I am trying to create a visible watermark to apply to pictures. How to create one to use in Paintshop Pro X4 Ultimate? I know how to apply one but I'm uncertain on how to make the actual watermark.
View 5 Replies
I am running corel paint-shop photo pro X3,
I was wondering if there is a way to watermark "en masse" meaning i have like 200-300 pictures i need to water mark...
How do you create a watermark in Paintshop pro x3 that you can use over and over for multiple photos? I've read some articles out there but it seems it's just specific to a photo itself, is there a way to create one and which settings should be used so once it gets added to a photo, it's seamless. Do you create a new image? if so, what is the preset, characteristics and so on? Here is one article I've read: [URL] ...
View 5 Replies View RelatedIs there a plugin that will place a watermark on my pictures?
View 1 Replies View RelatedI am trying to find a way to watermark my photos using text for uploading to the net to try and prevent image theft. Canon Zoom Browser adds text but only 1 pic at a time.
I have searched this forum without success and searched the internet without success except for Alamoon which does one pic at a time ok but to do in batches requires you upgrade at a cost of about half the price of upgrading to PSP x5.
I read a comment by a subscriber here dated 2010 referring to PSP x3 but it said that after going to Image->Watermarking->Visible Watermark, you have to load a "pre-made image ..." Where do you get this pre-made image from ? Remember, I only want to add a couple of words of text. Surely this is not beyond the capabilities of Corel? Alamoon does it very easily. It doesn't take numerous windows and dozens of clicks with multiple layers to negotiate etc.
Is it possible to remove a watermark from an image in PSPro X, if so how?
View 2 Replies View RelatedI am using Pro X3 in full editor. When using Presets, if I select a preset such as an arrow from the drop down menu, the drop down menu seems to cover the Apply button. I can place a preset in my image but I cannot find the apply button while working from the Preset sub menu. The object retains the edit frame until I close the image, then I am asked if I want to APPLY before saving.
View 10 Replies View RelatedI have tried everything that I know to do but cannot get the materials palette (and some others) to show in X3. I need to have the materials palette show so that, among other matters, I can change the color of text I add to the image. I did not have this issue with X2 and this issue is forcing me to go back to that older version.
View 8 Replies View RelatedI was reading a tutorial on Photoshop about using a gradient map on a brush (the case in point was of drawing fire, with four colours, black, red yallow and white, making up the gradient map) such that you'd paint just once to get all four colours from each brush stroke. Here is an example. I was wondering how to do that in PSP X3 Ultimate. I am not new to PSP but I never used the more complicated brush features. Scripting doesn't scare me too much, if it comes to that, but I'd prefer a manual approach.
View 2 Replies View RelatedIs there any way to apply brightening along a gradient? Like to compensate for lighting that comes onto a surface from one side, in order to make the surface look more uniformly lit?
View 1 Replies View RelatedAlso, can I add text of different fonts and colors in the same image?
View 1 Replies View RelatedI would like to know if PSP X4 would take advantage of having more than 4 GB of RAM on 64 bits systems.
View 2 Replies View RelatedIn PSP X5 I got the file names below each thumbnail but in PSP X6 I do not see the file name below the thumbnails. Is there a setting to get the file names or is it again a "new and extra ordinary function" which takes of the file names? I cannot work without the file names.
View 4 Replies View RelatedI am looking to create a signature/watermark so that i can add to all my photos, basically just my name to b added at the bottom corner of the photo.
How do i make a signature so it can be saved then added to each individual photo when needed?
I reset preferences using the shift key and the instructions on the cited web site. neither worked I also restarted the computer. If I open paint shop X5 the paper edges can be seen behind the image but if you look at the enclosed screen print you can see paper edges are not visible in paint shop pro X6.
View 4 Replies View RelatedI have PSPx4. If I select an area of the image and try to apply color balance (Adjust|Color balance), the effect gets applied to the entire image, not just the selected area. Is there a way to apply color balance to just a selected region?
View 5 Replies View RelatedIn Photoshop, there is a shortcut that does the following:
Ctrl + Alt + Shift + E — You’ll get a new layer at the top of the layer stack containing a merged representation of all visible layers (handy for sharpening adjustments, etc.).
I tried this in PSP X3 and it doesn't work. Does it even possible to do this in PSP? I know how to merge all the layers in PSP but all the merged layers then disappear. The Photoshop feature keeps all the visible layers and merges them into a combined merged visible layer.
If you've ever created an image having multiple assorted layers, and want to apply a modification to the final image while keeping those original layers intact, here's the script to do that:
Select allfrom PSPApp import *
def ScriptProperties():
return {
'Author': u'Ken Arway',
'Copyright': u'2013',
'Description': u'Copies all visible layers to a newly created ra'
u'ster layer.',
[code]....
Just use your favourite text editor to copy that code into a text file, and save the file as "CopyVisibleMergedToNewLayer.pspscript" in your user scripts directory. Doesn't matter if it's the "Restricted" or "Trusted" directory.
As the name implies, all the visible layers will be copied and merged, so it's easy to first "hide" the layers you don't want merged before running the script.
