Paint Shop Pro :: Amount Of Memory Useable / Visible
Nov 10, 2011I would like to know if PSP X4 would take advantage of having more than 4 GB of RAM on 64 bits systems.
View 2 Replies
ADVERTISEMENT
Paint Shop Pro :: Not Enough Memory In Pro X3
Oct 13, 2013During preparing a collage, when I try to save the project, I receive the the message that I don't have enough memory.I am using windows 7 and as far as I know, I don't have memory problems. I am working a lot with VideoStudio x4 without any problems.
View 5 Replies View RelatedPaint Shop Pro :: Cannot Copy File From HD To Memory Card
Oct 19, 2013have been using PSP8 for a long time with no problems. i regularly copy files from my HD to a memory card but recently i have been getting the following error message for no apparent reason:
cannot copy [filename]: the directory or file cannot be created
if i try to copy a batch of files this does not happen for all files - just more recent ones. so half the files get copied, the others don't. i have checked file properties old files vs new and cannot see any difference. my memory card is not full.
Paint Shop Pro :: X3 - Palettes Not Visible?
Nov 1, 2010I have tried everything that I know to do but cannot get the materials palette (and some others) to show in X3. I need to have the materials palette show so that, among other matters, I can change the color of text I add to the image. I did not have this issue with X2 and this issue is forcing me to go back to that older version.
View 8 Replies View RelatedPaint Shop Pro :: Kodak ESP 3250 - Scanner Import - Not Enough Memory?
Dec 31, 2011I am trying to scan from a Kodak ESP 3250 All in One, into X4 on a Toshiba Satellite with 4GB memory and a 120GB SSD with 80GB free.
No matter how small an image area I try to scan, colour, grey-scale or BW, or how low I set the resolution, I get the message that there is not enough memory, and to close some documents, even when there are none open.
I can scan from the ESP 3250 into other installed programs OK.
I have Windows 7 Home Premium with all updates installed.
Paint Shop Pro :: X6 Perfectly Clear Plugin Short Of Memory
Sep 5, 2013I just installed PSP X6 Ultimate 32 bit and the Perfectly Clear Plugin. It works really well part of the time but will often crash saying that Photoshop is not allowing enough memory. I'm using Windows 7 with more than 3 gb of memory. I also have Aftershot Pro running.
View 4 Replies View RelatedPaint Shop Pro :: X6 - Filename No Longer Visible Below The Thumbnail?
Oct 9, 2013In PSP X5 I got the file names below each thumbnail but in PSP X6 I do not see the file name below the thumbnails. Is there a setting to get the file names or is it again a "new and extra ordinary function" which takes of the file names? I cannot work without the file names.
View 4 Replies View RelatedPaint Shop Pro :: Paper Border Not Visible In Page Layout X6
Oct 4, 2013I reset preferences using the shift key and the instructions on the cited web site. neither worked I also restarted the computer. If I open paint shop X5 the paper edges can be seen behind the image but if you look at the enclosed screen print you can see paper edges are not visible in paint shop pro X6.
View 4 Replies View RelatedPaint Shop Pro :: How To Create Visible Watermark To Apply To Pictures
Jun 3, 2012I am trying to create a visible watermark to apply to pictures. How to create one to use in Paintshop Pro X4 Ultimate? I know how to apply one but I'm uncertain on how to make the actual watermark.
View 5 Replies View RelatedPaint Shop Pro :: Layer Stack Containing Merged Representation Of All Visible Layers
Dec 19, 2011In Photoshop, there is a shortcut that does the following:
Ctrl + Alt + Shift + E — You’ll get a new layer at the top of the layer stack containing a merged representation of all visible layers (handy for sharpening adjustments, etc.).
I tried this in PSP X3 and it doesn't work. Does it even possible to do this in PSP? I know how to merge all the layers in PSP but all the merged layers then disappear. The Photoshop feature keeps all the visible layers and merges them into a combined merged visible layer.
Paint Shop Pro :: Script / Copy And Merge Visible Layers Into A New Layer
Mar 11, 2013If you've ever created an image having multiple assorted layers, and want to apply a modification to the final image while keeping those original layers intact, here's the script to do that:
Select allfrom PSPApp import *
def ScriptProperties():
return {
'Author': u'Ken Arway',
'Copyright': u'2013',
'Description': u'Copies all visible layers to a newly created ra'
u'ster layer.',
[code]....
