i would like to change the Cursor of the brush itself. Right now its a simple cross, i need to change it into an red circle. As far Paint net is open source, i would like to know if i am able to change the cursor by myself.
View 9 RepliesI am drawing, brushing or erasing I have the diameter of the pixels I am using. However every now and then all I see is a small crosshair.
I know it is a simple setting, I just cannot seem to find how to switch back to the diameter view.
how to change the brush cursor
View 22 Replies View RelatedHow can I train Photoshop to change the image size of a photo when I pull daigonally on a corner with the cursor?
View 1 Replies View RelatedIs there any way to dig through the discreet folders and possible find the new cursor icon and replace it with the old one? I found a flame artist who could change his batch and action nodes, If he could do this it shouldn't be to hard to change just the cursor, right?
View 3 Replies View RelatedUsing PSP X3 on an Win7 Home Premium system with an ATI HD 5700 Series card.My Version is 13.2.0.35 and video card driver/software was updated 2 days ago.
I do a lot of screen captures but I have not been able to get X3 to include the Cursor in the capture!!I have tried it in Full Screen, Client area, and Window but it never shows up.I have even un-checked it (Include Cursor) and re-checked it to make sure it was set
What happened to using the mouse wheel to zoom & unzoom on the cursor? It will zoom and unzoom, but without regard to the cursor location. I want it back?!
View 11 Replies View RelatedI use iMac i7 with lion 10.7.5..After a "considerable" amount of editing, photoshop just stops responding. For example, the paint brush cursor will move but no paint can be applied. Have about 10-12 layers, guessing abour 70 history steps.
Must exit the app and restart, at which time it will behave normally. I use latest, almost, OS and have 8GB ram.
Upon selecting the Adjust workspace and moving the cursor over the image in the preview area the cursor changes to a dropper and a small box opens which contains 2 columns of data. The column headings are…
Current: Original:
Below them are the values of the R,G,B channels at the cursor position. Moving the cursor around the image in the preview area changes these values. Left or right clicking places a target on the image and changes the colour balance of the image. I presume it is selecting a new value for the White Balance. However, the data values remain identical in the Current: and Original: columns.
The dropper and box are only displayed when the Smart Photo Fix option is selected in the Adjust Palette.
So, how does one get the data values for Current: and Original: to display different values? What is the difference between left click and right click? What is the overall function of this feature?
PaintShop Pro X6 16.1.0.48 x64
I have owned previous versions of Paint Shop Pro, but decided to upgrade again. I really like Paint Shop Pro X4, and it has worked for me in the past on this same machine (Windows 7 HP laptop).
For some reason PSPx4 will not open -- ever -- not at all. The cursor spins continuously. I need to end the program manually. I have installed Corel PSPx4 service pack 3 and this did not work. My computer is healthy.
I have not tried installing and reinstalling PSPx4 because I can't find my disc, but I'm still looking ( I moved recently and I think I misplaced it).
Why did it stop working all of a sudden? I have a bunch of photos to edi.
PSPX5. I've just noticed that the brush size is 1px per side less than is set:
brush size.png (4.14 KiB) Viewed 465 times
I am finding some inconsistencies when using tools provided in Paint.NET.
For 2 examples, I'll simply describe the behavior of the Escape key.
-----------
Exhibit A:
I would like to use Text to type in some letters with different colors. What I would do is press T (shortcut key for Text), select a color, type a letter, press ESC, nothing happened, click somewhere else, click back to the letter, select a different color, type a letter, ESC, nothing happened, repeat...
After I'm done, I press ESC again with nothing happening, and press a different shortcut key to continue editing, like O (shortcut key for Line/Curve).
Exhibit B:
I would like to draw a circle and a line. After finish typing, I press O four times to use the Ellipse tool, draw a circle, and then press ESC. Nothing happened. Next, I press O once to use the Line tool, start drawing a line, and then press ESC. At this point, my drawn line is canceled for good, and I need to either use Redo to recover it, or redraw the line again.
------------
Here I present to you these two exhibits. Notice that sometimes, pressing ESC does nothing other than jumping back to cursor, and sometimes cancelling the action that was done.
Would it be possible if the Escape key has a consistent action throughout all of the tools?
I’m getting a strange cursor when I use the Paint Bucket tool. Instead of the bucket with the pointy bit to show where you’re aiming, I get three tiny paint buckets in a horizontal line, looking a bit like a fragmented ruler, so it is impossible to see where the point of the paint bucket is. I have used CAPS LOCK to get the crosshairs but would refer the normal setting to be available too.
I have shut down the PC and restarted with PS9 as the only app open but I still get this funny cursor. Some of the cursors from other tools are also affected, esp. when I left-click.Have I changed a setting by accident?
I had Corel Photo Paint v.9, have used it for years in addition to DRAW, but recently my computer died and I had to replace it. I installed it on the new machine, which is running Windows 7 Pro 64 bit, but the line tool suddenly started acting nuts. I would move the cursor to where I wanted to start the line and start the line with a mouse click. The line would then dart half-way down the screen and would be nowhere near the cursor's cross hairs making it difficult to work on images.
