Paint.NET :: Save As Monochrome 1 Bit BMP
May 27, 2013
I need to save images as monochrome 1 bit bmp for technical reasons (not only for optical). At this time I'm digitizing several hundreds of old documents (e.g. from university), which I need to lay away, and save them as PDF. The latter become relatively large and because of this I'd like to save them as 1 bit monochrome bmp before saving them as PDF. To edit every single scanned image in paint.net first, saving them as 8 bit bmp and saving them again as 1 bit bmp in another application (e.g. paint) is quite time-consuming. It would be great if future versions (or a plugin - is there any?) could save bmp's as monochrome 1 bit bmp-files.
View 9 Replies
ADVERTISEMENT
Dec 4, 2013
AND/OR a open tab recovery cache or way to extract the images that get lost during a crash of PDN.
Number two on my list behind your fantastic new layer functionality that I had been dreaming about for three years. I NEVER close PDN. The ONLY time it closes is once every week or two when the 20, 30, 50 tabs that I have open, finally overwhelm my system. I bounce back and forth so much that there is no way to continuously save them as I make changes cause it would jack up my workflow by taking up too much time.
No way around it, this is just how I work. It would be lovely if PDN was able to, similar to After Effects, popup an error box saying it was about to crash and did 'you" want to save the session. Especially, now, with 4, as while it is a super duper version upgrade, the crashes were daily, with me, and I couldn't keep losing that much data. Sophie's choice, for me. The old layer window or daily crashes.
View 6 Replies
View Related
Apr 27, 2010
While "Draw" of Coreldraw X5 is working well, Corel Photopaint X5 does not "Save", "Save as..." or "Export" files. It just does nothing, when I choose to save a file under "something.cpt". It works, as long as it is a JPG, but not as a CPT. I am working on a Win7, with CorelX5 in german. Support told me to reinstall.
View 15 Replies
View Related
Oct 8, 2010
! would assume that something like this has been made but i cant for the life of me find it when shall i find a plugin or default way of doing this i have about 50 layers that need saving as an image each and the idea of doing it by hand scares me.
View 6 Replies
View Related
Apr 29, 2011
Just installed CorelDraw Graphic Suite X5.... version : 15.2.0.661
The "Save" command or "Save as" does not work for me in Photo-paint X5.
The patch does not want to install.
View 15 Replies
View Related
Jul 16, 2006
i have seen this done
but how do you do it?
View 1 Replies
View Related
May 20, 2005
How to I create a monochrome bmp in photoshop ? I have a logo I use for my business that has a white back ground, blue image and red letters. I have a screen saver that is asking for a black and white monochrome bmp.
I am using photoshop cs and only have a photoshop 5 book which isnt telling a whole lot other than checking monochrome under the channel mixer, but it still isnt working correctly so obviously I am doing something wrong.
View 1 Replies
View Related
Mar 12, 2012
I use Autocad 2008LT and want to save the file in .pdf monochrome when I email it to contractors. I can plot in monochrome easily but when I convert .dwg to .pdf and go to properties- graphics->vector graphics monochrome is grayed out in resolution and color depths. A line below says "this device cannot configure some (all) of these values". Is this a limitation of LT?
View 2 Replies
View Related
Mar 14, 2004
way to make a photograph all shades of the same colour - say different shades of red or green (no black).
View 7 Replies
View Related
May 11, 2006
I'm trying to make a photo monochrome, but keep the person with the originial colors (so background is monochrome).
View 3 Replies
View Related
Dec 12, 2006
I'm shooting monochrome images with a Canon Digital Rebel XTI but when I load the images in Bridge or Photoshop CS they are showing up in color rather than black and white. How do I set Camera Raw to show the files properly in B&W?
View 2 Replies
View Related
Mar 18, 2009
I used to use Photoshop to create 1 bit monochrom PCX files, but guess what, I can't remember how I did this, Last time was about a year ago and now I'm completely clueless. Can anyone here point me in the richt direction?
View 1 Replies
View Related
Jan 25, 2007
In Elements 2.0 I would like to change a black and white picture to a monochrome in any color of my choice.
View 2 Replies
View Related
Dec 1, 2010
I just moved from ACAD 2008 to 2010. I for the life of me cannot figure out how to plot my drawings to a monochrome (black and white) drawing/PDF. Every plot comes out as by layer colored plots.
I have tried using Page Setup Manager and created a (or what I thought was a) monochrome .stb file. However, even with the mono.stb file selected the plots still plot in color.Is it possible to configure a .stb file to plot in only black?
View 5 Replies
View Related
Apr 3, 2012
Is there any way I can make every drawings ALWAYS print in monochrome?
I'm getting really tired of having to set it to monochrome every time I plot something. Or even worse, printing 10 copies of something and THEN noticing i forgot to set it monochrome (just happened). I will never NOT want to plot in monochrome.
View 9 Replies
View Related
Nov 15, 2012
We need to plot revised drawings with clouds for a local building department that demands the clouds be in color with everything else in the standard B/W !!!
Our office pen settings are set in a way that a particular line color has a specific lineweight, i.e., on the screen all the lineweights appear the same, but when plotted the lineweights vary.
My first thought was to to simply turn all the layers to one color (white for example) and the clouded layer to be red, create a PDF in color thus having black lines and red clouds. This works, however, all the lineweights are now the same which makes for an unappealing drawing.
Is there a way to isolate the clouds as one color (red) and monochrome the other layers yet still maintaining their pre-determined lineweights?
