = ThisApplication.ActiveDocument ' a reference to the active sheet. Dim oActiveSheet As Sheet oActiveSheet = oDrawDoc.ActiveSheet ' a reference to the GeneralNotes object Dim oGeneralNotes As GeneralNotes oGeneralNotes = oActiveSheet.DrawingNotes.GeneralNotes Dim oTG As TransientGeometry oTG = ThisApplication.TransientGeometry ' Create text with simple string as input. Since this doesn't use ' any text.
[code]....
but, if i could just edit one existent text filed into the symbol would be great too and one "extra doubt", in all the codes that i get here, i have to erase the "public sub" and the "set" from all code, am I doing something wrong ? I'm running directly from the iLogic window.
View 3 Replies
View Related
Aug 4, 2013
I have inside every text,Mtext contents different text style like Arial_1 , Arial_2.
How i can give all the contents inside one style ? the normal procedure i will enter inside text to enter editing mode and changing text format style one by one. I want it once.
I want to save my routing of entering every text to change its content text style.
(Notice:select all from outside without editing mode will not do the job)
View 2 Replies
View Related
Oct 23, 2011
I am often using text within AutoCAD 2012. Here is what I do, look at the attachments:
1. Create the text using the mtext tool
2. Explode the text using the txtexp tool
But, when I explode the text, lines appear inside the text like in the image. I then have to explode the whole thing and delete these lines manually. Any tool or add-on to get around this annoyance every time I insert text.
View 9 Replies
View Related
Jul 17, 2003
I'm wanting to create transparent text over a picture with only the outline of the text showing. So basically, I need to only see the stroke of the text and have be picture show thru from behind.
View 9 Replies
View Related
Sep 17, 2012
I can create a text box using the edit panel but no text will appear in the box. the pointer or curser won't appear in the box. I was able to insert text the first time I used Elements 10 but not anymore.
View 1 Replies
View Related
Jan 18, 2013
Im trying to put text into or inside a circle so it fills up the circle,i will just be using one word not loads of words.
View 2 Replies
View Related
May 3, 2013
want to put text inside an oval following or outlining the oval shape [URL]....
View 1 Replies
View Related
Aug 25, 2004
I'm trying to create a type mask in photoshop. What I want to do is to have a picture layer with a type layer on top. I want to only be able to see the parts of the picture that the type covers (i.e., if the type is my name you can see a dollyholland shaped picture - if you move the type around it will reveal different parts of the picture
View 3 Replies
View Related
Jan 8, 2006
Is there a way to get text to take the form of a shape... fitting inside the shape. Like inside a diamond so both ends are narrow. Without upsetting the perspective. Or like the harley davidson logo?
View 1 Replies
View Related
Jan 3, 2013
Is there a faster way than having the image on a background layer and positioning all the text word by word? I want to do this for the state o hawaii and have the cities make up the islands. There 8 islands and it gets to be a little much jus word by word.
View 9 Replies
View Related
Jan 13, 2009
I want to create a circle, then wrap text in a curve around the inside of the circle. How do I do that?
View 3 Replies
View Related
Jan 16, 2005
text "wrapped" around paths, but they were all along the outside. How can I get text to curve along the "inside" of a closed path (like a Circle)?
View 4 Replies
View Related
Mar 25, 2005
How do one write text inside any shape in photoshop? I want to write about 30 lines inside a circle, with the text curving inside the circular path. For that matter, how text can be written inside any shape be it polygon, star etc. I don't want to write it around the boundary alone but the text hsould fill the whole shape inside.
View 3 Replies
View Related
Mar 17, 2014
I'm using pse 11 right now. I've got a decent handle on text on shape tool. But I can't figure out how to get text inside a circle. (as opposed to around the outside) I've seen a couple tutorials that reference a little black arrow to move selections (I think within the Text tool menu) , and change orientation of text. I can't see this anywhere. I'm sure there is a simple solution, but I can't figure this one out.
View 3 Replies
View Related
Oct 4, 2011
3rd party tool which didn't match our scaling needs the file is a fas so I have tried to reverse engineer the whole function using trial and error. The following code works perfect except we need multiple (x amount) lines of text I have at current the M txt function which mimics and is effective for today however we need all lines to be individual.
I’m playing round with a loop but how to achieve my need..He had a 3rd party tool which didn't match our scaling needs the file is a fas so I have tried to reverse engineer the whole function using trial and error.
The following code works perfect except we need multiple (x amount) lines of text I have at current the M txt function which mimics and is effective for today however we need all lines to be individual.