Just use your favourite text editor to copy that code into a text file, and save the file as "CopyVisibleMergedToNewLayer.pspscript" in your user scripts directory. Doesn't matter if it's the "Restricted" or "Trusted" directory.
As the name implies, all the visible layers will be copied and merged, so it's easy to first "hide" the layers you don't want merged before running the script.
Yes, it's just a series of recorded actions; but the key is its use of the "Select All" and "Paste Into Selection" actions -- that ensures that the resulting merged layer maintains the same positioning as the individual layers. In other words, if your original layers have a transparent background and opaque areas that are off-center, simply using Edit...Paste As New Layer will center those opaque areas in the canvas, which is not what you want....
Paint Shop Pro :: In Print Preview Only Tiny Parts Of Picture Is Visible
Jun 25, 2011when i resize an image for example to 27 x 18 cm there is no problem however, when i try and print the image and the preview window comes up there seems to only be a tiny part of the picture visible? its basicly a tiny square in the top left corner of the preview page and its just big enough to see its a minute part of the image i want to print. If i try and print the image anyway i just get "could not start print job".I never had any issues before then suddenly a few weeks ago the problem happened in version x2 on any pictures i tried to resize and print , so i updated to x3 in the hope it would correct the error but its still there. Any setting somewhere , i tried using a trial version of a rival program and that worked fine and showed the print preview exactly how it should.
View 1 Replies View RelatedPaint.NET :: Change The Amount Of Pixels?
Jan 21, 2013I need to make a texture for google SketchUp that can be imported into RCT3. But the amount of pixels need to ve a square. Eg 256 x 256. How do I do this?
View 1 Replies View RelatedPaint.NET :: Any Way To Shift Pixels By A Specified Amount?
Dec 19, 2011Often, especially when I'm working with screenshots, I'd like to be able to set the canvas size, and then paste in a larger image and move it to a specific point. This would allow me to automatically cut out the Windows portion of the screenshot, menu bars, scroll bars, whatever, while still keeping the actually interesting pixels in the same place from screenshot to screenshot.
In the past, what I've done is essentially to create a selection mask:
Prep:
Paste the image into the backgroundCreate a 2nd layerSelect over the interesting pixels on the image in the 2nd layerInvert the selection in the 2nd layer and fill it with a solid colorRepeat:
Make a magic wand selection of the un-colored pixels in the 2nd layerSwitch to the background and copy the selection to the clipboardWork with the copied pixels (in another Paint.Net window, or another program)
Paste the next image into the backgroundSwitch to the 2nd layerBecause of the manner in which Paint.Net handles the canvas, this workflow would be greatly simplified if I could programmatically move pixels:
Prep:
Select the interesting pixels in the first imageCrop to SelectionRepeat:
Work with the pixels remaining on the canvasPaste the next image (select "Keep Canvas Size")Shift Pixels so that the interesting portion of the image is on the canvasI looked through the entire menu structure in 3.5.10 several times, and didn't see anything that would obviously produce this transformation. I'm aware of the Ctrl+<arrow> method for moving by 10px, which is certainly better than just using the arrow keys. And I've seen references to the Panelling effect plugin which performs a similar function, but (without having tried it) I expect it would not produce the desired effect if I wanted to create negative/empty space on one or two sides of the shifted pixels, or if one of my images was smaller than the total desired area.
Is this already available in Paint.Net, and I just missed it? Or is there a plugin that accomplishes this specific transformation without additional side effects?
Paint.NET :: Make Wallpaper With Huge Amount Of Small Pics?
Jun 8, 2011Just made this wallpaper, original size was 1440*900 Every avatar inside that pic are individual image file and I input them by Add layer > Import from a file, one by one = =''
Question is, how to make the job easier?
Like some plugin which allow you to select multiple image files and sorted it by some pattern...Does it exist?
AutoCAD 2013 :: PDF Underlay Is Un-useable
Aug 19, 2013After loading a single 24x36 road plan and profile PDF drawing as an underlay, Autocad is so slow and jerky I couldn't work with it. The PDF file size is about 1 MB. I need to load at least 10 more, so it is a hopeless endeavor to use the PDFs. I'll have to convert them another format such as to JPG to get the job done.
How to use this functionality, but if the performance isn't greatly improved it might as well not even be included in the product.
