when I select an edge for example the edges close to it are selected as well and turn yellow and the farther ones turn red and move when I move the edge I selected. I'm pretty sure this a simple problem, like a button I need to toggle, but I seriously can't find it. How do I select individual edges?
EDIT
I found out that this was cancelled by just pressing B.
I'm trying to snap a head with it's neck with the merge edge tool, but somewhere along the way, the edges lost there border edge characteristics and now I can't merge the edges. Is there a way to make the edges back to the way they were?
View 1 Replies View RelatedThis is probably just me not being up to speed yet, but once I combine a set of polygons, is there an easy way to still change the attributes of the original individual objects?
Prior to combining them, each object appears in the Outliner individually and I can select it there and change its attributes...color, etc. But I need to lock them together to keep their relative positions, and combining them does that perfectly. But afterward, the individual list in the Outliner doesn't seem to work anymore...the 'polysurface1' that was created has all the attributes crammed together, and having to scroll through all the tabs is a pain in the neck. Isn't there some way to combine objects and still readily change the colors or other attributes of the separate parts? Or, as I originally wondered about, is there an easier way to hold them in position without combining them?
I can't seem to be able to select multiple points with the marquee. I'm on a mac... Usually you can select a grouped object, switch to point component and grab a whole chunk of points, then move them etc. I can't do this anymore!
View 1 Replies View RelatedI have a problem with selecting multiple objects!!! Everywhere it says that you have to hold shift and select the objects you wish but when I do this it selects all the objects in between! How can I change this?
View 4 Replies View Relatedlets say I marquee select the vertices on a cube in an orthographic view (top view or side view) only the vertices facing the camera get selected. And to clarify, CAMERA BASED SELECTION IS TURNED OFF. Also, not sure if it is related, but backface culling in preferences is also turned off. This usually will not happen in perspective view; but yesterday it did start happening in perspective view as well. And even more strange, it does not affect all meshes in the scene. Only some will react this way.
This bug only recently started happening and it is driving me nuts. I have been running 2013 on this machine since it was released, but not until recently did this bug start to occur; so I am wondering if I accidentally turned something on/off?
I've got a good grasp on 3D modeling and I've taken numerous tutorials to get started.I revolved a container profile from an Illustrator path and I've assigned a mia_material. It's basically a cylinder that I need to map a label onto and my problem is two fold...
1. I am unable to select faces (face mode). In my RMB popup menu, I see "Surface Point", not "Faces".
2. So then I just add the label file to the whole thing, choose Create UVs -> Cylindrical mapping and I am unable to edit, re-position and scale the image to the cylindrical faces.
I'm using the Morpheus rig (fantastic rig, by the way) in Maya 2014 and would like to select all of the control curve shapes so that I can place them in a display layer (an easy way to turn all the NURBS curves on the rig invisible without turning my parented props invisible, too!).
In order to do this, I cannot simply shift-click all of the control curves. I need to select all of these curves' shape nodes (which are appended with "_animShape"). I attempted to select them all by entering "*_animShape*" (without quotes, of course) into the Input Box, but I receive the "No object matches name" error. I also tried "select -r *_animShape*" in the Command Line, to no avail.
I do not want to have to spend 30 minutes to an hour scouring the Outliner for every single shape node (mind you, it's a very complex and sophisticated character rig!). Am I using wildcards incorrectly? how I can select all of these nodes at once?
I'm having a huge problem trying to select the vertices both in the front and the back of my object. I am familiar with backface culling, and the option is not working. I have tried toggling backface culling in the viewport, preferences, mesh component display and polygon display options. None of these options work. I want to be able to select all the vertices on a model, regardless of certain objects/faces being in the way. However, if there is a face in front of the vertice I am trying to select, Maya won't let me select it.
View 3 Replies View RelatedMy model loses lambert on only certain faces every so often. Might be related to clicking on camera or trying to extrude certain edges. I want to delete the camera but this happens to the model every time i touch the camera. I can't reapply the lambert by pressing 6 or assigning new material. if you know what's happening.
View 1 Replies View RelatedI'm creating a face, but what I want is to have whatever happens on the right to happen on the left, instead of clicking each point to move the edges. I tried just cutting the face in half and duplicating, but I don't know how to flip second copy.
View 2 Replies View RelatedI have several edges that will not delete. There are no faces connected, so the edges are suspended in space. I can select any number of edges but when I press delete they just deselect. I don't have more then one line occupying the space, nothing is hidden, and restarting maya hasn't worked.
View 3 Replies View RelatedI am using Maya 2012. I am doing a tutorial for Maya 2011. It is directing me to do some selecting and transformation to my mesh using camera based selection. The tutorial says:
1. double click the selection tool icon in the toolbox. the tool settings editor appears.
2. In the common selection options selection underneath marquee, turn on camera based selection.
3. Right mouse click the mesh and select vertex from the marking menu. The vertices appear on the mesh.
4. While looking at the front of the mesh, select the vertices that need to me moved by holding the left mouse button at one corner dragging a marquee selection over them. the vertices should be selected.
