Photoshop :: Devil's Tail In Text
Feb 1, 2005I am creating some logos and was looking for someone who knew how to create a devils tail from a letter I want to let the letter S end in a devils tail like a comic book style.
View 9 Replies
ADVERTISEMENT
Photoshop :: Making A Boat Tail
Jul 24, 2008I need to desiign a "rooster tail" effect for a boat designer's web site.
I guess I can best describe the vision of having a boat cruise across the intro page screen with the wave it creates behind it.
Photoshop :: How To Make Tail Effect Of An Image That Goes Sideway?
Mar 16, 2005how to make an tail effect of an image that looked like it had moved from point A to point B, leaving behind the tail line in a form of a ghost effect. I was wondering about making a curve line that start small at one end and become bigger at the other end...
For example, a fly that is buzzing around and we would see the line but instead of a line, it would be a shadow of a fly along the way.
Photoshop :: Stacking Layers Top-to-tail To Create Long Banner Print Of Software Code?
Aug 31, 2013I have lots of software code (in tSQL, html, JavaScript, XAML, and C#) that I need to print in a long scroll. The scroll will be no more than 440mm wide and as long as it needs to be (though the roll of paper is 45 m long so I’ll need to make sure it is shorter than that).
The resulting code listing is to from part of an exhibit contrasting the ‘sketching’ phase in a multidisciplinary project between design, social science, and software engineering. The exhibit will form part of the Research Through Design conference [URL]...
At first I thought I’d print straight from the development environment (Visual Studio 2012 and SQL Server Management Studio) but I realise now that is not possible because
1) Both tools assume standard page sizes, and
2) I need to rotate the software code listing 180 degrees so that the end of the listing is at the tail of the paper roll.
For these reasons I’m doing it in Adobe Photoshop (CS5, 64 bit, on Windows 8).My workflow for this is verging on the ridiculous.
1) If I cut-and-paste the code listings file by file from Visual Studio 2012 and SQL Server Management Studio into Photoshop (or Illustrator) I lose the formatting, for example the coloring of comments differently form variable declarations. (See [URL]...)
Thus Step 1 is to cut-and-paste each file into a Microsoft Word document.
2) If I cut-and-paste from the Microsoft Word document into Photoshop I still loose the formatting, and Microsoft Word does not seem to be able to cope with the paper roll nor rotating the print. So I save the Microsoft Word document as a PDF and open that into Photoshop.
3) I now have 51 Photoshop files each with one layer containing the text for that ‘page’, though I think it’s an image as it is not editable as text. I then save each of these files.
4) Using Adobe Bridge I open all 51 Photoshop files created in Stage 3 and “Load Files into Photoshop Layers” so that I have a new single Photoshop file with all 51 text image layers in.
5) The layers sit on top of each other. What I need is for them to sit head-to-toe. I don’t know how to do this without spending a million years selecting layers and moving them by hand.
6) If I ever get Stage 5 done I will then group the 51 layers and rotate the result through 180 degrees.
7) I will then resize the result to have a width of 400mm and print the resulting file on our banner printer, having first calculated the resulting paper ‘height’ and turned off the automatic paper cutting.
So my questions are:
1) Is there a better way of doing this?
2) I can see the Photoshop actions that will align layers by their tops, their bottoms, or their centers but how do I automatically align them so that the bottom of layer 1 touches the top of layer 2, the bottom of layer 2 touches the top of layer 3, etc.?
Revit :: Possible To Use Both Horizontal And Vertical Section Tail In Same Project
Jul 3, 2013Can I have use both the horizontal and vertical secton tail in the same project? When I change the tail in one system family it changes the tails on all the types.
View 1 Replies View RelatedAutoCAD Civil 3D :: Hold Leader Tail Rotation?
Nov 20, 2012What setting controls the rotation of leader tails? Specifically in point labels. My dragged point labels maintain their orientation, as I want, with Plan Readability set to False and Dragged State Components - Display set to As composed. But the leader tails are horizontal to the view rotation.
