Lightroom :: How To Display And Use Full RAW File

Nov 30, 2012

my camera (Canon S95) has a sensor with 4:3 aspect ratio and thus saves all RAW files in this format. Additionally, the camera can automatically create JPGs with a cropped ratio (e.g. 3:2 or 16:9). This is very useful because you can see the target format already on the camera screen (with black bars on top and bottom), which facilitates the composition. However, when processing the photos on the big screen afterwards, it often also facilitates the photo to adjust the ratio a little bit and therefore use the additional information saved in the bigger 4:3 RAW file. This works very well with many of the freely available software tools.
 
The problem found in Lightroom is now that it only shows the RAW photo in the cropped format and up to know I have found no way to display or use the full RAW format. So my question is: Which settings do I have to change to use the full format? What do I need to change?

View 12 Replies


ADVERTISEMENT

AutoCAD Inventor :: Set To Display Full File Path For Current File Open

Oct 3, 2012

I was wondering if there was an option to set Inventor to display the full file path for the current file open ? At present I am only seeing a short description of the name of the active file - I wish to see it's full file path similar to what AutoCAD displays.

Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)

View 3 Replies View Related

Photoshop Elements :: Display Button That Loads Full File For Viewing (not Enlarged Thumbnail)

Dec 6, 2013

Just downloaded Elements 12 (and uninstalled Elements 7), so just starting to figure it out. Main interface is a bit different. Got 2 issues:

Where is the 'Display' button that loads the full file for viewing (not an enlarged thumbnail)? Used to be at top right in version 7.

When I try to run a slide show the program shuts down; pretty serious issue.

View 7 Replies View Related

Lightroom :: View File Name Of A Photo In Full Screen Mode?

Jan 25, 2014

Is there a way to view the file name of a photo when using full screen mode in Lighroom? I am using version 5.3.

View 7 Replies View Related

AutoCAD 2013 :: Display The Full Path In The Title Error?

May 9, 2012

I like to have the path display in the title bar at the top of the screen. I check the box to display it in options. It works! But the text is almost illegible in the title bar. The title bar is black, the text is black with some cloudy grey background. It is impossible to read. I can't seem to find anyplace to change it's appearance either.

View 4 Replies View Related

AutoCad :: How To Display Full Drawing Path In Window Header

Feb 5, 2013

A co-worker asked how to display the full drawing path in the window header. He said that it used to, now doesn't. I have never seen the full path of the drawing in the header before. Mine just says "AutoCAD Civil 3D 2013 (Drawing File Name) [Project Folder]"

I checked in Options, but didn't see anything.

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Display In Full Screen Preview Page Only?

Mar 11, 2012

Is there a way to display in full screen preview page only, meaning nothing outside page borders, no bleed or objects around page just.

View 13 Replies View Related

Photoshop Elements :: Not Display Photos In Organizer In Full Screen Mode

Dec 17, 2013

Photoshop Elements 12 will not display photos in Organizer in full screen mode. I've uninstalled and reinstalled the application but it still doesn't work.

View 1 Replies View Related

Illustrator Scripting :: Adding File Name And File Full Path To A Page

Mar 28, 2012

I'm new to scripting What I want to do and don't know how to go about it is to run a script that collects the saved file name and the full path where the file is saved on the network and displays it on my document.

View 2 Replies View Related

Photoshop :: Anyway To Force See Full File Name?

Mar 28, 2008

I work with full screen mode, and the only place I see the file name is in the history palette and it's usually cut off. anything I can do without having to go to standard screen mode.

View 5 Replies View Related

Photoshop Elements :: Can't See Full Screen When In Full Edit Mode On MacBook Pro?

Feb 20, 2013

I can't figure out how to adjust the size of the program screen when in Full Edit Mode.  I can see portions of the Quick Fix menu and none of the Guided Fix menu.  There seems to be no way to resize the window. 

View 5 Replies View Related

VideoStudio :: Full HD Rendered File - Reediting

Oct 26, 2011

I want to re-edit -remove some parts, adding a title- a fullhd VSX3 rendered file which looks and plays perfect. I never have problems with VSX2/3 even when re-editing. This time, it first takes seconds before it opens in the preview window when I click the library tumbnail. It freezes (with created or without smart proxi) for several seconds when I try to cut, or whatever on the timeline.