Yes, it's just a series of recorded actions; but the key is its use of the "Select All" and "Paste Into Selection" actions -- that ensures that the resulting merged layer maintains the same positioning as the individual layers. In other words, if your original layers have a transparent background and opaque areas that are off-center, simply using Edit...Paste As New Layer will center those opaque areas in the canvas, which is not what you want....
when i resize an image for example to 27 x 18 cm there is no problem however, when i try and print the image and the preview window comes up there seems to only be a tiny part of the picture visible? its basicly a tiny square in the top left corner of the preview page and its just big enough to see its a minute part of the image i want to print. If i try and print the image anyway i just get "could not start print job".I never had any issues before then suddenly a few weeks ago the problem happened in version x2 on any pictures i tried to resize and print , so i updated to x3 in the hope it would correct the error but its still there. Any setting somewhere , i tried using a trial version of a rival program and that worked fine and showed the print preview exactly how it should.
View 1 Replies View RelatedWhen I take a picture with the camera rotated to the right the pictures shows up in Windows explore with the picture top on the right. In X2 it also showed with the top on the right. In X3 and X5 the photo is shown with the top on the top, auto-rotated.
When I rotate the picture in X5 or maybe X2 counter clockwise the picture is now shown in Windows Explore correctly, top on top. But when viewed in X5 the picture now appears rotated to the left, the top on the left.
The first job I want to do is work on a series of pictures taken on successive days, and then print them out four to a page to show a consultant. I don't appear to be able to do anything so simple and am astounded.
View 4 Replies View RelatedIs it possible to have more than one picture (preferably 2 or 4 and maximum 6) on a full screen at the same time. So that choosing which picture you want to keep is made easier. Now I increase zoom of thumbnails but this leaves a lot of unused space around them including the different tool bars.
View 2 Replies View RelatedI'm using a trial version of Paint Shop Photo 2010, trying to make a simple slide show with music. I downloaded into my laptop from my desktop, 137 pictures already organized and sorted by me and numbered sequentially (using my old faithful, but antiquated PAINT SHOP PHOTO ALBUM ). However!! When I bring this into PSP2010, all the nicely numbered pictures are scrambled! And I can find no way to do a simple file sort by "Name" (i.e. number). I can sort my File Folders by name!! But that does me no good. PSP2010 leaves me with no choice but to hunt each photo from memory (no file nos. are showing now) and drag it into the tray.
View 3 Replies View RelatedWorking with many layers 60+ is great, but most of the time we have many that are not selected i.e. visible.sometime 30+ those layers are most of the time not needed anymore or make it too crowd in the layer box, making layer selection and handling messy.
The best way is to remove them from the PDN, while keeping only the visible selected. But removing the "not selected" layers one by one is time consuming and again, accidents happen.
Three solutions .
A simple way to do it, is just add under "edit menu" or the "Layer menu" the following. "Create new PDN from selected visible layers"..
OR
add to the "Save As" the option to "Save selected visible layers only"
OR the long way, that has its good things in it too.
Add the option to INVERT the layers visibility selection, and then the option to remove/delete selected layers. (of coarse add an approval "are you sure box")
This option would even be great for other uses when we need to switch back and forth between many visible layers. for example when making animations etc.
I store all my photos in the directories under the public pictures folder, (C:Users Public Pictures) rather than in my pictures folder in my documents. I do this so that all the users on the system can get to the pictures.
I'm having problems getting Paint Shop Pro to recognize the folder correctly. I have added the c:users public pictures folder to the organizer using the Browse More Folders action and it shows up. However, the Smart Collections don't see any of the files in the folders under this dir.
My overall goal here is to be able to use the timeline feature on all my photos at once, so I want to get all of the photos into the All Pictures smart collection.
I am trying to equating images in the best way in a PSPIMAGE Project. My base image (background) has a dimension of 640 x 480.
I inserted two pictures. By original configuration, picture A (200 x 266) is bigger than picture B (145 x 189).
- If I increase size of picture B (to achieve same size of picture A), this picture will loss quality. Isn't it (I'm not completely sure)?
- So, maybe could be best decrease size of picture A (to achieve same size of picture B). But it will "harm" my main "composition" of dimension 640 x 480.
It seems to be simple but I don't know what to do or by where to begin...
I am looking to cut some pictures out with the specific dimensions of 960x350. I am using the cropping tool (free form), but it does not show me what the dimensions are as I drag it across.
Anyway to set a crop to that size and then I can just move it around the picture till I have it just where I want it?
Is there a way in PSPX5 or X6 to rename a picture (or string of pictures) so that I can have a "Constant such as VACATION_" followed by the create date from the EXIF data as YYYY-MM-DD followed by a sequence number?
View 8 Replies View RelatedIs there a way I can *prevent* PSP4 from transferring all my pictures from their present location (Picture It Premium 10) to PSP?
I have them sorted into categories and PSP4 "unsorts" them. If I could transfer the categories/albums, keeping the titles, etc.
As illustrated in attached image, I have several pictures (each one as different layer) in a same PSPIMAGE file. I would like to make “rounded” the border/edge of the all pictures (currently they are squared). How could I proceed with this operation?
View 2 Replies View RelatedQuestion 1. How would I make a cartoon drawing/picture or a drawing/picture with color, Into a drawing with lines only, no color. I use the gray scale option and that works great, but it still has the shading of the drawing/picture, and I want lines only. So is there some what of a easy way to do this?
Question 2. Once having a line drawing if some of the lines are a little shaky or kinda looking to pixel ish, Is there a simple way to smooth these lines out?
