I work with full screen mode, and the only place I see the file name is in the history palette and it's usually cut off. anything I can do without having to go to standard screen mode.
View 5 RepliesSo, this is something that's been a nuisance for a while now, and I think it's time for me to inquire seriously about a fix for it. I'm working with some ani's in max's timeline, and everyso often I find it starts to make use (or I start to make use...?) of "ticks"...I really dont wnat them, and in fact they cause a whole bunch of issues when adjusting keyframes as Im sure some of you can imagine.
Im not sure if it does this because of a setting I choose ( I always start animating in frames mode), or because I often will work in Key mode when Im swapping in a certain pose often...since all my character's animations are in one timeline.
The big question is...is there a way to FORCE these "ticked" keys onto full frames somehow? I've looked through all the timewarps I can find, and adjust <i>their</i> keys to full frames, but eventually it still goes back to ticks....WHAT MUST I DO!!!!! maybe there's a script, or Im missing something obvious?
I keep resetting to frames mode, and rechecking timewarps...to no longterm avail.
I'm trying to update a part with different colors for various features. My color styles are not available in this file. I can export them from another file, then use the import function to bring it over, but there has to be a way to force this file to find the entire "default" color file.
View 6 Replies View RelatedWhen I send a file to Ps from Lr, edit that file then save it, Lr puts that file at the end of the line instead of next to the file I was working on. When you have 600 photos in a down loud, it is a pain to scroll through the photo's to find your place again.
Is there a setting to force the saved file back in line next to the file that was edited in Ps?
Is there any way to force Snapshots and Virtual Copies to read metadata from the original raw file after an update of the same?
I had to change the lens name on some Leica M9 files to correct an operator (me) error, and I did it by editing the exif data with an exif editor and then forcing LR4 to read the metadata from the file. This worked well for everithing but the snapshots and the virtual copies on which the metadata remain as originally registered, unchanged.
I was wondering if there was an option to set Inventor to display the full file path for the current file open ? At present I am only seeing a short description of the name of the active file - I wish to see it's full file path similar to what AutoCAD displays.
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I'm new to scripting What I want to do and don't know how to go about it is to run a script that collects the saved file name and the full path where the file is saved on the network and displays it on my document.
View 2 Replies View RelatedI am working under Windos XP pro with Radeon X1950 pro and two screens 22"
My two problems :
1 - Opening a New file:
When I open a new file, I cannot obtain a full screen image as I did in previous versions of PS. May be because I use centimeters dimensions?
2 - In the "work space " (Is it right in english ?)
When I choice "affichage" and then full screen for work space, the image I get is much larger but not entirely full screen..
I can't figure out how to adjust the size of the program screen when in Full Edit Mode. I can see portions of the Quick Fix menu and none of the Guided Fix menu. There seems to be no way to resize the window.
View 5 Replies View RelatedEverytime I try to save a file in PS it tells me I can't because the disk is full.I have to save it to the desktop and then cut/paste it into the folder I want.So annoying and time consuming! been doing this for months. How can I correct this?
View 12 Replies View RelatedUsing PS CS6, Windows 7 x64.
I was under the impression that when hovering my mouse over the document title bar, I would see a tooltip showing the full file name, including the path. This isn't happening and I'm wondering if there is a way to do this. I know I can click File > Save As, or Ctrl+Shift-S to see the full path, but hovering over the title bar would be easier. (What I am seeing now in the tool tip is the file name, % magnification and which layer I have selected. Basically, the tool tip is just showing what's in the title bar without hovering.)
Just downloaded Elements 12 (and uninstalled Elements 7), so just starting to figure it out. Main interface is a bit different. Got 2 issues:
Where is the 'Display' button that loads the full file for viewing (not an enlarged thumbnail)? Used to be at top right in version 7.
When I try to run a slide show the program shuts down; pretty serious issue.
my camera (Canon S95) has a sensor with 4:3 aspect ratio and thus saves all RAW files in this format. Additionally, the camera can automatically create JPGs with a cropped ratio (e.g. 3:2 or 16:9). This is very useful because you can see the target format already on the camera screen (with black bars on top and bottom), which facilitates the composition. However, when processing the photos on the big screen afterwards, it often also facilitates the photo to adjust the ratio a little bit and therefore use the additional information saved in the bigger 4:3 RAW file. This works very well with many of the freely available software tools.
The problem found in Lightroom is now that it only shows the RAW photo in the cropped format and up to know I have found no way to display or use the full RAW format. So my question is: Which settings do I have to change to use the full format? What do I need to change?
I want to re-edit -remove some parts, adding a title- a fullhd VSX3 rendered file which looks and plays perfect. I never have problems with VSX2/3 even when re-editing. This time, it first takes seconds before it opens in the preview window when I click the library tumbnail. It freezes (with created or without smart proxi) for several seconds when I try to cut, or whatever on the timeline.
It only gets somewhat better when de-selecting "audio while scrubbing", but remains still much more "freezy" than all my other (rendered) files. It's a ~2.5 Gb AVCHD file rendered at 18Mb/s VBR in VS. The only thing what is different is that it contains (pre-converted to AVXHD) SD parts from a JVC camcorder (.mod), but it all plays back flawlesly in several HW and SW players.
