Paint Shop Pro :: Smart Photo Fix Cursor Pop Up Box?
Nov 27, 2013
Upon selecting the Adjust workspace and moving the cursor over the image in the preview area the cursor changes to a dropper and a small box opens which contains 2 columns of data. The column headings are…
Current: Original:
Below them are the values of the R,G,B channels at the cursor position. Moving the cursor around the image in the preview area changes these values. Left or right clicking places a target on the image and changes the colour balance of the image. I presume it is selecting a new value for the White Balance. However, the data values remain identical in the Current: and Original: columns.
The dropper and box are only displayed when the Smart Photo Fix option is selected in the Adjust Palette.
So, how does one get the data values for Current: and Original: to display different values? What is the difference between left click and right click? What is the overall function of this feature?
PaintShop Pro X6 16.1.0.48 x64
View 3 Replies
ADVERTISEMENT
Sep 5, 2011
Smart Photo Fix box was resizable, or barring that, if the box did not take up over 1/4 of my monitor!
This box obscures far too much of the image I am trying to correct! And it does not need to be this large based on its content!
View 1 Replies
View Related
Sep 6, 2011
When I use the Smart Photo Fix command, and check Advanced Settings I see the black & white correction options, BUT I do NOT see the before & after left & right preview panes that are necessary to let me choose black & white & grey points on my image.
There seems to be another post/thread on this topic BUT unfortunately I cannot open that post: when I try I see the message: No post matches the time frame selected even though I have set this to ALL POSTS.
View 4 Replies
View Related
Aug 2, 2010
Using PSP X3 on an Win7 Home Premium system with an ATI HD 5700 Series card.My Version is 13.2.0.35 and video card driver/software was updated 2 days ago.
I do a lot of screen captures but I have not been able to get X3 to include the Cursor in the capture!!I have tried it in Full Screen, Client area, and Window but it never shows up.I have even un-checked it (Include Cursor) and re-checked it to make sure it was set
View 10 Replies
View Related
Sep 11, 2011
What happened to using the mouse wheel to zoom & unzoom on the cursor? It will zoom and unzoom, but without regard to the cursor location. I want it back?!
View 11 Replies
View Related
Dec 21, 2012
I have owned previous versions of Paint Shop Pro, but decided to upgrade again. I really like Paint Shop Pro X4, and it has worked for me in the past on this same machine (Windows 7 HP laptop).
For some reason PSPx4 will not open -- ever -- not at all. The cursor spins continuously. I need to end the program manually. I have installed Corel PSPx4 service pack 3 and this did not work. My computer is healthy.
I have not tried installing and reinstalling PSPx4 because I can't find my disc, but I'm still looking ( I moved recently and I think I misplaced it).
Why did it stop working all of a sudden? I have a bunch of photos to edi.
View 8 Replies
View Related
Jan 5, 2012
I have a new virtual tour 360 business and I want to "perfect" my panos. After I stitch the four pictures together, I'm left with the tripod showing on the bottom of the pano. I want to delete the tripod, but don't know the best way to do this. I have been trying to do this with smart carver, but it seems to take a long time and not having the success I would like. I thought it might be easier if I took a picture of where the tripod was, minus the tripod and then merge the two pictures together. It needs to be perfect, because there might be an instance of a wood floor that needs to match up.
View 2 Replies
View Related
Dec 7, 2012
PSPX5. I've just noticed that the brush size is 1px per side less than is set:
brush size.png (4.14 KiB) Viewed 465 times
View 3 Replies
View Related
Jul 25, 2013
I am trying to remove some wires in front of a complex background. (I tried a different spot for the photo, but didn't really work....so I was stuck with the wires.) Anyway, apart from just zooming way in and using the clone tool, do I have any options with smart cloning or healing? I searched the PSPX5 file for smart and heal etc., but didn't find anything.
View 14 Replies
View Related
May 3, 2012
I recently had to reinstall PSP X3 and since then when I use Smart Carver any transparent areas are lost - they appear as solid white.