AutoCAD Dynamic Blocks :: With Useable Multileaders
Jun 1, 2011I am adding some complex details to my block library, and I want to include about 20 different multileaders in each block so that I have immediate and consistent access to the annotations. I may use an individual block many timess in a drawing, but each instance of the block may only require me to use 4 or 5 of the multileaders. I also want to be able to manipulate the multileaders in the same way as I do any regular multileader (change their position and location, landing length, align, etc) and even align and position them with other multileaders that are not part of the block.
How do I create or use a block in this way? I essentially want to create a dynamic block of some sort, but I don't really know where to start. Am I trying to do the impossible? Would it be easier to just create a visibility parameter to keep the mleaders hidden, go into the block editor at every instance of the block, copy the mleaders I want to use, and paste them into the drawing?
Photoshop :: Useable Picture From Color Kodak Negatives?
Jan 2, 2003creating a useable photo from a color negative? The Film is Kodak 200. I've downloaded a few different curves for inverting the film.
View 4 Replies View RelatedAutoDesk Smoke :: Thumbnail In The Media Library Are Not Useable?
Feb 2, 2013The Thumbnail in the media library are not useable. They need to be larger. I know the desktop is also an option, but for quick scanning, they don't serve there purpose.
View 3 Replies View RelatedPaint Shop Pro :: Exporting Frames From Animation Shop
Dec 24, 2011Just came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies View RelatedCorel PHOTO-PAINT X6 :: Memory Cache Levels
Aug 9, 2012In Tools / Options / General there is a selection for memory cache (1-4). I've looked in the Help but get "no results".
View 6 Replies View RelatedCorel PHOTO-PAINT X5 :: Not Enough Memory Exporting To Photozoom Pro 2
Feb 6, 2012Getting 'Not enough memory" when exporting to Photozoom Pro 2. Using Win7 32bit with 4GB.
View 2 Replies View RelatedPaint Shop Pro :: Will Animation Shop Run On Windows 7 Next To X4?
Oct 28, 2011I installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies View RelatedCorel PHOTO-PAINT X4 :: Open File That Is Frozen - Out Of Memory
Nov 2, 2013I've been working on an image for about 4 hours... (PHOTO PAINT X4) The screen is now frozen with a small box saying ''out of memory'' I haven't saved the file for a few hours. Or has all this work now gone. I now also have this message with no text, what it might be and which button I should press!? Or is there some sort of shortcut to save.
View 7 Replies View RelatedCorelDRAW Graphics Suite X3 :: Saving Files With Big Memory Instead Of Small Memory?
May 6, 2011I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies View RelatedCorelDRAW Graphics Suite X5 :: High Memory Usage And Out Of Memory Error
Nov 4, 2011I do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
Paint.NET :: Copy Visible / Merged
Mar 16, 2012I don't see a "Copy Visible" function, does one exist that does it? Basically I have 10 layers, but I want to copy/paste the 'visible' area to stick in a test harness without having to manually flatten the image first.
View 4 Replies View RelatedPaint.NET :: Line Tool Not Visible?
Jan 27, 2014have just downloaded paint.net - no problem on many basic functions but cannot get the line tool to give me a visible line. I have changed primary and secondary colors to make sure regardless of whether I'm left or right clicking the line will stand out against white background. I have increased width to six pixels to make sure it will be nice and thick and visible. I do get the four little box thingies when I release the cursor, and I can then go in and manipulate them. But no matter what I try I cannot SEE a line.
View 5 Replies View RelatedPaint.NET :: Create New PDN From Selected Visible Layers
Jun 22, 2012Working with many layers 60+ is great, but most of the time we have many that are not selected i.e. visible.sometime 30+ those layers are most of the time not needed anymore or make it too crowd in the layer box, making layer selection and handling messy.
The best way is to remove them from the PDN, while keeping only the visible selected. But removing the "not selected" layers one by one is time consuming and again, accidents happen.
Three solutions .
A simple way to do it, is just add under "edit menu" or the "Layer menu" the following. "Create new PDN from selected visible layers"..
OR
add to the "Save As" the option to "Save selected visible layers only"
OR the long way, that has its good things in it too.
Add the option to INVERT the layers visibility selection, and then the option to remove/delete selected layers. (of coarse add an approval "are you sure box")
This option would even be great for other uses when we need to switch back and forth between many visible layers. for example when making animations etc.
Corel PHOTO-PAINT X5 :: Print Layout Similar To That In Paint Shop Pro?
Sep 25, 2012Is there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies View RelatedPaint Shop Pro :: Paint Brush And Eraser Stopped Working
Apr 9, 2011My program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies View Related