I am drawing, brushing or erasing I have the diameter of the pixels I am using. However every now and then all I see is a small crosshair.
I know it is a simple setting, I just cannot seem to find how to switch back to the diameter view.
how to change the brush cursor
View 22 Replies View RelatedHow can I train Photoshop to change the image size of a photo when I pull daigonally on a corner with the cursor?
View 1 Replies View Relatedi would like to change the Cursor of the brush itself. Right now its a simple cross, i need to change it into an red circle. As far Paint net is open source, i would like to know if i am able to change the cursor by myself.
View 9 Replies View RelatedIs there any way to dig through the discreet folders and possible find the new cursor icon and replace it with the old one? I found a flame artist who could change his batch and action nodes, If he could do this it shouldn't be to hard to change just the cursor, right?
View 3 Replies View RelatedMy cursor appears and disappears while in GIMP as I move the cursor over the canvas. I can make the cursor appear but only if there is no movement of the cursor. It makes no difference which tool I select, the size of the canvas, or the level of zoom.
Please note that this only occurs in Gimp, and none of my other applications. It started when I upgraded from openSUSE 12.1 to 12.2. I'm assuming that it has something to do with my input device configuration, but I could be totally wrong.
I have a total of 3 input devices - Core Pointer, Logitech USB-PS/2 Optical Mouse, and Virtual Core XTEST Pointer. Both the Optical Mouse and XTEST Pointer are DISABLED. Core Pointer is the only one enabled. Enabling Optical Mouse and XTEST Pointer give me other problems in Gimp and need to remain disabled.
For the Core Pointer, Mode is set to SCREEN, a message says that 'The axis X has no curve', and the following Axis Settings:
X 1
Y 2
Pressure none
xtilt none
ytilt none
wheel none
In Gimp Preferences->Input Controllers, there are three active controllers - Mouse Buttons, Main Mouse Wheel, and Main Keyboard.
OS: Linux 3.4.11-2.16-desktop i686
System: openSUSE 12.2 (i586)
KDE: 4.8.5 (4.8.5) "release 2"
Display Info:
Vendor: Intel Corporation
Model: G33
2D driver: intel
3D driver: Unknown Gallium (9.0.1)
In Xcode, we have to define cursor as:
Â
resource 'CURS' (16001) {
   $"00 00 00 00"
   $"18 00 3C 00"
   $"1E 00 0F 00"
   $"07 80 03 C8"
   $"01 E8 00 FC"
[Code]...
Â
In Windows we use .cur file, simpler.
Â
I want to convert .cur file to the mac format above, how?
I'm using CS4. I have multiple layers of text and I want each one to have a different drop shadow effect. When I try to chnge the settings of one layer's shadow, all the layers change. Is there a way to stop this?
View 2 Replies View RelatedI have an image, I just need to changethe text in that image without changing anything else.
View 5 Replies View RelatedI'm not sure what I did to make this happen or how to change it back, but for some reason when I change the size of an object/line it changes the stroke weight as well. (For example, if I drew an ellipse with stroke weight 2 pt, and then increased the size the stroke weight would be 2.856 pt or some such number instead of 2 pt.) How to change this back?
View 3 Replies View RelatedThe attached files are two sprockets. The original part has 30 teeth. I need 34 teeth.
The MODIFIED part has one of my attempts at making 34 teeth. I have tried the following with the same error dialog box (see below):
1. Edit Sketch_6 (associated with Extrusion1) by deleting all but one of the teeth lines (2 arcs and 2 lines that make up a tooth) and making a circular pattern of 34.
2. Same circular pattern, except this time I "Close the Loop" (right-click on one of the teeth line segments > Close Loop > click on all the segments until the loop is closed).
3. Same circular pattern, except this time change the resulting patterned lines into construction lines, trace these lines with arcs and lines of my own (not construction lines), and close the loop on my own lines.
When each of the 3 attempts failed, I tried deleting Extrusion1 and making a new Extrusion feature from Sketch_6. I cannot select what I want in Sketch_6 in order to make the teeth.
I'm at the point where I'm just going to take the dimensions from the circular pattern sketch of 34 teeth, delete Extrusion1 and Sketch_6, and make my own sketch and extrusion.