I selected the “turn on camera based selection” in the selection icon toolbox settings editor. But I can’t select the veritces using a left mouse click bounding box or by selecting the vertices individually. The vertices just won’t highlight or select. If I want to select I have to turn off the camera based selection.
Is there some way to make the Scale Tool stop when multiple selected verts or edges are aligned, like in Max? I've noticed that you can overshoot when trying to align this way. I suppose there is always snapping to grid..
View 2 Replies View RelatedWhat I'd like to know is whether Maya can do accuracy.
For instance: Is it possible for me to select two edges or vertices and type in an exact distance that I would like to have between them.
Very fine accuracy is not required.
After closing a polygon hole using bridge tool, I always get disconnected edges so my question is how to do a proper bridge operation that won't end up with open edges?
View 3 Replies View Relatedi am modeling a cello.... the forward edge of the body frame is a single face. in order to bevel it, i have to select all the edges... there are lots. for reasons that surpass understanding, MAYA does not recognize the edges of a 'corner' to be an edge loop. nor will it retain the selection with a selection mode change as some apps will (ie: select face, change to 'edge select' and have all the edges selected).
is there some simple way to select ALL the edges of a face?
The image shows what my problem is. I can't select faces unless I go inside the object, but the normals point outwards, and I have double edges and verts that merge won't fix. URL...
View 1 Replies View RelatedI am trying out Maya 2012 and when i select faces or vertices and try to move on individually, the whole model move. I don't need that, i just need to move the face or vertice alone not the whole image. Also is there any way to download tutorial and installing it into Maya 2012. where i am working with Maya 2012 don't have internet to browse right away.
View 5 Replies View RelatedI know how to use the various menu items to select rings and loops, and even understand that double-clicking will select an entire loop/ring, but how do I select a range of loops/rings?
After selecting the first edge, then double-clicking on a second only results with the entire loop/ring getting selected. A single-click will merely add the next selection to the first, but not fill in the range in between. This used to be more intuitive. What has changed? I've tried using additional keys to no avail.
It seems the bridge tool does not merge edges as one would expect it to. I realize that the workaround is to follow the bridge operation with a merging of the edges on either side of the bridge. Shouldn't such a common operation be done correctly?
Maya 2014 / Mudbox 2014
27" iMac (late 2012)
3.4GHz Quad-core Intel Core i7 with 32GB RAM
NVIDIA GeForce GTX 680MX 2GB GDDR5
I'm brand new to Maya just started last night. I'm trying to join two edges of two seperate polygons to achieve one nice smooth edge. I select the merge edge tool and select one edge - its all good - then I try to click another and nothing happens; and ofcourse when I hit enter it says select more than one edge .
View 2 Replies View Relatedim having a hard time smoothing the edges of my character. i tried deleting the hard/solid edge but maya cant and always ->// Warning: Border edges cannot be deleted merged yes its already merged with the body... i tried to relax the vertices but still didnt work
View 1 Replies View RelatedSo, say I created a complex 2D curve, then used planar to make a surface with it, and now want to sculpt that surface to add some dimension to it. Is there any way to lock down the trim edges so they stay put? I tried selecting all trim edges, going to the channel box, and selecting Freeze -> All, but this didn't work.
View 2 Replies View RelatedSo, in max there is a way to turn this off. So that when you select an object the edges are not visible. That way, when you select and object and have a look at it, you do not have to be distracted by the wire frame.
Is there a way to do this is Maya? I'd lke the geo to appear as flat shading without the wireframe visible even when I select it.The reason is, I want to select it, and work on the UV mapping. I'd like to make some changes to the map, and see how they look on the model without having to deselect the mesh each time I make a change and what to see it without the wireframe.
Would this be a problem when exporting, sculpting, final rendering etc. Or would i have to rebuild the edges?
View 2 Replies View Relatedso in the texture editor. as far as i know we can only move the verts around (with F12). we can select edges, to see where they relate on the mesh, but we can't move them. is there any way to move edges of the layout??
View 3 Replies View RelatedHow do I seperate the edges at these two vertexs (red circles) and connect them together (green line)
View 1 Replies View RelatedI have been trying to figure out if there is a more efficient way of doing this for some time. It seems so basic but it always comes to play in my smoothing process.
For all you more experienced modelers, what is the best way to have the edges and corners stay at their 90 degree angles when smoothing while not compromising the roundness of the surface with artifacting or pinching in the corners. I find this problem when creating extrudes with sharp corners on curved/ round surfaces then smoothing them.
How can I hide the measurements displayed on the faces and edges of my mesh here?
View 2 Replies View RelatedI have been having this problem for a while now that whenever I extrude or create something thats not totally smooth the edges by default are hardened. For example if I create a 12 faced cylinder it will hard edge everything including the verticle edges. Back when I first started using Maya i dont remember having to select specific edges to soften which can get very tedious and take up time.
I feel like there should be some sort of way to harden horizontal edges and soften verticle edges but I cant find the solution anywhere. Is there any way to change the default soften/harden edges?
Will post pictures upon request.