When I open an Illustrator document it opens full screen - meaning the top left corner of the document is at the very top left of my screen, (behind my tools) - and the bottom right is at the very bottom right of my screen (and behind my palettes).Is there a preference setting so that a file would open in the middle of my screen - NOT full screen?
View 11 Replies View RelatedI am new on illustrator. My boss asked me the .ai file to be full plotted and locked. What does this mean and how can I do this?
View 5 Replies View RelatedI'm transferring a 1st draft book from a PDF file by copying and pasting text and photos. So far, so good.
During the pasting process, I've selected to maintain fonts and formatting. Despite this, the text gets pasted with only some of the formatting and some correct fonts. But that's easily fixable.
All the text, now in X4, is Left Justified. The author has requested that it be Full Justified (looks better). When I select a paragraph and Full Justify it, the words/lines shrink further to the left. Altering the Spacing from the default 60% to 100% allows it move to the right, but not all the way to the right of the text box.
I've tried hyphenation. Still, there's a limit to how far right the text is allowed to go.Force Justify stretches it all out fine, but the spaces are too big between the words.
I made a new text box and typed in the same content that's in a paragraph of the pasted text. It Fully Justifies perfectly!
So, there seems to be some invisible 'barrier' within the pasted text stopping the Full Justify process from working properly.
Our company uses some third party software to track the number of plots being printed. In AutoCad there is an option to display the full file path of a drawing. I do not see the same setting in Revit. Only the drawing name is sent and recorded which makes it difficult to determine the correct project that should be billed for the plots (our project number is found in the file path).
Can this be enabled in Revit so the full path is sent when a user plots?
I am trying to open an .AI file, and am having almost success. Instead of loading the whole image, it cuts off about 50% of the image, leaving just the center. I altered the rendering width and height in the Import from PostScript window and it successfully extended the image to include the right side, but the left is still truncated. How can I get this whole image to open?
I can resort to just mirroring the left and right sides to fill in the blanks, but I would really rather not do that if it is possible.
I am running Windows 7 64-bit, with Gimp ver 2.6.11
Is there a way to make sure whenever I x-ref a file it is not saved as "full path"? I prefer that be the default as I never x-ref outside of the folder I am working in.
View 1 Replies View RelatedWhen I choose Open Drawing and the window pops up, it would be nice if the full path name of the file showed up on the bar where it shows the file name (see attachment). As it is I can't tell if this file is on my c drive or my back-up drive.
The individual drawings show the full path name once they're open, can the same be achieved with the Open Drawing window?
I'm a new user to Xara and to graphics program in general. I'm using Xara Photo & Graphic Designer 2013 and wish to convert a JPEG image (my company logo) so that it's a PNG file with full transparency. how (or if) I can do this.
View 9 Replies View RelatedI am new at using Adobe Illustrator and I am having a problem when I try and open an AutoCAD file (.dwg).
The file does not open to the right size, full scale. And some of the radius do not open as radius but as angles.
Is there a way to view the file name of a photo when using full screen mode in Lighroom? I am using version 5.3.
View 7 Replies View RelatedThe AutoCAD LT 2012 crashes when I try to copy certain features to different locations. The size of the drawing file is about 3.2 MB. The error message reads as below
FATA ERROR: Cannot write to undo file (probably disk full).
Error: Unhandled Exception
There were some messages posted earlier in regard to this error. Most suggested cleaning temp directory, having more RAM, more graphics memory, etc. I have done everything but I could not overcome this problem. My system specifications are
16GB RAM, Windows 7 (64-bit), More than 100GB free disk space, NVIDIA GEforce GT-120 (512 MB).
I am doing a rendering of a timeline with approx 1900 frames. I am using mental ray as my render engine. After the rendering runs its course, approx 20 hours, it completes with no problems. I open the saved avi file and the clip only captures the first say half of the rendered frames. I have done this 3 times now and for what should be approx a 60 sec clip i only get 36 sec.
View 4 Replies View RelatedWhy I cannot remove the ISO b1 full bleed from this plot config file?
I never print metric so there is no need to for it.
I've a problem to open an old X4-Coreldraw file. The first time I can open it - when I want to save this file CDraw says that the file will be changed to the X6 Version. I say OK and save the file. The 2nd time I'll try to open the X6 file again then the Error occurs! I changed my settings in CDraw to a local dir c: emp, also to a new drive - but nothing happens! All the drives have mor than 400 GB free space! I hope this will be enough.
View 14 Replies View RelatedWhat the heck? Brand new machine and new autocad 2012 MEP install.
View 9 Replies View RelatedI am using Civil 3D 2011, and the last 2 days I have been running into this issue. I tried google, and the most recent item google brought up was from May 2011, so I am coming here.
I am trying to import a tab from another drawing, and it does not matter which tab or what drawing, I am getting this issue.
In CorelDraw X5, I consistently at times receive an error message stating "File Copy Error. TEMP Drive or Output Drive may be full". My temp drives have all been emptied. How to overcome this error message?
View 1 Replies View Related