I have several edges that will not delete. There are no faces connected, so the edges are suspended in space. I can select any number of edges but when I press delete they just deselect. I don't have more then one line occupying the space, nothing is hidden, and restarting maya hasn't worked.
View 3 RepliesI'm trying to snap a head with it's neck with the merge edge tool, but somewhere along the way, the edges lost there border edge characteristics and now I can't merge the edges. Is there a way to make the edges back to the way they were?
View 1 Replies View RelatedMy model loses lambert on only certain faces every so often. Might be related to clicking on camera or trying to extrude certain edges. I want to delete the camera but this happens to the model every time i touch the camera. I can't reapply the lambert by pressing 6 or assigning new material. if you know what's happening.
View 1 Replies View RelatedI'm creating a face, but what I want is to have whatever happens on the right to happen on the left, instead of clicking each point to move the edges. I tried just cutting the face in half and duplicating, but I don't know how to flip second copy.
View 2 Replies View RelatedIs there some way to make the Scale Tool stop when multiple selected verts or edges are aligned, like in Max? I've noticed that you can overshoot when trying to align this way. I suppose there is always snapping to grid..
View 2 Replies View Relatedwhen I select an edge for example the edges close to it are selected as well and turn yellow and the farther ones turn red and move when I move the edge I selected. I'm pretty sure this a simple problem, like a button I need to toggle, but I seriously can't find it. How do I select individual edges?
EDIT
I found out that this was cancelled by just pressing B.
What I'd like to know is whether Maya can do accuracy.
For instance: Is it possible for me to select two edges or vertices and type in an exact distance that I would like to have between them.
Very fine accuracy is not required.
After closing a polygon hole using bridge tool, I always get disconnected edges so my question is how to do a proper bridge operation that won't end up with open edges?
View 3 Replies View Relatedi am modeling a cello.... the forward edge of the body frame is a single face. in order to bevel it, i have to select all the edges... there are lots. for reasons that surpass understanding, MAYA does not recognize the edges of a 'corner' to be an edge loop. nor will it retain the selection with a selection mode change as some apps will (ie: select face, change to 'edge select' and have all the edges selected).
is there some simple way to select ALL the edges of a face?
The image shows what my problem is. I can't select faces unless I go inside the object, but the normals point outwards, and I have double edges and verts that merge won't fix. URL...
View 1 Replies View RelatedIt seems the bridge tool does not merge edges as one would expect it to. I realize that the workaround is to follow the bridge operation with a merging of the edges on either side of the bridge. Shouldn't such a common operation be done correctly?
Maya 2014 / Mudbox 2014
27" iMac (late 2012)
3.4GHz Quad-core Intel Core i7 with 32GB RAM
NVIDIA GeForce GTX 680MX 2GB GDDR5
I'm brand new to Maya just started last night. I'm trying to join two edges of two seperate polygons to achieve one nice smooth edge. I select the merge edge tool and select one edge - its all good - then I try to click another and nothing happens; and ofcourse when I hit enter it says select more than one edge .
View 2 Replies View Relatedim having a hard time smoothing the edges of my character. i tried deleting the hard/solid edge but maya cant and always ->// Warning: Border edges cannot be deleted merged yes its already merged with the body... i tried to relax the vertices but still didnt work
View 1 Replies View RelatedSo, say I created a complex 2D curve, then used planar to make a surface with it, and now want to sculpt that surface to add some dimension to it. Is there any way to lock down the trim edges so they stay put? I tried selecting all trim edges, going to the channel box, and selecting Freeze -> All, but this didn't work.
View 2 Replies View RelatedSo, in max there is a way to turn this off. So that when you select an object the edges are not visible. That way, when you select and object and have a look at it, you do not have to be distracted by the wire frame.
Is there a way to do this is Maya? I'd lke the geo to appear as flat shading without the wireframe visible even when I select it.The reason is, I want to select it, and work on the UV mapping. I'd like to make some changes to the map, and see how they look on the model without having to deselect the mesh each time I make a change and what to see it without the wireframe.
Would this be a problem when exporting, sculpting, final rendering etc. Or would i have to rebuild the edges?