It only gets somewhat better when de-selecting "audio while scrubbing", but remains still much more "freezy" than all my other (rendered) files. It's a ~2.5 Gb AVCHD file rendered at 18Mb/s VBR in VS. The only thing what is different is that it contains (pre-converted to AVXHD) SD parts from a JVC camcorder (.mod), but it all plays back flawlesly in several HW and SW players.

View 3 Replies View Related

Photoshop :: Opening New File Full Screen Cs4

Jan 17, 2009

I am working under Windos XP pro with Radeon X1950 pro and two screens 22"

My two problems :

1 - Opening a New file:

When I open a new file, I cannot obtain a full screen image as I did in previous versions of PS. May be because I use centimeters dimensions?

2 - In the "work space " (Is it right in english ?)

When I choice "affichage" and then full screen for work space, the image I get is much larger but not entirely full screen..

View 3 Replies View Related

Illustrator :: Why Does File Open Full Screen

Jan 23, 2013

When I open an Illustrator document it opens full screen - meaning the top left corner of the document is at the very top left of my screen, (behind my tools) - and the bottom right is at the very bottom right of my screen (and behind my palettes).Is there a preference setting so that a file would open in the middle of my screen - NOT full screen?

View 11 Replies View Related

Illustrator :: AI File To Be Full Plotted And Locked

Nov 18, 2013

I am new on illustrator. My boss asked me the .ai file to be full plotted and locked. What does this mean and how can I do this?

View 5 Replies View Related

Photoshop :: Can't Save File Because Disk Is Full - Error?

Jan 22, 2013

Everytime I try to save a file in PS it tells me I can't because the disk is full.I have to save it to the desktop and then cut/paste it into the folder I want.So annoying and time consuming! been doing this for months. How can I correct this?

View 12 Replies View Related

CorelDRAW X4 :: Cannot Full Justify Text Pasted From PDF File

Dec 13, 2013

I'm transferring a 1st draft book from a PDF file by copying and pasting text and photos. So far, so good.

During the pasting process, I've selected to maintain fonts and formatting. Despite this, the text gets pasted with only some of the formatting and some correct fonts. But that's easily fixable.

All the text, now in X4, is Left Justified. The author has requested that it be Full Justified (looks better). When I select a paragraph and Full Justify it, the words/lines shrink further to the left. Altering the Spacing from the default 60% to 100% allows it move to the right, but not all the way to the right of the text box.

I've tried hyphenation. Still, there's a limit to how far right the text is allowed to go.Force Justify stretches it all out fine, but the spaces are too big between the words.

I made a new text box and typed in the same content that's in a paragraph of the pasted text. It Fully Justifies perfectly!

So, there seems to be some invisible 'barrier' within the pasted text stopping the Full Justify process from working properly.

View 11 Replies View Related

Revit :: Full File Path For Tracking Plots?

Aug 26, 2011

Our company uses some third party software to track the number of plots being printed.  In AutoCad there is an option to display the full file path of a drawing.  I do not see the same setting in Revit.  Only the drawing name is sent and recorded which makes it difficult to determine the correct project that should be billed for the plots (our project number is found in the file path).
 
Can this be enabled in Revit so the full path is sent when a user plots?

View 2 Replies View Related

GIMP :: Open AI File Not Loading Full Image

Apr 5, 2012

I am trying to open an .AI file, and am having almost success. Instead of loading the whole image, it cuts off about 50% of the image, leaving just the center. I altered the rendering width and height in the Import from PostScript window and it successfully extended the image to include the right side, but the left is still truncated. How can I get this whole image to open?

I can resort to just mirroring the left and right sides to fill in the blanks, but I would really rather not do that if it is possible.

I am running Windows 7 64-bit, with Gimp ver 2.6.11

View 2 Replies View Related

AutoCad :: XRef File Not Saved As Full Path?

May 11, 2012

Is there a way to make sure whenever I x-ref a file it is not saved as "full path"? I prefer that be the default as I never x-ref outside of the folder I am working in.