;Starting lisp program...(defun C:REDtext ();Creating Layers (if non existant)...(command "layer" "m" "TEKST-1.5mm" "lt" "continuous" "" "c" "1" "" "");Memorising previous layer...(setq MYOLDLAYER (getvar "clayer"));Setting requierd layer...(COMMAND "LAYER" "SET" "TEKST-1.5mm" "");Setting variable "MYHEIGHT" to "DIMSCALE" x 2...(setq myheight (* 2 (getvar "DIMSCALE" )));Requesting and storing usser defind point...(setq MYPOINT (getpoint "Start punt :")); Requesting and storing user defind text...(setq MYTEXT (getstring T "Nieuw tekst :"));Placing text...(command "text" MYPOINT MYHEIGHT "0" MYTEXT); Restoring previous layer...(setvar "clayer" MYOLDLAYER);Closing lisp program...)
View 1 Replies
View Related
Nov 18, 2013
I wonder if it is possible to create a new text style where one can set the text to be already rotated.
I know that it is possible to rotate text in many ways but the styles always seem to be set on the horizontal to begin with.
C3D 2012
Win 7 64 i5
8GB RAM Quadro FX 1800
View 9 Replies
View Related
Jan 22, 2013
I'm creating a few PS actions and I wrote a piece of text that I want to show by a "insert stop" rule at the begining of every action.
Problem is this: when I copy the text (from TextEdit) and go to the dialogue box on Photoshop, text simply doesn't paste. If i have to write it on every single action it will be a neverending work!
View 7 Replies
View Related
Oct 1, 2008
I'm running a legit version of Photoshop CS2 on Windows XP. There's a number of things that haven't worked since I installed. Let's start with this one! When editing text, pressing any of the arrow keys to move the cursor creates an unwanted charachter like & '%# etc. Also, when in Move tool mode, the arrow keys don't respond at all.
View 1 Replies
View Related
Feb 12, 2014
I'm trying to do some comic-booky style text with some half tone "dots" inside the text. I've got my text, I've got my dots, but I'm having hard time getting them in the text. I've tried using "Paint Inside" and pasting them in, but then I lose the stroke and can't get it to stroke the text the way I want. I've tried a clipping mask, but that doesn't seem to work quite right either.
View 2 Replies
View Related
Sep 29, 2013
im writing text inside a shape and ive got that far ive even changed font sizes, now id like to write smaller text in the gaps between different font sizes. im using PSCS2.
View 9 Replies
View Related
Sep 14, 2011
I am using Paint Shop Pro X - the last decent version that Corel made.
I haven't done anything artistic in Paint Shop Pro in a couple of years.
I am trying to put text in a balloon, on a photograph, to show what someone is saying.
Every single thing I try arranges the text along the outside of the balloon.
All three of my books on Paint Shop Pro X and Paint Shop Pro 9 (which is very similar), the help files, and everything I can find online, specifically discuss only how to put text along the outside of a shape, or along a curved line -even though the discussion topic and associated photos often clearly show cartoon text inside balloons in the normal manner.
One discussion does show specifically how to do it; unfortunately they are written for Paint Shop Pro 5 or something, and I don't get any such dialogue box to open when I click on either A thingy on either tool bar.
Specifically how DO I put text inside a balloon in the normal manner? By normal manner, I mean, like in this post.
View 2 Replies
View Related
Jun 30, 2011
Im trying to weld text into the inside of a circle. I can weld the base lines of my text to the circle's edge but i can get the base line to follow the curve of the circle.
This is a practice design for a laser engraver. Im new to Corel and laser engraving. The shop I work at has the equiptment and software for the process and I've recently been granted access to do some personal stuff.
View 1 Replies
View Related
Feb 13, 2012
I wonder if it's possible to achive an effect similar to repel text under but instead to put it inside an ellipse, for instanse with dynamic effect of decreasing the text size as the content text grows keeping it inscribed in ellipse.
View 3 Replies
View Related
Jan 13, 2014
I am trying to make a block with text inside in it. I need the text to rotate at 0 no matter what degree I insert the block into my drawing. For example the type of blocks I use are for fire alarm in which need to go onto different sides of the walls so I need a base point in which I can insert the block at but the text to always rotate back at 0.
View 9 Replies
View Related
Apr 17, 2013
I am creating a book cover and the bottom of the page is a photo of vivid green grass.
No matter what color text I use, the text cannot be seen clearly. Is there a way to put a banner/box over part of the grass then type the text inside?
View 6 Replies
View Related
Sep 26, 2013
I'm trying to find a way to fit a text inside a shape and to align it exactly to the shape borders, I was trying to play with the justification panel under the paragraph link but couldn't make it work,
I was trying to fit my text inside a shape look like the number 7 so eventually when a viewer see it they can recognize the number 7 without a stroke - only by the text insize the shape, above is an example of what happe when I try the same with a circular shape - I would like the test to fit in nicely filling the entire circle.
View 5 Replies
View Related