View 4 Replies
View Related
Dec 10, 2011
I've used Corel Photo Album in the past and am familar with the tag/search feature. Here's my problem. I created two tags - test1 and test2. I tagged a photo with both test1 and test2. I created a Smart Collection as follows: Find photos that match ALL, TAG contains TEST1, TAG contains TEST2. when I click PREVIEW no photos are found. If I click on the individual tags Test1 or Test2 the photo is found. Am I missing something?
I tried removing and reinstalling Paintshop Pro X4 but I am getting the same result. I have ran this test in Corel Photo Album and it works fine.
I am running PSP X4 14.1.0.5 SP1
Vista Home Premium 64-bit SP2
Intel i7 CPU950 3.07ghz, 9.0 gb ram
View 5 Replies
View Related
Jan 15, 2012
I've just been watching a video about using Smart Objects in Ps and was just wondering if this has any relevance to how we use objects in PP?
View 6 Replies
View Related
Sep 10, 2012
I have two photos, shooted probably the same day, by the same photograph in the same place !But the pose is a bit different.
first one is in high resolution and in black & white nuance. second one is a small resolution and in full colors. I wish re-color the black&white photo using exactly the same nuance from the colored one.
can i "copy" all the colors from the color-one to the b&w one ?
here are the photos :
the black and white to recolor [URL].......
the source color to use
View 14 Replies
View Related
May 18, 2012
Smart carver in photopaint X6? I've tried it twice, and it locked up both times. P4 HT, 4GIG, win7-32.
View 2 Replies
View Related
Dec 23, 2013
I had Corel Photo Paint v.9, have used it for years in addition to DRAW, but recently my computer died and I had to replace it. I installed it on the new machine, which is running Windows 7 Pro 64 bit, but the line tool suddenly started acting nuts. I would move the cursor to where I wanted to start the line and start the line with a mouse click. The line would then dart half-way down the screen and would be nowhere near the cursor's cross hairs making it difficult to work on images.
So, I figured it was a compatibility issue so I bought Corel Technical Suite X6 and have installed it. The line tool does exactly the same thing. The position of the line is nowhere near the crosshairs of the cursor. Is this a new "feature" or is this a bug? If the former, how can I get it to work like I am accustomed to working (I have used DRAW and Photopaint since the mid 1990's, using version 5.0). If the latter, how can I fix it?
View 10 Replies
View Related
Dec 17, 2012
When trying to use the clone tool, my initial cursor locations (as picked by me) appears to be about 200 pixels off. I have updated video drivers and mouse drivers to no avail. There was a posting some time back about the same issue, but it seems to be unresolved. The solution was to remove code from the registry.
View 2 Replies
View Related
Sep 25, 2012
Is there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies
View Related
May 18, 2011
When i click my mouse to draw the cursor moves up and to the left of the position i started which makes any and all editing impossible. Imagine trying to draw a line but the starting point is a half to a full inch up and to the left of where you wanted the line to start. I've tried a clean install even changed my mouse. doesn't do it it drawx4 only photo-paint x4.
View 14 Replies
View Related
Jul 3, 2012
I am working on a photo of a city skyline that I took. I am looking to superimpose blue sky and clouds which normally isn't a problem if there were only buildings. The white spaces in between tree leaves such as palm trees are especially challenging to fill. They can be hundreds of distracting white spots in the scene to fill .
View 2 Replies
View Related
Dec 29, 2012
Have used Corel photo album 6 for many years and loved it, was very easy to use. When I got my new laptop, I was told that my program was outdated and was recommended that I purchase Corel paintshop Prox4, so I did. I would like to burn my pictures to a CD or DVD for backup and to share with my family, only. My old program had an easy one step button to click on to make a CD/DVD. I find this product to be difficult to use for an average person just wanting to have a little fun with their pictures and doing some minor corrections.
