my cs5 has just started ofter using for 6 months to have a mesh over each image. when I go to view extras is ticked which I untick but when opening next image its there again.  can I get rid ot this altogether or stop this happening.
View 3 Replies
I have a dwg file of a section of a tunnel that has been exported from Microstation as a polyface mesh surface. What I am trying to achieve is cutting a hole into the surface. I am assuming that I cannot cut a surface directly, but need to convert it to a solid first.
I've searched this site and I have tried everything I can think of to no avail. Inventor does not seem to be able to convert the surface to a solid. Also, when I import the surface to Inventor, some of the triangular meshes are not there, and there are too many "holes" to patch them manually. I've also tried using lisps in AutoCAD, but on the surface and 3D faces after exploding it, but for example m2s.lsp or f2s.lsp do not seem to work.
I have also had the same file exported from Microstation as ACIS .sat, but version 18.0 is not readable by Inventor. Is there a way to convert the ASCII file to an older version?
I am using Inventor 2013, and I also have AutoCAD 2013 available.
way of opening images in CS2 where after opening they will appear in the middle of the CS screen rather then in the top left corner?
Â
I can drag and maximize so they appear in the middle, but on reopening another image they default to the top left again, I would like them to always open in the middle?
How can I eliminate the mesh screen which appears over any image I open in photoshop CS6?
View 1 Replies View RelatedHow do i create the effect above with the image behind the mesh frame?
View 2 Replies View RelatedThe entire image is what is blinking, while the photoshop tools remain on.
View 5 Replies View Relatedusing element 11 after opening a raw image the raw image editor will not open
View 3 Replies View RelatedI have an assembly that has somewhere a hole with a round bar that exactly fits in this hole. But when meshing the assembly, the mesh of the hole and the mesh of the bar are different.
The result is that the different parts do only seem to touch each other at the edges of the mesh, resulting in high stresses.
See picture.
I tried to made a derived part from the assembly, but that one does not finish meshing. After 48 hours, the progress bar is still half way. While the one above did finish in about 15 minutes. What can I do to make the meshes match?
I thought they were supposed to appear when the Polygon shelf is selected? I don't see them. In fact, when I select different shelves the menu items on the right half of the task bar don't change at all. Is this normal?
This is Maya 2011 on Mac OS X Lion.
How do I get this effect?
[URL]
So, basically, I am DETERMINED to learn how to use gradient mesh in 5.1. I tried to do that well-known red pepper exercise (I'll provide the URL if somebody hasn't seen it.) Everything was going fine until I actually tried to use the background jpg of the pepper itself in outline mode as a template. The idea is to pick up the template colors of the pepper and then use them as gradient mesh colors. No matter how I tried to do it, that trick just would not work.
Â
If you are working on a gradient mesh and are using image template as a guide you want to work in outline preview so you can see the underlying art to determine wht you are constructing and also it then allows you to use the eyedropper to sample the color of the actual photo so it can be translated tothe mesh and you can simply switch back to Preview mode to check your progress.
Very handy when working with gradient meshes if you are using and underlying template to translate into art.
Â
That sounds great, but sampling the color of the photo and then actually using it on the gradent mesh points just did not seem to work for me.
Is there a way to overlay a transparent background png image on a solid or mesh that already has a material assigned? Â i.e. a chrome object with a decal applied. Â I have tried creating a new material using my png file as the image but have not been able to overlay it on an object where I want to see the material underneath.
View 1 Replies View RelatedRight clicking on image in LR4, then selecting open with CS6. CS6 program starts fine, but no image? If I select CS5, it works fine.
Â
Also, I tried a workaround, by exporting the file to my desktop (DNG). Right clicking on the image, and selecting CS6, again will not open the image? If I open CS6, then Menu>file>open, all files are greyed out until I select "all documents" in the enable menu?
I have saved a large image on a CD as a psd format. I cannot open it at all. I am using the same computer to open it (with photoshop on) that I used to save this image.
Am I buying the wrong type of CD that is, perhaps, too small to handle a large file such as this?
I know that I should have made the image smaller before saving it but I forgot.I now need to open it because that is the only archived sample that I have.
I had a client send in an ad in pdf format. When you look at the preview on the screen all the images are there, however when you open it in photoshop one the words disappears when I try to open it in CMYK mode (that's how it was saved). However, when I open it in RGB mode all the words are there, then I can convert it to CMYK. I'm just trying to figure out why it didn't show up in CMYK but works in RGB mode.
View 4 Replies View RelatedI had a client send in an ad in pdf format. When you look at the preview on the screen all the images are there, however when you open it in photoshop one the words disappears when I try to open it in CMYK mode (that's how it was saved). However, when I open it in RGB mode all the words are there, then I can convert it to CMYK. I'm just trying to figure out why it didn't show up in CMYK but works in RGB mode. I'm running Snow Leopard (10.6.8) and CS5. Client used ID to place the ad on template. I have given all the info needed to aid in finding a reason to this. Could it be that the image was not flatten?
View 10 Replies View RelatedI have Photoshop CS4 Extended, and no matter what I do I can't open it without having the photo from the previous session loaded in the main window. Again, I just want to open PS without any images in memory. How do I do that?
View 7 Replies View RelatedEvery time I open an image with my PS extenden edition CS6 the image is not completely shown, I have to or duplicate the layer (backgroud layer)or remove it out of background only than the image is completely displayed. see example
the problem is similar with files in RAW format (NIKON x.nef) see
I already reinstalled PS but dit not solve. Looking for updates on the product, no missing updates (it looks like I have the latest available version.