Civil 3D 2012 SP 2.1
Dell Precision T7400
Xeon CPU 3.16 GHz
Nvidia Quadro FX 4600
12 GB RAM
Win 7 Pro, 64-bit
GIMP :: Animated Flame Added To The Back / Tail?
Jan 7, 2014Here the original
Here the version im working on.
How I can get a animated flame added to the back/tail.
AutoCad :: Draw Splines Creates A Jog Or Tail In Drawing
Sep 13, 2012Sometimes, not in every drawing, but in certain drawings when we draw a spline it creates a jog or tail.
So when we do the command spline and click the start point then move to do the next point it will have this jog or tail at the beginning of the spline. sometimes we get it at the beginning and sometimes at the end.
How do I make it stop? is there a setting that I need to change? We typically work on drawings from Architect / Engineers.
Illustrator :: How To Erase Portion Of Font Letter Tail
Nov 7, 2013I want (no need to!) erase the long tail 'f' on my this logo. So I added a white text box and filled it in. (see figure 2) That worked until I wanted to put the logo on a colored background.
I originally did this on Microsoft Word. The Illustrator people told me that this would work and so I spent a boatload of money this stay at home mom does not have.. and now I'm awfully frustrated because 14 hours later....lots of tutorials later. I'm back to square one.But, I did learn a lot of info that I don't need to know.
Besides the fact that I looked at about 5,000 different f's in fonts.
AutoDesk Smoke :: Export Video Segments With Extra Tail And Head
Feb 12, 2013I have a timeline and I want to export each video segment as separate videos with 4 sec extra head and tails.
How do I do this?
AutoCAD Inventor :: Model Tail Fin (vertical Stabilizer) For Aeromodel Design
Feb 7, 2013I was trying to model the tail fin(vertical Stabilizer) for an aeromodel design. I inherited a dwg file of the tailfin with some poorly defined ribs that shape the fin. The fin tapers back and up.
My problem - I need to put in a brace which starts from the front of the lowest rib and goes back and up to the front of the topmost rib. and a pair of slots similar to the ones already modeled but further up towards the front. I hoped that a sweep feature on the assembly would do it but i am unable to create a rail and constrain it properly.
Another issue i had was to model a plastic film covering for the fin. An aeromodel uses a heatshrink monokote film. How would i model something like that in inventor.
The requisite files have been uploaded to dropbox.-
[URL]......
[URL].......
AutoCAD Inventor :: Finding Style For Weld Symbols And Weld Tail?
Aug 9, 2013I know you can change the leader style and the text style in a weld symbol...I can't seem to find a style for the parts?
Specifically I'm trying to change the color, I'd like the enirety of my weld callout to be a different color...just for visually tracking and locating on the drawings.
So if I change it to orange...right now the leader and text are orange but the weld symbol itself and the tail are still black.
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
Photoshop :: Copying Text From Outside Text Editor And Pasting Into CS5 Text Layer?
May 20, 2012trying to copy txt from an outside text editor and pasting them into an open, editable text layer in my workspace. The problem is that I can COPY the text fine, but when I click over to PS to paste it into the open editable text layer it either pastes the previous text from my clipboard OR it won't paste anything at all. I can then go into any other text field on a browser, spreadsheet document, a different text editor, notepad, etc and successfully paste the proper batch of text I wanted to paste into PS. Sometimes I have some rather large files open 50+megs when I notice this happen. I have to save my work and close out entirely of PS and then open it again before I can begin editing my original document again and successfully paste the text into the open editable text layer. This may last for a few COPY/PASTE sessions of additional text in additional text layers, but then begins displaying the symptoms I described above.
I am on Win7 on an AlienWare M17XR3 laptop with 16G RAM and AMD Radeon HD 6900M Series display adapter.I assume it's either in my PS performance settings which I have PS using 10413MB RAM and has over 350G scratch disk space. If it's not that I guess my laptop system performance settings which I've never tinkered with since I purchased it.
Photoshop :: Text Layers :: Unable To Open The Text Box To Change Text
Sep 12, 2007Using CS 2 on Win XP
Simple question:
am trying to edit a text layer but i am unable to open the text box to change text.