View 3 Replies
View Related
Jan 26, 2012
I am trying to plot a multi-colored layout in monochrome. I have gone through the page setup manager and set my style to monochrome. My prints come out in color. I have made my own propety and listed the print to be made in black only. Is there another setting that I need to setup differently to print in Black & White?
View 9 Replies
View Related
Dec 1, 2013
I am trying to print only in black and white from Autocad, so that only line weights can make a difference, but it does not work. Everything turns out in colour, using the colours I used for working in Autocad.
View 8 Replies
View Related
Mar 18, 2013
My earliest digital images are monochrome bitmap TIFFs, and LightRoom 4 regards them as an unsupported format, even though they are not excluded in this list of supported file formats [Edit: 1-bit images are not mentioned, so I suppose that is an exclusion]. LR4 won't import them.
I understand that I won't be able to apply Develop functions unless I convert them to, say 8-bit grayscale, but I'd like them in the catalog in their original form, so I can find them, use them and apply metadata such as tags and captions.
What is the best way to manage monochrome bitmap TIFFs in LightRoom?
View 1 Replies
View Related
Aug 8, 2013
ACAD MEP 2012..Yes all the typical settings are correct.I have a 2-d drawing with 4 viewports, 2 of which will not print Black & White? Thought it might have to do with visual styles but changing them had no effects.
View 3 Replies
View Related
Jan 31, 2013
my DWG is set to monochrome.ctb. Everything prints ok except my 2 isometric 3D viewports which prints in its real color (visual styles are conceptual). Why don't they print also in monochrome? I saw a couple of discussions on that problem but the "hidden" and "hidden 3D" options in shade option isn't working...I want them to stay the same, just print in monochrome with screening! I read about some option called "hidden legacy" but can't find that anywhere.
View 2 Replies
View Related
Feb 19, 2003
I have to convert a CMYK image into a monochrome bitmap and I can't figure out how to do this in Photoshop.
In the menu under image - mode , there is only greyscale option, or if I choose bitmap, there is also no monochrome option.
View 6 Replies
View Related
Jul 30, 2013
I am downloading semi-monochromatic picture files that I will be using for multiple applications. The image is originally semi-monochromatic with red and white being the only colors used. A complex image is created by adding more or less white to the red color. The image for each application I have in mind needs to be distinguished by the primary color of the image. I need to change this color first to green, then to orange, and so on. Is there a global command to change this one color?
I use the term semi-monochromatic because the pictures aren't actually black and white.
View 1 Replies
View Related
Dec 21, 2011
I am trying to plot this floor plan, which has different layers, and each layer has diferent colour. When I select, dwg to pdf, A4@1:00 ISO full bleed with monocrome applied, and do a prewiew of this plot, all of the layers are plotting black like they should exept one, which is showed in the image. The layer is no diferent from the others. I created a new layer named simillar to the one with the issue, moved things across to the new layer, changed new layer colour, and it fixed the issue.
Also, when ready to plot, the autocad comes up with a message saying that I dont have a pdf reader, but I do. I have the adobe reader installed. Usually, when I plot the drawing as pdf it nicely, automaticaly brings up adobe reader with the drawing, and I can quicly review it. Now I just keep getting this message.
Is there a way to "link" the adobe reader, so that it stops jumping out this message, and instead, opens it outomaticly, like normally it does.
View 2 Replies
View Related
Aug 9, 2011
I am using the monochrome plot style and plotting to PDF. My text looks great in the Plot Preview, but once actually hit 'Plot' the line weight of my text and dimensions appears super thick and heavy. They are also assigned to the lightest line weight in the layer property manager.
View 9 Replies
View Related
May 12, 2011
I've the same problem: in autocad Architecture 2011, in "plot style table", there is no "monochrome.ctb". Just mentioned "none" and "new"; How I can put in monochrome into the plot style table?
View 6 Replies
View Related
Jan 15, 2007
I have produced a 3D model drawing in Autocad 2006, then opened three layouts. When I plot the first layout in monochrome it actually previews in monochrome. However, when I plot the other two layouts with the same settings, from the same model, with the same layer assignments, they preview and plot in colour.
View 9 Replies
View Related
Sep 7, 2013
Illustrator CS6 can export a bitmap monochrome file (not grayscale)?I have to export this old format file for a client and i have to understand it's possible.
View 4 Replies
View Related
Oct 24, 2011
I just shot a wedding. Half the images were shot in color, the other half were shot in monochrome(black and white). upon importing into lightroom only the color images would import. With the black and white files I got the error message saying that the files could not be read. I was shooting with a canon rebel t2i (550D), importing into lightroom 3.2 on a mac OS X.
View 1 Replies
View Related
Jan 27, 2012
Our customers have given us some black and white Monochrome Bitmap images at 400 ppi (see attached sample) and 600 ppi of some scanned black and white engineering drawings. Some of the small text on the drawings is not very legible because open areas are filled in with black. Some of the vertical and horizontal lines are ragged (digitized) on the edges. Is there any way that I can improve the visual quality of these Monochrome Bitmap images in Corel Draw (which I use) or Corel Paint (of which I'm not very knowledgeable, or adept)?
View 6 Replies
View Related
Oct 26, 2011
Recently I have had two assemblies change at random times to a monochrome color and I cannot change them back to their respective colors. I can open sub-assemblies and they show as the correct color but when I close them the main assembly and the recently open sub-assembly go back to monochrome. When placed on a drawing sheet they appear the correct color on the screen and printed in color. The Visual Style is Shaded With Edges.
System:
Intel Core T7700 @ 2.40 GHz
8 GB RAM
250 GB SSD
NVidia Quadro FX 1600M
View 6 Replies
View Related