View 2 Replies
View Related
Nov 13, 2011
I vaguely remember a process (like the photo merge tool) that let you paint in red what you wanted to get rid of and paint in green what you wanted to keep. It didn't have to "merge" files. I tried it a couple of times with pretty mixed results (back in X3 I think.) Is there a similar tool in X4 or can you use photo merge for this? (I tried opening photo merge with one image, painting it in red and green,clicking process, but nothing happens on the image.) I will resort to the object remover or clone brush if my mind is playing tricks on me about this tool, but I wouldn't mind trying it in this tricky situation.
View 2 Replies
View Related
Nov 4, 2013
I have used PSP since version 2, so have been at it for awhile. Just upgraded to 6, as I was using version 4.
The problem I have is when I am in the edit area, and have a photo on the screen I use my mouse wheel to enlarge or shrink depending on my needs. The old version the windows box around image would also resize with image. I have attached a few images. I normal could fix this in the settings, but for some reason the window will not follow the image size as I enlarge or shrink? It does when I actually resize image, but I need this to do that when I am just using mouse wheel to make bigger or smaller on my screen.
View 14 Replies
View Related
Jun 16, 2013
how do you take a photograph and make it into artwork you can use on a t-shirt design? I guess I'm saying so that it looks like a drawing rather than a photo. currently I'm using PSPX2.
View 1 Replies
View Related
Dec 24, 2011
I saw a tutorial on youtube and it is something I will like to do on my own. But with the tutorial, I have tried over and over again without getting the same result. How do I do this using PSP X4.
This is the url link [URL]....
View 1 Replies
View Related
Aug 1, 2013
I have several thousand photos and I need to edit the names with some system that uses my time efficiently. In the past I used windows explorer, which allowed me to modify groups of titles but now I just updated to windows 7 and it does not seem to allow that. Is there some way with Paint Shop Pro to modify the names of groups of photos - extract certain characters or words, add other characters or words, etc?
Or perhaps there is a photo organizing program that provides that kind of tool?
View 2 Replies
View Related
Jan 25, 2012
I just want to be able to add text to a photo. I follow the steps, choosing 12pt, but when I try to type on the photo, I can tell something is trying to show up on the photo, but it is so tiny, it is not visible.
View 4 Replies
View Related
Jan 1, 2012
As a new user of PSPX4 Ultimate Edition I would like to know if any of you could direct me to a photogallery where the use ofPSPX4 is the the unique software used for the development of the photos.
View 1 Replies
View Related
Sep 12, 2011
Joined the recent webinar on X4 and very impressed with the product. I currently use Photoimpact X3 but looking to change to the new product.
How do I import photos of all different sizes and output to a 800 x 600 photo suitable for import to a digital photoframe? In Photoimpact, I set up a new image that is 800 x 600, make changes to the photo (crop, hue, etc), resize so that the minimum ht or wdth is 600 or 800, right click, copy, move to new image, paste, then move the image about until I am happy with the finished photo and save to a file that will subsequently be copied to a USB pen drive.
View 3 Replies
View Related
Apr 28, 2012
New to this forum and PSP (X4 Ultimate). Working on a raw file (dng) in the Edit tab, I make changes then save to a jpg in another folder. The next day I want to undo some of the changes so I edit the dng raw file again but all my previous changes are no longer available. Am I doing something wrong? Or are my previous changes just no longer available in the raw file? Doesn't PSP keep track of changes made to raw files so you can continue to evolve the image? As I said, I am new at PSP so I hope I'm just doing something wrong. I have used Lightroom for a while now but I really like what PSP can do and the speed to make changes , especially to portraits.
View 2 Replies
View Related
Dec 18, 2012
Is it possible to directly send a photo from PSP X5 using my gmail account and if so how?
View 3 Replies
View Related
Sep 4, 2011
I just installed PSP X2 Ultimate and after first memory card use, I unchecked Photo Down loader so it won't run when I start the computer. Now when I "manually" move files from my memory card (SD) to my hard drive, I am Not able to delete those file on the memory card. Nor can I simply Move the files to my hard drive.
I had no problems before installing PSP. Now to remove the files I have to reformat the card(s) each time.
Seems like Photo Down loader put some hooks in the OS to operate and didn't remove them when I disabled it.
View 5 Replies
View Related