It creates a new text layer everytime i click on the layer.
Corel PHOTO-PAINT X3 :: Text Container Closed Shape For Text Won't Allow Text Inside
Jun 4, 2011Text is allowed only on the outside of a rectangle shape. The text cursor disappears when I try to enter it into the rectangle and when I place it on the edge of the rectangle, it rurns into a slanted "A" and allows texting on the border of the rectangle. Corel Paint Shop Photo Pro X3 (build date Sept 7, 2010). This software came with my new HP Pavilion dv7.
View 1 Replies View RelatedIllustrator :: Align Text Horizontally And Vertically In Text Box - Text Slightly High Of Center
Jul 9, 2013When you centrally allign text horizontally and vertically in a text box, the text sits slightly high of the centre. Is there any way of setting an action or setting to deal with this rather than adjusting by eye every time?
View 4 Replies View RelatedCorelDRAW / DESIGNER SDK :: How To Wrap Text Inside A Text Field / Paragraph Text Using C#
Feb 1, 2013I have designed a C# application to To Print I Cards Of School. Here I am sending data from my application to a CDR FILE (Already Created ) Which Contains ADDRESS Text Field..Now I Need to Print Address(which contains 60 characters or more) on this Text field .
I Have Used The following c# Code.. To Replace Address text field that contains text 'Address '.....
s.Text.Replace('Address',"Text To be replaced .......")...here s is Active shape...
This Works Fine But How can i WRAP TEXT....of Address field.
AutoCad :: Insert Text With TEXT Or MTEXT Command The Text Is Displayed Mirrored
Apr 9, 2012When I insert text with either the TEXT command or MTEXT command, the text is displayed mirrored. This doesn't seem to have anything to do with the MIRRTEXT variable because that is used when I'm actually mirroring the text. In my case, the text is mirrored as soon as I insert it. How can I get it back to normal? Is there a variable I'm missing?
I'm using AutoCAD LT 2012 .
GIMP :: Text Tool Changes Text Properties When Paste Over Old Text Content?
Nov 2, 2012i switched gimp 2.6 to 2.8 and new text tool behaves strangely, as i remember in gimp 2.6 when i try to change text content with selecting old text and pasting new text i could use same text size and same font with my old text without doing anything but now in the gim 2.8 whenever i try to change content of a text layer i need to choose again font and text size from toolbox options, but why do i have to do this, i have a text placed on my image with a certain font and certain font size and i just want to alter my text conten not the size of text or font , it changes automatically to back text size and font whatever i used last time in another work.
summary: i want to change my text content without setting my font and font size properties, i want to use my text layers old properties
Photoshop :: Using CS5 Dropdowns Black / Gray Text / Some Positions Require Hover To See Text
Nov 22, 2013Using CS5, dropdowns are black, gray text, some positions require hover to see text. How to fix?
View 1 Replies View RelatedPhotoshop :: Typing Text Turns Entire Image Red And Uses Wrong Colored Text
Aug 26, 2007Any ideas how ot fix this? Every time I try to enter text, the edges of the text is surrounded/selected with lines going around it....how do I stop that and have it stop turning my image red (Its supose to be brown, until I click it then it turns red), it isnt even using the correct colors that I set it at.
View 2 Replies View RelatedPhotoshop Elements :: Entering Text / Mega Spaces Seem To Be Default Between Lines Of Text
Mar 19, 2013when entering text, mega spaces seem to be a default between lines of text. Changing the leading does nothing to correct this. Thinking that my software became corrupted, I deactivated and reinstalled. But the problem persists. If I type the text into Word, cut and paste into PSE10, the problem continues.
View 1 Replies View RelatedPhotoshop Elements :: How To Edit Text In Selected Large Multiline Text Layer
Jul 16, 2013Running PSE 9 under Mac Snow Leopard.
I have a family photo including many text layers. I'm trying to edit the text in a selected large multi-line text layer. I'm following the steps from the appropriate PSE article, but I always end up creating a new layer and the red/green no-go/go option. I thought I should just be able to double-click the text layer and start editing.
