Photoshop :: CS6 Disable Compression Of PSD And PSB Files - 8 Bit Files Too?
Aug 19, 2012
I'd like to know if the new CS6 Preference which allows users to "Disable Compression of PSD and PSB files" applies to 8 bit files.
The reason I am asking is that the DisallowFlateCompressedPSD registry change for CS5, which disables compression of PSD and PSB files does not work for 8 bit files (it only works for 16 bit and 32 bit files)I work on large 8 bit files (4-8GB) and would like to know if CS6 would allow me to disable compression on those files.
For years I have been enabling Use Compression when saving files. I am not sure exactly what it is doing but I do know that file sizes can decrease dramatically. I have seen 100MB files got down to 10MB.
Well the other day a coworker told me to always disable that because he believes that any embedded images will be compressed and lose quality and/or have problems ripping with Nexus or Odystar.
Is that true? Illustrator Help says that the pdf information is compressed when enabling it. So are there any disadvantages?
I have thousands of tiff files in my LR 4.1 catalog. I'd like to convert all of these files to tiffs that use zip compression. Preferably, I'd like to do the conversion in-place but LR won't allow me to overwrite the originals in-place.
So, I think I have to either export all of the images and either add them to the catalog during the export process *or* manually import them again.
I do *not* want to lose any of the LR edits I've made to these files and I think I will do exactly that if I use either of the conversion methods I noted above.
I use CS5 on Win 7 64-bit. Today I learned about this option to disable file compression to speed up save time:
[URL]........
I downloaded the reg key and installed it. When I restarted PS to test it on a file, there was no difference in either save time or file size. The test file is a 300 MB multi-layered PSD file.
Is a way to disable Photoshop from opening two files with the same name?
Test this:
Open Photoshop. Create a quick file. Save on desktop. Do not close the PS file. Open Illustrator and place your PS file. Now "option double click" the placed image in Illustrator to edit original. BANG. You now have two identical PS files open.
I have read several forums about how to disable the auto-recovery feature. However, I don't want to disable the auto-recovery because I like that it saves my work in case of crash.
It's just annoying that every time I open Photoshop all those previous files auto open. Is there anyway to make it stop? I read that there is a file that you delete, but will that stop the auto-recovery feature?
Is it possible to disable the dialog for choosing how transparency is treated ? If you to batch operations on EXR files you have to confirm for every file!
I have an Olympus OMD EM5 and I notice that when RAW files are imported into Lightroom, an automatic correction is applied by default. It appears to read this directly from the metadata of the RAW file. How to disable this?
The issue is that this correction means that the RAW files in Lightroom differ from both the camera viewfinder and JPG output in terms of composition - sometimes barely so, and sometimes significantly depending on angle, zoom etc. This is undesirable behavior in a lot of instances where you want the RAW to match your chosen composition.
I have recently output a job to print that was supplied .AI with a simple .TIFF image placed on an artboard at its desired crop.
After referring to the original TIFF file I have realised whilst inside illustrator my image suddenly has a clipping mask attached to it, and a lot of it is missing. (however in outline, illustrator only see's a single TIFF bounding box)
Looking more closely at the TIFF in Photoshop, i've found it has x3 paths inside it!) Illustrator is picking these up and masking my photo. Is there a default function or process that can stop this from happening in the future, so it ignores any paths within the file?
I got over 160 color corrected RAW files from my photographer when I thought I was getting TIf or PSD files. I need to put them into an in design doc to send out for printing. Is there a way to convert all of these in one fell swoop without messing up the work that has already been done?
I didn't allow in my timing to save each one individually since i didn't know I was going to need to do this. I am really unfamiliar with batch processing, so how to best go about this, or if I even can. I am working in Photoshop CS6. version 13.06 x 64.
I am using Photoshop Elements 10 Version 10 (20110831.m.17215) and everytime I plug in a memory card to upload images it wants to upload every image on the card, even though it has previously uploaded images from that card, even though I have the "Copy New Files Only (Ignore Already Imported Files)" box ticked in the preferences Camera or Card Reader section. This gets very frustrating and time consuming when I have to go through the images every single time to uncheck the images that have already been uploaded.
Photoshop CS6 Extened won't play or process Dolby Digital (AC-3) Audio Files from my AVCHD video files.The video plays fine just no sound at all. When processed still no sound. Are there any (AC-3) audio codecs I can download and install. How would I install them. Do I need to convert audio files to another format & if so how & what format.
After getting no support from your phone support line. I am writing here in hopes that this issue can be resolved. I cannot open files or create new files in Photoshop CC trial.