For the future, I really would like to know - why is it so difficult to alter features like this? Yes, I understand that Sketch_6 is not fully constrained, and on top of this I am not privy to how it was generated in the first place (this is a part file from a vendor). But it does not strike me as something overly complicated for the Extrusion feature to recognize a change in its associated sketch. This is not the first time I have encountered something like this.
I want to change the size of the image in Gimp to 3957x4429 px (67x75 cm) at a 150dpi (the image we have has a 300 dpi.) When i do this in image - print size it keeps changing the width.
The system is not allowing me to get the picture a few cm larger. Is there any way I can overwrite this?
I've been using Photoshop CS2 for several years to enhance my photographs, but just now have encountered something simple I cannot find out how to do.  I have on the background layer a picture of a room interior with the exposure set mostly for the open window, but the rest of the room is very dark. On the only other layer, the upper one, I have the same shot exposed correctly for the room, which overexposes the window area. The upper and lower layers are perfectly superimposed, and the upper layer is at 100% opacity.Â
I have selected the window on the upper layer and want to change the selected area's opacity to blend properly with the window on the bottom layer without changing opacity of the rest of the layer. No matter what I do, changing opacity seems to affect only the entire layer, and I haven't figured out how to isolate the selected area for the opacity change.
Â
I can cut the selection to reveal the darker window on the bottom layer, but this doesn't give me the flexibility I need to balance the two exposures. An opacity change would be ideal.
Photoshop CS3 and have stumbled across a bit of a problem. It seems that I have managed to lock my Photoshop file from all editing as I am unable to use any tool apart from the Hand Tool.
View 6 Replies View Relatedhow to prevent photoshop from automatically changing cursors from BRUSH SIZE to the precise?.
I've tried the reset but it does not work.
i downloaded the trial version of Photoshop CS4, and as soon as i installed it i had this problem. when i use the tablet, it would be fine and prefectly responsive however, if i walk away from the laptop for about 20secs or more, i just cant seem to get any response on photoshop when i use the tableti am not sure what is the real cause of the problem but its a constant annoyance, and the only way i can solve it, is to exit photoshop, and start it up again.only to have the same thing occur if i pause to do something else or alt+tab to check my email or whatever... i can confirm that theres nothing wrong with my tablet as it works for my other programs like Manga Studio EX or MS paint(lol)so i have NO idea why it is so buggy on Photoshop CS4. photoshop and vista just doesnt seem to get along... last year i bought photoshop CS3, installed it on my laptop(vista)
View 3 Replies View RelatedI've been trying the trial of CS3, and I'm encountering major performance issues which I can't fathom.
At first I tried it on my old machine, which was good for its time, but perhaps getting a little dated.
I built a new computer just last week, which is very powerful (Intel Core 2 Duo E8400; GeIL 4GB 1066MHz memory; Nvidia GTX 260) and CS3 performance is even worse than it was on my old machine.
Simply moving the mouse around on screen results in horrendous lag (the screen flashes each time this happens) to the point where it's so frustrating to use that I close the program. It generally runs fine; it opens and loads files and does its thing without any problems, and I've certainly noticed a big increase in performance when opening massive files, but moving the actual curser around the screen is an absolute nightmare, which results in general use being a nightmare. Zooming in and out with the scroll-wheel makes the whole screen flash too.
I haven't got a clue what's causing this, as people I know who use CS3 haven't encountered the problem. CS2 runs like a dream.
The OS I was using on my old machine was XP (32 bit), while I'm now using Vista 64.
I am having trouble with my tool cursors. Sometimes the crop tool changes to a crosshair and every brush size will only produce a small crosshhair cursor. This makes it impossible to see the area being worked on.
Rebooting fixes things for a very short time. Deleting preferences didn't work. And even a reinstall went bad after a few hours work. I have a P4 2.8GH processor and 1 gig RAM on XP Pro. Shouldn't those resources be sufficient to handle things?
creating some effects with an image, I've done something inadvertantly that has made my erase and brush cursor into a crosshair looking thing.,.. the sizing keys ([) (]) have no effect on it... no circle that grows and shinks when pressing left and right bracket. Checking at Edit/preferences/cursors... I see default setting I think:Painting Cursors=Normal Brush tipOther=standard
View 3 Replies View RelatedDouble cursor issue in CS5/6?