Photoshop Elements :: Adding Text To Photo - Typed Text Is Not Visible On Layer
Oct 6, 2012When attempting to add text to a photo, the typed text is not visible on the layer in the "Layers Box" until exiting the Text Tool. Text nexer is visible on the photo Background image. If the edited image is saved, the added typed text is not saved; only the original Background image. How do I reset the Text Tool so it will be functional?
View 3 Replies View RelatedPhotoshop Elements :: How To Reset Text On Image Back To Basic Black Text
May 20, 2013Using Elements 9 I was adding black text to a .jpg image. Somehow during the process, the text being entered defaulted to a "wavy, illegible set of characters". Spent 30+ minutes looking at FAQs and have given up. I want to reset to default simple clear black characters. Closing and restarting Elements does not resolve this issue. When ending a newly entered set of text - still get "wavy, illegible set of characters!"
View 6 Replies View RelatedPhotoshop :: CS6 Text Layer Names Not Updating To Show Actual Text
Sep 26, 2012I've got some Text Layers in my CS6 document.
In CS5, if I had Text Layers and changed the text on the layer (by double-clicking the "T" icon of the specific Layer in the Layers palette), the name of the Layer would change to reflect the new text I entered.
For some reason this behavior is gone in CS6. So, for example:
• I have a Text Layer with the word "Email" on my canvas. The Text Layer name also reads "Email".
• I double-click the "T" icon of the Email Layer to edit the text on canvas.
• I enter new text, "Contact". The text on canvas updates to "Contact", but the Layer Name remains "Email".
So, for accurate Layer names, I find myself having to change the text twice: once on the canvas, and then manually updating the Layer name as well. Is there an option or preference somewhere that I'm missing that would re-enable the behavior from CS5?
Photoshop :: Export Text InDesign To PSD And Preserve Text Edit Ability?
Oct 2, 2012Is there a way to export text from InDesign to Photoshop and preserve the type as editable text in an area text box, similar to the export to PSD in Illustrator? Designed many web site pages in InDesign, and now need to covert all pages over to Photoshop quickly.
View 4 Replies View RelatedPhotoshop :: Text Edit Area Appears As Inactive / Text Box Invisible
Apr 29, 2012I'm having this strange issue with the Photoshop type tool in Photoshop CS5. It might be, although I'm not sure, a bug. The tool itself is working and lets me add text and edit. But the box that shows up when editing text (and the blinking line that shows where I am in the text) - has gone invisible. I am having this issue in only one document. - I tested the type tool on other documents, and everything was normal. I've looked up shotcuts and hotkeys to check if I've tapped a key or something, but it doesn't appear to be so.
Now about the document; it does have quite the amount of text layers, and a lot of text in them. I've tried resetting the type tool, and I've restarted the program.
When I restart the program, the tool works as it's supposed to - but after editing or adding a new text layer, the editing area is gone again! Is this a bug, or have I touched keys that do odd things?
Photoshop :: How To Stop Text Layer From Turning Black While Editing Text
Nov 16, 2013Photoshop CC up to date
5 years PS experience
Restart of file and PS didn't resolve the issue
Creating Smart Object didn't resolve issue
When attempting to add simple text on an individual layer, the layer is turning black. This prevents me from seeing the text I'm editing. When I move to another layer the text displays correctly. When I go to edit the text by clicking the image the layer goes black again. It is like editing text in the dark, turning the light on to see the changes, turning the light off to make the changes, repeat.
Photoshop :: Create Transparent Text Over A Picture With Only The Outline Of The Text Showing
Jul 17, 2003I'm wanting to create transparent text over a picture with only the outline of the text showing. So basically, I need to only see the stroke of the text and have be picture show thru from behind.
View 9 Replies View RelatedPhotoshop Elements :: Lock Text Boxes So That They Maintain Proportions Even When Entering Longer Text?
Mar 25, 2013I am creating subway art and am creating various templates. I would like it so that when I have a text box with a 5 letter word, and I want to enter a longer word, they all fit and just kind of smush together rather than me having to fix the text boxes constantly.
View 4 Replies View Related