So, I figured it was a compatibility issue so I bought Corel Technical Suite X6 and have installed it. The line tool does exactly the same thing. The position of the line is nowhere near the crosshairs of the cursor. Is this a new "feature" or is this a bug? If the former, how can I get it to work like I am accustomed to working (I have used DRAW and Photopaint since the mid 1990's, using version 5.0). If the latter, how can I fix it?
When trying to use the clone tool, my initial cursor locations (as picked by me) appears to be about 200 pixels off. I have updated video drivers and mouse drivers to no avail. There was a posting some time back about the same issue, but it seems to be unresolved. The solution was to remove code from the registry.
View 2 Replies View RelatedThis has happened to me a few times. Randomly, when I'm selecting a brush size, the brush cursor will change to a tiny diameter, looks like it's the size of a one pixel brush. Only the cursor is inaccurate though, when I start to paint the actual brush size is fine.
I usually just restart photoshop, but the document I'm working on right now still isn't working right.
If one is usuing a Paint Bucket fill such as horizontal lines, can one alter the fill to make the horizontal lines farther apart?
View 2 Replies View RelatedWhen i click my mouse to draw the cursor moves up and to the left of the position i started which makes any and all editing impossible. Imagine trying to draw a line but the starting point is a half to a full inch up and to the left of where you wanted the line to start. I've tried a clean install even changed my mouse. doesn't do it it drawx4 only photo-paint x4.
View 14 Replies View RelatedMy cursor appears and disappears while in GIMP as I move the cursor over the canvas. I can make the cursor appear but only if there is no movement of the cursor. It makes no difference which tool I select, the size of the canvas, or the level of zoom.
Please note that this only occurs in Gimp, and none of my other applications. It started when I upgraded from openSUSE 12.1 to 12.2. I'm assuming that it has something to do with my input device configuration, but I could be totally wrong.
I have a total of 3 input devices - Core Pointer, Logitech USB-PS/2 Optical Mouse, and Virtual Core XTEST Pointer. Both the Optical Mouse and XTEST Pointer are DISABLED. Core Pointer is the only one enabled. Enabling Optical Mouse and XTEST Pointer give me other problems in Gimp and need to remain disabled.
For the Core Pointer, Mode is set to SCREEN, a message says that 'The axis X has no curve', and the following Axis Settings:
X 1
Y 2
Pressure none
xtilt none
ytilt none
wheel none
In Gimp Preferences->Input Controllers, there are three active controllers - Mouse Buttons, Main Mouse Wheel, and Main Keyboard.
OS: Linux 3.4.11-2.16-desktop i686
System: openSUSE 12.2 (i586)
KDE: 4.8.5 (4.8.5) "release 2"
Display Info:
Vendor: Intel Corporation
Model: G33
2D driver: intel
3D driver: Unknown Gallium (9.0.1)
how would i go about changing the colour of a car so that it looks good, ie white to silver, silver to yellow. i cant get it to look good with the brush. i have seen pics of this,
View 5 Replies View RelatedIn Xcode, we have to define cursor as:
resource 'CURS' (16001) {
$"00 00 00 00"
$"18 00 3C 00"
$"1E 00 0F 00"
$"07 80 03 C8"
$"01 E8 00 FC"
[Code]...
In Windows we use .cur file, simpler.
I want to convert .cur file to the mac format above, how?
I have taken pictures for my husbands company, and one of the distributors wants pictures sent to them in jpeg, and stated the pictures must be 500 x 500 pixels and 300 DPI. I have not been able to make the height and width both at 500 pixels. Can this be done? I have PSP X4.
View 5 Replies View Related(As i did i saved the PSD to DDS) so what will i do. SO this is the one i made I don't know why it look like that but the original picture is like this [URL]...........
View 4 Replies View RelatedSometimes when I am cloning a portion of a single layer, I want to make the copied pixels less opaque. How to I set the clone stamp to make the material I am copying more transparent.?
View 6 Replies View RelatedI just downloaded paint.net. I want to change the color in a picture but i dont know how. Do i need a plug-in or something?
View 1 Replies View RelatedI'm checking out paint.net and it seems cool, though I have one question:
is it possible to change the keyboard shortcuts ?
Currently the increase and decrease of the brush is set to ] and [, though I'm using an azerty keyboard and these aren't on there, so I would like to change that to ) and (. Is this possible ?
Is there Anyway to make a whole single color (without attaching to other colors that are not that color) turn transparent?
View 6 Replies View RelatedI transcribe church registers, due to the poor copies I need to change the background colour as this improves the writing for me to read and transcribe correctly. When I used PSP8 which I am unable to use now I was able to change the colour by using the dropper.
View 4 Replies View RelatedI want to take a selection, see all the colors listed within my selected area, and be able to tweak each color to whatever other color I want. I hope that makes sense, if it doesn't say so and I'll see if I can come up with a different description.
View 2 Replies View Relatedhow to change the clour of the txt
View 1 Replies View RelatedI'm baffled. I do 99.9% of my photo work in Lightroom and then export to jpg. On the rare occasion when I need to remove something from a photo (a fly or leash), I have been using PSP version 9 because I already have it.
However, this morning I opened an 8 Mb jpgs file, did my editing and just saved it (no save as or resizing), and now the file is only 2 Mb.
What the heck? [URL]....