I am working on a museum project. I have been asked to convert full resolution files to web based files using "Save for Web and Devices". The problem is in the file naming. Museums typically use accession #s for each work. Example 1999.63.102 So the digital file would be named 1999.63.102.jpg (or tif).
When I attempt to save the file using "Save for Web and Devices" the resulting name is converted to 1999.jpg I believe the . (periods) to be the culprit. There are hundreds to do so renaming is not an option. This does not occur when I use "Save as".
PSE 12 has a new feature under Preferences/Camera or Card Reader called "Alutomatically Stack RAW and JPEG." Checking this will stack a RAW & JPEG file combination, i.e., when shooting with the camera's RAW + JPEG setting checked. In my case PSE 12 appears to stack my Panasonic RAW files and each JPEG thumbnail shows the right facing arrow to expand the stack. When I click the arrow the arrow disappears but the stack does not expand to reveal the RAW file. The RAW file still exists on the hard drive, but I can't find any way to reveal it in PSE (I've not tried to re-import the RAW files because there are a lot of files in a lot of folders.) This is rather critical and needs to be fixed.
I have a fairly new Panasonic Lumix LX5. I've recently converted a few files to DNG. They're turning out to be @ 37MB, over three times larger than the original file.
I'm not embedding the original raw files in the DNG. NEF files I convert from my Nikon D2x are around 9.5MB. I'm running Mac OS 10.5.8, DNG v 6.6 and also use PS CS5.5 and Lightroom 3.0.
Resetting the User Setting with the the F8 key didn't solve the problem. Once the user gets caught up on a couple projects I'll try to update the version to SP3 and the hotfix.
Will the current plugins for Sigma DP1/2 RAW files work with files from the DP1/2 Merrill cameras? And if not, is Adobe developing plugins for these cameras?
My main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
After many years of using LR this is the first time I've encountered this issue (see 1st screenshot below). LR is scrambling my files. The affected raw files open fine in other programs, including adobe photoshop cc (see 2nd screenshot).
Deleting files and saving files brings up an error message. Files can't be deleted from lightroom which makes editing a nightmare. Also Saving Files (raw of jpeg), brings up an error message everytime.
I have loads of dwgs made by a former employee at another site that have our company logo in the tile block. I need to replace the company logo with a new one. If it were not made from a dwt, I could change the .dwg file and just reinsert the block and let it redefine the block, done. But since all of the text in each drawing was input using a template, I cannot do this without losing all of that data. We are not permitted to explode the title block, delete the old logo & add a new one as the drawing format needs to remain as one entity. Is there a way to automatically update these dwgs without re-entering all of the title/revision block text on every drawing?
what is the command in AutoCAD 2013 for exporting drawings as DWFx files so that clients who do not have AutoCAD can open or plot a DWFx file using a current version of Internet Explorer or Safari for Apple as an alternative browser.
I have just recently installed AutoCAD LT 2014 on Windows 7 (Running on an intel iMac through Bootcamp). Ever since then i am receiving notifications when performing a save.
AutoCAD is telling me it cannot perform the save and is creating a .tmp file in the same location on the server as the file should be.
this is causing major performance issues and happens almost every second time I attempt to perform a save. The issue is that we are getting multiple versions of the same file duplicating on the file server which is very quickly going to cause capacity issues considering most files are 2-4mb in size.
Deleting temp files, if I can just do a blanket Erase, or will this potentially damage autocad drawings. My temp file is on my local drive, but all of our drawings are stored on a network drive. It seems to me I remember these things storing up over time with crashes, etc. But as they build up performance seems to dwindle.
These files range from .tmp files to Texture folders, .cvr files, and nonsense names like A$C5DCD5F31.Can I just window and Delete All?
I am trying to attach a number of tiff files to individual dwg files. There are about 300 so I am writting a script that will open a new dwg, insert the tiff and save the dwg at a given name, so i have filedia set to 0 and everything is user input.
The problem I am having is that when I use the iinsert command and enter the path for the tiff I get this error: (filename)was not found or is not valid. This is pathed to a network drive. When I copy the same folder to my c: drive and run the command everything works as should. is there any reason for this?
When pathed to the c: drive and working correctly it looks like this:
G:EngineeringCURRENT JOBSMOTIVA11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70 was not found or is not valid.
I noticed in the error message it cuts the end of the file name off. Is there a character limit?
I have done this before with a path to the network and everything worked as should. We have recently upgrade to 2013 but i would'nt think that would be an issue.
So basically, file on local drive everything inserts fine. File on network, get error.