Â
As I enlarge my cursor (for brushes, healing tools, whatever) at some undetermined point (different for all pictures) suddenly another cursor appears in the top left corner of CS5/CS6.The cursor is a duplicate of the cursor I am working with, stays in the top left corner of the app, and enlarges and shrinks as I scroll my mouse wheel up and down or use the [ and ] keys or however I enlarge and shrink my cursor.
Â
I have tried the desktop 99% thing, it doesn't work.
I have tried Graphics Card on and off, it doesn't work
I have tried wiping out my settings and starting from scratch, it doesn't work
I installed CS6 over my CS5, it doesn't work
I have tried everything along these lines and nothing is working!
[URL] .....
how to get the cursor to stop disappearing in pscs6 both on tablet and mouse.
View 3 Replies View RelatedI am running Mountain Lion on an older iMac (2007) 4 gb ram, and newer (2011) Macbook Pro with 8 gb of ram. Cursor disappears and will not comeback without click in finder or another program.
View 30 Replies View Relatedi don't have a normal cursor, which in my case is an arrow. instead i have what looks like three tiny hands in a row. this makes it very difficult to be accurate when cropping, or tilting. i uninstalled and reinstalled, to no avail. i'm using cs4 extended
View 2 Replies View RelatedI'm still playing around with CS-2 on the Mac and have got a question about adjusting how much the cursor will move, can't seem to find a place to adjust it.
I had cut out an object from one photo and was trying to place it on another photo. However it dosn't seem to want to move exactly to the place I would like to put it. The increments seem to be large when I try to move it around.
I use Photoshop CS4, Vista OS, 8 GB Rab, 1 TB Diskspace, nad Nvidia Video Card. Recently I have noticed I get DOUBLE CUSERS when I use certain tools such as; the Move, Crop, Eye dropper, Stamp, Pen, Arrows, Hand, Zoom, Color Picker Eye Dropper. So far I have done the followings; downloaded the latest video card driver, uninstalled and reinstalled PS, downloaded updates for PS, downloaded uptates for Vista. I have checked the preferrances and they are OK. I have contacted the Photoshop's teck people several times and they have not been able to help.
View 3 Replies View RelatedSometimes when I'm working with Photoshop CS2 all of the sudden my cursor disappears! (This can occur with brushtool, ellipse tool, etc)
Well.. It's not totally gone; It's just invisible above the window I'm working in. When I put it on my toolbar for example it's there. And when I want to put it above my canvas it disappears again. When I try to draw something anyway, it gives some sort of very thin line which kind of shows what I'm doing, but as soon as I release the mouse button it all disappears again. Closing/opening Photoshop or rebooting the computer don't help.
cursor locking in photoshop, ie you are able to select items from the toolbox but the cursor doesnt change from a pointed arrow. To say a text cursor. You can move layers around the screen with the keyboard but not with the mouse.
This happens about 10 mins into using photoshop and I have to restart photoshop for it to become "unlocked"
When I am using tools such as Eraser, Brush, or etc. it displays the Precise cursor and not the shape of the brush tip. I never understood why this happens. I haven't been able to catch on as to what I've done previously to cause this. I've tried going to Edit>Preferences>Display&Cursors but that is set to Normal Brush tip. Any ideas?
View 5 Replies View Relatederaser cursor…. When it circle’s size is small, it the whole outline shows up. But as I zoom in, or expand the cursor size part of it disappears and gets to the point where only about 25% of it is left visible.
View 4 Replies View RelatedI mean any shape outline when using things like brush, blur, erase. If the cursor size is very small, say less that 60 pixels, the whole shape is visible. Let's just say it's a circle, if it get's any bigger it starts to disappear as the size goes up. All that will be left is a small line showing the very top left of the circle.
This is a nuisance, especially for custom brushes where I can't see where the brush will be placed.
I've been playing around with PS for over 18 months and I've never had this happen. My cursor changed to cross hairs and will not change back. Even when I pick a brush that should be round like the Clone Stamp Tool, Eraser, Healing brush etc. I thought maybe my Preferences got corrupted and checked there but nada.
View 3 Replies View Related