View 2 Replies View Relatedso in the texture editor. as far as i know we can only move the verts around (with F12). we can select edges, to see where they relate on the mesh, but we can't move them. is there any way to move edges of the layout??
View 3 Replies View RelatedHow do I seperate the edges at these two vertexs (red circles) and connect them together (green line)
View 1 Replies View RelatedI have been trying to figure out if there is a more efficient way of doing this for some time. It seems so basic but it always comes to play in my smoothing process.
For all you more experienced modelers, what is the best way to have the edges and corners stay at their 90 degree angles when smoothing while not compromising the roundness of the surface with artifacting or pinching in the corners. I find this problem when creating extrudes with sharp corners on curved/ round surfaces then smoothing them.
How can I hide the measurements displayed on the faces and edges of my mesh here?
View 2 Replies View RelatedI have been having this problem for a while now that whenever I extrude or create something thats not totally smooth the edges by default are hardened. For example if I create a 12 faced cylinder it will hard edge everything including the verticle edges. Back when I first started using Maya i dont remember having to select specific edges to soften which can get very tedious and take up time.
I feel like there should be some sort of way to harden horizontal edges and soften verticle edges but I cant find the solution anywhere. Is there any way to change the default soften/harden edges?
Will post pictures upon request.
I've been modelling in Maya for less than a day so go easy on me!
I'm in the process of making a traffic light and have got a bit stuck on the shade around the light.
I first made a profile curve and revolved it to get a kind of cup shape. The profile curve double backs on itself so the revolve is not completely flat.
Next I projected a curve onto the side of the revolve to get the wavy shape of the light shade, and trimmed the excess off.
Now I have my lovely traffic light shape, but the ends where the revolve was trimmed are not attached. (Because I double backed the profile curve)
Is there any way I can close up this gap?
(I've attached some screenshots).
How to delete all ik handle nodes in a scene and all constrain nodes in a scene.
My rig is so complex that going in and deleting one by one seems like a crazy process but if there was a way to get the outliner to show only ik_handles and or constrain nodes then I could just select them and delete them and this would save me a lot of time.
I created a very simple two poly object and then deleted my construction history and now I cannot seem to create a new polygon in the scene unless I turn off interactive creation.
If I choose create>sphere etc the little sign that says drag on grid appears but when I do nothing happens. I made a new scene and did the same thing and I don't have the same problem so Im not sure why in this particular scene.
I would like to know how to delete only certain parts of history but keeping its effects. For example, a cube has a smooth polygon, bevel, and blend shape history. How do I delete only the bevel history but at the same time keeping the bevel? Don't tell me to do the bevel first, delete history, then smooth and blend shape.
View 2 Replies View RelatedIs there a way to delete parts of history while leaving important elements? (because if i delete all history the object is no longer bound to what it belongs to)
View 7 Replies View RelatedI have a problem when I am modeling my character or rather the character from the animation academy. I have created an NURBS sphere and I want to adjust it to the arm, so I go to the component mode add some isosparms and then it happens!!! I can´t move any vertexes... but in the object mode I can move the hole object.
View 1 Replies View Relatedhow to add more edges to make a normal box with one segment on all sides into any shape I want.
3DS Max 2012
Windows 7 - 64 bit
AMD Radeon HD 6570M
Intel Core i7-2630QM CPU 2.00GHz, 6Gb Ram
As I import an OBJ into max (using 2012, but it was the same for previous versions too) I edit the objects and as I delete some edges to refine it, it looks as if I break the object/polygon flow. Black smears appear near edges, none of the polys are black so I don't think it's a normals problem.
View 6 Replies View RelatedI have this cylinder (purple) that I want to cut into this smooth curved sheet.
I have thought about booleans but I don't understand why the stack closes and how to smooth the new sharp edges created when i do it.
How would you go about it?
The aim is to create a cylindrical opening in the sheet while maintaing the smoothing, while getting the edges themselves smoothed.
My stack is EditPoly, TurboSmooth, Bend, Box.
lowpoly but their edges are not showing. The edges that im talking about is the one that makes the model blocky, or look really low poly. what technique shall i use ?
3d models [URL]