There is an image that keeps opening automatically when I open CS6 Photoshop? Why is this happening for only that one image? How do I stop it?
View 5 Replies View RelatedCan I open an image from the internet, instead of saving it to my PC first, then opening it?
View 14 Replies View Relatedwhen i open any image in Photoshop CS4 in my computer they appear like this :
If i open the image in another software it's all ok.
I've already reinstalled photoshop but everything still the same.
I have just installed CS4 Masters collection and using on a
windows XP professional ver.2002 service pac 3.
After opening any image on Photoshop, it shows in a yellow shade, the whole
image. Cannot do anything to get rid of it. This makes it impossible to
work on as the colors are all messed up.
I have received images from my client which are edited & saved in CS4. But when i m trying to open these images in IE its not opening, but it is opening in Firefox. Wat is the solution for this?? I m here attaching a file in which i have shown the screenshot of IE and Firefox. And also the properties of images saved in CS3 and CS4.
View 1 Replies View RelatedOn opening a photograph in CS6, the image is incomplete.
Â
I have just installed Photoshop CS6 (hope I'm not going to live to regret this), apart from the problems with installing plugins, when I open a file the image is incomplete with anything up to 25% of the image missing. If I create a duplicate background copy the problem is resolved. This is not satisfactory on software of this nature.
photoshop CS5
Â
new 17" toshiba laptop  (this was not a problem on my previous/old laptop)
2 gig Video Card:Â nVidia Gforce GT 630M/PCIe/SSE2
12 gigs of ram
Â
First ?:
How do I get drawings I've just opened to float (rather than pin themselves to the top left of ph-shop?
Â
Second ?:
When I open a photo.... work on it.... open a second photo....It opens and appears as a blank pallet, (as if there's no picture) but.... when I grab and move the image window with my cursor at the top border, the image appears... then when I release it placing it where I want to move it... the image disappears again. The image is visable the WHOLE time within the navigator panel.
Â
I then have to restart CS5 in order to fix it... but then it'll happen 10 minutes later.
This just started happening and I don't know if I inadvertently have changed a setting. I open a file in Photoshop and the file is obviously open because I can see it in the history or layers panel. However it does not appear on the screen. I've tried changing my viewing and other things, and it just isn't there.
My only solution is to shut Photoshop down completely, reopen Photoshop and reopen the file. Very inconvenient.
I have been using Photoshop for years with no problems. I had to reinstall it a couple of time due to my PC having problems. But this is the first time i have had this problem.
Â
I open an image and it is transparent. All you see is the boarder. When i select the boarder you can see the image, but as soon as i click off the boarder it disappears.
Â
This image shows that you can not see the picture, but there is a file and an image, as you can see the layer on the right with a picture in it.
This has never happened before, i assume that there is a setting to be changed, but i cannot find it.
I've been using CS4 Extended for 3+ years with no problem, and suddenly it is giving me the message, "Adobe Photoshop CS4 Extended has experienced a problem and must close..." This also happens when I try to set Preferences. I'm using XP 5.1, SP3. I've installed the latest updates, but the Camera Raw 5.7 update fails to install.
Â
Here is my system info:
Â
Adobe Photoshop Version: 11.0.2 (11.0.2x20100514 [20100514.r.591 2010/05/14:02:00:00 cutoff; r branch])Operating System: Windows XP 32-bitVersion: 5.1 Service Pack 3System architecture: Intel CPU Family:15, Model:2, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2Physical processor count: 1Processor speed: 2524 MHzVideo Card: NVIDIA GeForce4 MX 420Video Mode: 1280 x 1024 x 4294967296 colorsVideo Card Driver: nv4_disp.dllDriver Version: 6.14.10.5216Built-in
[code]...
Before, whilst in Google Inspect on any webpage I could drag an image onto the Photoshop application icon on the dock = opens up in Photoshop + with PNG transparency.
Â
Now this has stopped working for an unknown reason about 2-3 months ago after updating. I'll drag the image over the application icon on the dock as before, but then nothing opens. As a result, my workflow is now more inefficient and inconvenient. Â
I am currently using Adobe CS3 Design Premium with Windows XP Pro as the operating system. The computer is a self build and has 2GB of RAM, 450GB of onboard HD storage and 6x500GB of external HD storage.
As a photographer I frequently end up with anything between a 100 and 300 RAW images after a days work and convert them to DNG, Tif and JPEG files.
With CS2 I ran an action which opened the image in Camera RAW which then enabled me to make adjustments before opening the image in Photoshop and completing the other elements of the action. Since upgrading to CS3 I have been unable to create a similar action and having read the "knowledge based" information and looked through the topics in the forum have failed to find anything that is of help. As each image and the conditions under which it has been taken differ it is quite important to make corrections in Camera RAW before completing the action in Photoshop and fixed settings applied by Camera RAW would be inappropriate.
It is always possible that I am making a fundamental error in writing the action but given my previous experience it seems unlikely. Incidentally I usually bring up the images in Bridge and then select the best images to process and start the action from Bridge.
Before PS4, I could open image files in their own windows. In PS4, when I want to open more than one file, these open with tabs and any new file I open is added to the tab queue. It is annoying to right click on each tab so each file is in its own window. Is there a universal preference to change this annoying behavior?
Using a Windows environment with Photoshop CS4 Extended.