View 1 Replies View Related

AutoCAD LT :: Full File Path Name For Open Drawing Windows

Apr 1, 2013

When I choose Open Drawing and the window pops up, it would be nice if the full path name of the file showed up on the bar where it shows the file name (see attachment). As it is I can't tell if this file is on my c drive or my back-up drive.

The individual drawings show the full path name once they're open, can the same be achieved with the Open Drawing window?

View 1 Replies View Related

Xara :: How To Convert JPEG Image To PNG File With Full Transparency

Apr 17, 2013

I'm a new user to Xara and to graphics program in general. I'm using Xara Photo & Graphic Designer 2013 and wish to convert a JPEG image (my company logo) so that it's a PNG file with full transparency. how (or if) I can do this.

View 9 Replies View Related

Illustrator :: AutoCAD File (DWG) Not Opening Right Size / Full Scale

Jan 30, 2013

I am new at using Adobe Illustrator and I am having a problem when I try and open an AutoCAD file (.dwg).
 
The file does not open to the right size, full scale.  And some of the radius do not open as radius but as angles.

View 4 Replies View Related

Lightroom :: How To Get Full Frame Image In LR

May 21, 2013

I have just started to use a Canon 5DMkIII and have used the camera crop feature set to 4:5 thinking that this is just for viewing purposes during composition of the image in the camera. When I came to import my RAW files into LR4, I realise that the images are already cropped and all I can see is the image between the guide lines in the camera. The camera, however still shows the whole image and so I assume that all the data was captured.

How to get the full frame image in LR?

View 6 Replies View Related

Lightroom :: 5 Beta - Before / After In Full Screen?

May 23, 2013

When I press F for Full Screen and then the fwd. slash to see before/after nothing happens. Is this normal, if so it would be nice to see before and after in full screen.
 
I'm trying this in LR5 beta.

View 1 Replies View Related

Lightroom :: V3 Opening Full Screen Only

Jul 20, 2012

How do I get lightroom 3 to open and be able to see the red, yellow and green buttons on top left?

View 2 Replies View Related

Photoshop :: How To See Document File Name With Full Path When Hovering Mouse Over Title Bar

Apr 1, 2013

Using PS CS6, Windows 7 x64.
 
I was under the impression that when hovering my mouse over the document title bar, I would see a tooltip showing the full file name, including the path.  This isn't happening and I'm wondering if there is a way to do this.  I know I can click File > Save As, or Ctrl+Shift-S to see the full path, but hovering over the title bar would be easier.  (What I am seeing now in the tool tip is the file name, % magnification and which layer I have selected.  Basically, the tool tip is just showing what's in the title bar without hovering.)

View 26 Replies View Related

AutoCAD LT :: Fatal Error / Cannot Write To Undo File (probably Disk Full)

Sep 6, 2012

The AutoCAD LT 2012 crashes when I try to copy certain features  to different locations. The size of the drawing file is about 3.2 MB. The error message reads as below

FATA ERROR: Cannot write to undo file (probably disk full).

Error: Unhandled Exception

There were some messages posted earlier in regard to this error. Most suggested cleaning temp directory, having more RAM, more graphics memory, etc. I have done everything but I could not overcome this problem. My system specifications are

16GB RAM, Windows 7 (64-bit), More than 100GB free disk space, NVIDIA GEforce GT-120 (512 MB).

View 5 Replies View Related

3ds Max Animation :: Finished AVI File Is Not Capturing Full Range Of Rendered Frames

Mar 18, 2011

I am doing a rendering of a timeline with approx 1900 frames. I am using mental ray as my render engine. After the rendering runs its course, approx 20 hours, it completes with no problems. I open the saved avi file and the clip only captures the first say half of the rendered frames. I have done this 3 times now and for what should be approx a 60 sec clip i only get 36 sec.

View 4 Replies View Related

AutoCAD 2010 :: Can't Remove ISO B1 Full Bleed From Plot Config File?

Jan 9, 2013

Why I cannot remove the ISO b1 full bleed from this plot config file?

I never print metric so there is no need to for it.

View 2 Replies View Related

Lightroom :: 5 - How To View Module Full Screen

Mar 27, 2014

How am I able to view the LR5 module full screen?  It only covers 2/3 of the screen.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved