Paint Shop Pro :: Border With A White Edge
Jun 2, 2013
Using Paint shop 'pro' ( apparently ) X4
ALL I want to do is..
place a photo on a page and then give it a border..a 'transparent' border - aka..perhaps a softened edge / or one which looks like its 'merged' into the background. Im doing a dvd cover so ideally not wanting a ''photo simply stuck on page' look. A more subtle effect.
Easy enough ( with previous versions..Photoimpact 11 per say ) ..click on border..select a fancy design and hey-ho it appears...the effect of a photo with a blended feel into the background.
NOW - all i've managed to do on this program is, SELECT IMAGE>PICTURE FRAME> ( a choice appears) once click on..say..EDGE FUN 03..the effect ( of some flowers ) does appear..but alone with it a massive great white border...shrinking the image etc...ALL I WANT TO DO IS TO TURN THAT MASSIVE WHITE BORDER INTO..SAY.. ANOTHER COLOR. or perhaps just blend it into my original background.
I have set my original layer to ..transparent.. ( i think )...but have colored this purple.
( How the heck do you get the right-hand categories to appear in my main editing page. Having to go to EFFECTS>EFFECT EDGES..or whatever...to show a small thumbnail of an effect isnt great..much perfected Photo impact when you ran your mouse along the effects and by and large the effect changed on your original large image so you can see what the effect was better. )
View 6 Replies
ADVERTISEMENT
Jun 19, 2012
It was all about 64bit-32bit versions.
I've installed 32-bit CS6 and now everything works perfect.No white lines after applying/resizng anything.
View 4 Replies
View Related
Jul 20, 2012
I have some small rectangular drawing of different sizes (about 3" x 4" or 5" at 200 pixels/inch).
I want to place a simple solid black line border around the edge of the canvas. These drawings have a white background.I do not want white showing past the outside edge of the border.I want the border to show with an even smooth width on all four edges of the drawing.I want to specify the color and the width of this border. Here is what I have unsuccessfully tried: Using the Rectangle or the Line tool on a layer assigned for the border is a hit and mostly miss proposition.
For the Rectangle tool, once the rectangle is placed on this layer, I do not know how the adjust this rectangle. I erase the rectangle and try again. Sometime what I see is okay, but most of the time what I see is irregular and poorly positioned. For the Line tool the lines drawn often show as a stepped line, not a single width line. I do not know how to not have these steps occur, and I of course do not want curved lines. Can you instruct me about how I can create a simple solid black line border around the edge of the canvas?
View 3 Replies
View Related
Jun 27, 2011
I have PSPX2 and when I select (shape selection tool) the ELLLIPSE to use on the photo, what must I do to get a border around the ellipse. I also would like to choose a border color and thickness for the border.
View 9 Replies
View Related
May 10, 2013
When I remove the background of an image theres always this white border thats on it. Ive filled background in another colour and cropped the image but the white border is always there. How do i remove this?
View 6 Replies
View Related
Jun 26, 2012
I'm inserting an image onto a background, but the background is the same color as certain parts of the image. I was wondering how to make a white border around the image so you can tell them apart (the background is black).
View 2 Replies
View Related
Aug 10, 2011
The white border only shows up when i color in a part of the picture, not when its all white and black. I've tried the feather tool but it didn't work. It never happened before when i made my other pictures, it just randomly started!
View 1 Replies
View Related
Apr 14, 2013
I'm, trying to make an animated gif from a png image. I managed to do it, but there's a small problem... when I convert the png to gif (to make the animated gif afterwards) the image gets a strange white border around the edges. I tried to play with the Dithering and Tansparency threshold, but to no avail.
[URL]
How can I avoid this with Paint.NET?
View 9 Replies
View Related
Oct 20, 2012
After screen capturing an image, when viewed in the PSPro X workspace, a thin white border shows on the right side and at the bottom.This shows what ever is captured, it wont clone brush or crop out.I have to apply a border to disguise it.
View 14 Replies
View Related
Feb 9, 2012
What is the easiest way to add a border around the ellipse of an image like this?
Ideally the border would be better 'outside'. Once I have a method, I could of course make the border a bit fancier by adding another thinner one outside it.
I use PSP8, but reckon I could adapt methods suggested for later versions.
View 13 Replies
View Related
Feb 10, 2012
I've been having an issue with the paint bucket tool; when I fill in an area with the tool it leaves a thin white border between the area and any lines drawn with the paintbrush tool.
(see attachment) how this can be remedied? Since I'm working on a comic and going back over every line filling in the color takes far too much time.
View 1 Replies
View Related
Jun 24, 2011
It is possible extract foreground from image if I have: 1) exact image of foreground and 2) exact image - foreground + object on it ---> so that I can get object which has fine--aliased borders?
I want exact object - so I do not want use Background Eraser, it is possible somehow mathematically?
View 7 Replies
View Related
Oct 4, 2013
I reset preferences using the shift key and the instructions on the cited web site. neither worked I also restarted the computer. If I open paint shop X5 the paper edges can be seen behind the image but if you look at the enclosed screen print you can see paper edges are not visible in paint shop pro X6.
View 4 Replies
View Related
Jun 15, 2011
I used the suggestions on removing the white background and was successfull - how can I remove the white edge on my image?
View 1 Replies
View Related
Nov 11, 2012
I have some black and white photos from my wedding and I want to add some colour to them. It looks like it will be too much effort to recolour the whole photo so I might settle for just colouring the waistcoats for a splash effect.
I have read lots of tutorials for Paint.NET and for GIMP [URL] Essentially I do the following:
Add a new layer
Use lasso to select the waistcoat
Use bucket fill with the purple colour
Select multiply for the layer.
This gives me the result I am looking for, but only in the region that I have selected.
Not surprising really, but something that I can't get right and that seems to be skipped over in all the tutorials is: how do I select the area correctly?
Unless I go down to a really high zoom and spend ages with the selection, I end up either not selecting everything or I end up with leakage into other parts of the clothes.
This tutorial [URL] for a paid for product seems to let you just roughly choose your selection then it uses some algorithm for edge detection to make the correct selection.
Is there anything in Paint.Net to choose the selection like this? I have tried the magic wand, but the since the picture is greyscale, it chooses random selections all over the image instead of just the waistcoat.
View 1 Replies
View Related
Feb 2, 2011
I'm trying to make the attached icons have a transparent background. Tried just selecting the white space but this causes the edges to look awful on dark backgrounds.
I've also tried the Grim Color Reaper but cannot find a setting that keeps the icon as it is, only making the edge semi transparent.
View 4 Replies
View Related
Nov 13, 2013
Always when i cut a photo in Corel X3, save it and look to it in a other photo program, Then i have on the left side and the bottom side a white line of 1 pixel.
When i cut a photo from (for example) 1200x1600 and cut a piece from it (for example) 500x500 and i save it, i must always again cut the white line and again make it tot 500x500 pixels.
View 3 Replies
View Related
Jan 24, 2012
I'm having a problem printing out a black and white photo. This is the first time I'm tring to print from PSP 3. When the photo is printed out, instead of looking like what I did in PSP 3, it looks like it was imbossed and black pencil. I have done a search and played around with PSP 3 with no luck..Even reinstalled PSP 3. If I go to the photo file, both the saved and the original, and print it directly, they comes out near perfect, except for a purple tint in both. You do not see the purple tint in the photo when in PSP 3 or the saved file untill it is priinted out.
JPG
102 KB
773x1000 pixels original size
72 dpi 8 bit depth
Resolution 2
EXIF 0220
Off the internet
Canon PM 620 printer
Kodak paper
No error codes
PSP 13.00
View 2 Replies
View Related
Dec 9, 2012
I use a Pentax K-r and the white balance icon above the EXIF data panel only shows if I have used Auto White Balance. If I have used any of the other modes available in the camera, no icon is shown and the EXIF data lists the shot as taken with manual white balance. The other two icons (metering mode and JPG/DNG) work correctly. The white balance issue means that I have to note the white balance setting of each shot while the card is in the camera and put it by hand against the shot in PaintShop Pro. This is very time-consuming and seems to be a serious omission.
I have since found that the white balance icon works with my Panasonic Lumix DMC FZ-150 camera, although the EXIF data still shows the shots as taken with manual white balance, so it seems to be a compatibility problem that needs to be resolved.
View 1 Replies
View Related
May 14, 2012
I'm having trouble changing a black and white map to filling it with a color. In the materials palette the foreground and background remain in the greys/blacks and will not accept the change to a color.
View 1 Replies
View Related
Jun 28, 2011
Tried a search in the help file in Paint Shop Pro X3, but could not come up with anything. Is that an option/tool it has?
View 3 Replies
View Related
Dec 12, 2012
how to fade to transparency by myself I am left with a residue problem when saving to a different file format.
I took my square image and pasted as a layer. Behind this is a raster layer flood filled with black (As the image will be going onto a black t-shirt). I used a rounded rectangle selection tool to make a mask somewhere just inside the image borders. I then applied a Gaussian blur to the mask and it faded the edges of the image beautifully. I checked with the black background layer off and again it faded nicely into transparency.
Now my issue is that when I save it as a PNG file (with background set to transparency of course) and try to use it against various coloured backgrounds there seems to be a white glow around the edges where it is meant to fade out.
View 5 Replies
View Related
Sep 25, 2011
I have checked my settings from PSPx3 with PSPx4 and everything seems the same when using the paintbrush tool but yet every time no matter the hardness level of the brush i end up with a white border on my texture .. NOT visible inside the program itself but becomes visible once I apply the texture to avatar.
View 4 Replies
View Related
Nov 14, 2011
How to create a photo that has a specific area of a photo containing the original color and the rest of the photo be black and white. I am using Corel Paitshop Pro X4 Ultimate.
View 3 Replies
View Related
Jun 18, 2013
I started with a tif image that's a black & white drawing and used the fill tool to fill in some black areas that were supposed to be solid, but weren't. I also did a lot of cutting to get rid of specks on the image. It looked fine when I closed and saved it, but when I went to convert it to a PDF, all my tif's have a black background and white lettering--should be just the opposite. I have gone into the images and they all look that way (apart from the PDF). I'm guessing this is a layer issue, but I'm new to this program and can't figure out what I did wrong and how to fix it. I really don't want to start over. So, to restate, everything that should be black is white and all that should be white is black.
View 2 Replies
View Related
Jul 17, 2013
I want to print an image on a DVD with a white printable surface in PSPro x.I want to be able to gradually feather the white edge given to the image (what is the best way to do this) so that it blends into the white background of the disc and therefore the square edges of the image do not show.
View 11 Replies
View Related
Jun 23, 2012
How can I change the color of the background in an image from white to transparent?
I am using PSP v7.04
View 2 Replies
View Related
Apr 8, 2013
I am creating an image, mostly text and color. I want to create words with letters that have been turned cw and ccw, alternating. After that, I plan to flood fill the words. Unfortunately, I get some white inside where I flood filled.
View 14 Replies
View Related
Sep 14, 2012
I am trying to save a red and white and black logo to an eps file to use with a vinyl cutter but when it saves it changes it to a greyscale picture and the red color is removed. I tried resetting to factory settings and that didn't work.
View 2 Replies
View Related
Nov 13, 2011
I didn't realized that as I'm importing images, the 'background' was defaulting to white. I'm working a couple images right now, in which the transparent setting is really needed. I found where to change the default, but not how to change it for existing images in PS already.
View 2 Replies
View Related
Nov 7, 2013
I would like to get some variety of photos looking like they were taken during the civil war era. This would include white specks, black splotches, blurred edges, irregular black edges, etc. I have looked for ways in which to accomplish this and have not been successful at this.
Currently, I am using the following to varying degrees: Sepia Toning/Black and White, Blur, Salt and Pepper noise, and Vignette.
I have PSP 5
View 4 Replies
View Related
